Date: Sat, 4 Feb 2012 20:54:11 GMT From: James Shupe <jshupe@hermetek.com> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/164773: 9.0 amd64 fails to boot on HP DL145 G3 Message-ID: <201202042054.q14KsBTm016503@red.freebsd.org> Resent-Message-ID: <201202042100.q14L0M0t065658@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 164773
>Category: misc
>Synopsis: 9.0 amd64 fails to boot on HP DL145 G3
>Confidential: no
>Severity: critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Feb 04 21:00:22 UTC 2012
>Closed-Date:
>Last-Modified:
>Originator: James Shupe
>Release: 8.1p5
>Organization:
HermeTek Network Solutions
>Environment:
FreeBSD alcor.hermetek.com 8.1-RELEASE-p5 FreeBSD 8.1-RELEASE-p5 #0: Tue Sep 27 16:49:00 UTC 2011 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
I attempted to update a HP DL145 G3 server from 8.1p5 to 9.0p0 today and found that it hangs at "Root mount waiting for: usbus2".
The issue was incurred after running:
freebsd-update upgrade -r 9.0-RELEASE
freebsd-update install
shutdown -r now
I tried various things to disable USB in the boot loader, like:
set hint.usb.0.disabled=1
set hint.ehci.0.disabled=1
And also things like:
set vfs.root.mountfrom=ufs:/dev/da0s1a
set rootdev=disk0s1a
but it seemed to ignore them and the result was the exact same each time.
I've attached a working 8.1 /var/run/dmesg.boot along with the output of the 9.0 dmesg. Also, disabling ACPI causes 9.0 to panic and reboot.
----------------------------------------------------------------
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p5 #0: Tue Sep 27 16:49:00 UTC 2011
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual-Core AMD Opteron(tm) Processor 2214 HE (2194.51-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f12 Family = f Model = 41 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
real memory = 2147483648 (2048 MB)
avail memory = 2047459328 (1952 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD XSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic SAS/SATA Adapter> port 0x2000-0x20ff mem 0xdfa10000-0xdfa13fff,0xdfa00000-0xdfa0ffff irq 16 at device 1.0 on pci2
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.13.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 1 Active Volume (2 Max)
mpt0: 2 Hidden Drive Members (10 Max)
atapci0: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 2.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem 0xdfc05000-0xdfc05fff irq 10 at device 3.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem 0xdfc06000-0xdfc06fff irq 10 at device 3.1 on pci0
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem 0xdfc07000-0xdfc07fff irq 10 at device 3.2 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdfc00000-0xdfc03fff,0xdf000000-0xdf7fffff irq 23 at device 4.0 on pci0
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 32 at device 8.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 32 at device 10.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib8
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xdfb10000-0xdfb1ffff,0xdfb00000-0xdfb0ffff irq 36 at device 4.0 on pci8
miibus0: <MII bus> on bge0
brgphy0: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:18:71:87:00:37
bge0: [ITHREAD]
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xdfb30000-0xdfb3ffff,0xdfb20000-0xdfb2ffff irq 36 at device 4.1 on pci8
miibus1: <MII bus> on bge1
brgphy1: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:18:71:87:52:d8
bge1: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (9600,n,8,1)
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <(0x1166)> at usbus0
uhub0: <(0x1166) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <(0x1166)> at usbus1
uhub1: <(0x1166) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <(0x1166)> at usbus2
uhub2: <(0x1166) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
mpt0: mpt_read_cfg_page: Config Info Status 22
mpt0:vol0(mpt0:0:0): mpt_refresh_raid_vol: Failed to read RAID Vol Page(0)
mpt0:vol0(mpt0:0:0): Settings ( )
mpt0:vol0(mpt0:0:0): 0 Members:
mpt0:vol0(mpt0:0:0): RAID-0 - Optimal
(mpt0:0:9): Physical (mpt0:0:9:0), Pass-thru (mpt0:1:0:0)
(mpt0:0:9): Online
(mpt0:0:2): Physical (mpt0:0:2:0), Pass-thru (mpt0:1:1:0)
(mpt0:0:2): Online
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
ugen2.2: <vendor 0x04cc> at usbus2
uhub3: <vendor 0x04cc product 0x1520, class 9/0, rev 2.00/2.00, addr 2> on usbus2
uhub3: 3 ports with 3 removable, self powered
da0 at mpt0 bus 0 scbus0 target 1 lun 0
da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 75340MB (154296320 512 byte sectors: 255H 63S/T 9604C)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s1a
ugen1.2: <ServerEngines> at usbus1
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1
kbd2 at ukbd0
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on usbus1
ums0: 8 buttons and [XYZ] coordinates ID=0
----------------------------------------------------------------
FreeBSD 9.0 boot output (captured via serial console):
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012
root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Dual-Core AMD Opteron(tm) Processor 2214 HE (2194.56-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f12 Family = f Model = 41 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
real memory = 2147483648 (2048 MB)
avail memory = 2038542336 (1944 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD XSDT> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic SAS/SATA Adapter> port 0x2000-0x20ff mem 0xdfa10000-0xdfa13fff,0xdfa00000-0xdfa0ffff irq 16 at device 1.0 on pci2
mpt0: MPI Version=1.5.13.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 1 Active Volume (2 Max)
mpt0: 2 Hidden Drive Members (10 Max)
atapci0: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 2.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem 0xdfc05000-0xdfc05fff irq 10 at device 3.0 on pci0
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem 0xdfc06000-0xdfc06fff irq 10 at device 3.1 on pci0
usbus1: <OHCI (generic) USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem 0xdfc07000-0xdfc07fff irq 10 at device 3.2 on pci0
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdfc00000-0xdfc03fff,0xdf000000-0xdf7fffff irq 23 at device 4.0 on pci0
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 32 at device 8.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 32 at device 10.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib8
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xdfb10000-0xdfb1ffff,0xdfb00000-0xdfb0ffff irq 36 at device 4.0 on pci8
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X
miibus0: <MII bus> on bge0
brgphy0: <BCM5714 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:18:71:87:00:37
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xdfb30000-0xdfb3ffff,0xdfb20000-0xdfb2ffff irq 36 at device 4.1 on pci8
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X
miibus1: <MII bus> on bge1
brgphy1: <BCM5714 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:18:71:87:52:d8
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x1166> at usbus0
uhub0: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <0x1166> at usbus1
uhub1: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <0x1166> at usbus2
uhub2: <0x1166 EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
mpt0: mpt_read_cfg_page: Config Info Status 22
mpt0:vol0(mpt0:0:0): mpt_refresh_raid_vol: Failed to read RAID Vol Page(0)
mpt0:vol0(mpt0:0:0): Settings ( )
mpt0:vol0(mpt0:0:0): 0 Members:
mpt0:vol0(mpt0:0:0): RAID-0 - Optimal
(mpt0:0:9): Physical (mpt0:0:9:0), Pass-thru (mpt0:1:0:0)
(mpt0:0:9): Online
(mpt0:0:2): Physical (mpt0:0:2:0), Pass-thru (mpt0:1:1:0)
(mpt0:0:2): Online
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
da0 at mpt0 bus 0 scbus0 target 1 lun 0
da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 75340MB (154296320 512 byte sectors: 255H 63S/T 9604C)
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus2
>How-To-Repeat:
Attempt to boot 9.0-GENERIC amd64 on a HP DL145 G3 machine.
>Fix:
I rolled back to 8.1 but am willing to provide any additional information you may need, as well as try patches on a spare server.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201202042054.q14KsBTm016503>