Date: Sun, 20 Nov 2005 17:49:44 -0300 (ART) From: Rafael Caesar Lenzi <rc_lenzi@yahoo.com.br> To: current@freebsd.org Cc: snezhko@indorsoft.ru Subject: Re: PPPoE and SATA problems in 7-CURRENT-SNAP009 Message-ID: <20051120204944.47606.qmail@web51009.mail.yahoo.com> In-Reply-To: <umzjzp3po.fsf@indorsoft.ru>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] --- Victor Snezhko <snezhko@indorsoft.ru> escreveu: > As my telepathy module says, this is an INET6 problem that was fixed > 4 days ago, i.e., after the SNAP009 was generated. You can either cvsup > to the fresh -current or disable INET6. Well, i make a cvsup and get fresh copy of -current kernel. The pppoe is more stable, but sometimes is happen. Any suggestion for problem of SATA controller? Thanks, Rafael _______________________________________________________ Yahoo! Acesso Grátis: Internet rápida e grátis. Instale o discador agora! http://br.acesso.yahoo.com/ [-- Attachment #2 --] pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xce085000-0xce085fff irq 5 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xce085000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xce082000-0xce082fff irq 12 at device 2.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xce082000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: <NVIDIA nForce2 USB 2.0 controller> mem 0xce083000-0xce0830ff irq 11 at device 2.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xce083000 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <NVIDIA nForce2 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered pci0: <network, ethernet> at device 4.0 (no driver attached) pci0: <multimedia, audio> at device 5.0 (no driver attached) pci0: <multimedia, audio> at device 6.0 (no driver attached) pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xa000-0xbfff pcib1: memory decode 0xcc000000-0xcdffffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1095, dev=0x3112, revid=0x01 bus=1, slot=11, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000a000, size 3, enabled pcib1: (null) requested I/O range 0xa000-0xa007: in range map[14]: type 4, range 32, base 0000a400, size 2, enabled pcib1: (null) requested I/O range 0xa400-0xa403: in range map[18]: type 4, range 32, base 0000a800, size 3, enabled pcib1: (null) requested I/O range 0xa800-0xa807: in range map[1c]: type 4, range 32, base 0000ac00, size 2, enabled pcib1: (null) requested I/O range 0xac00-0xac03: in range map[20]: type 4, range 32, base 0000b000, size 4, enabled pcib1: (null) requested I/O range 0xb000-0xb00f: in range map[24]: type 1, range 32, base cd000000, size 9, enabled pcib1: (null) requested memory range 0xcd000000-0xcd0001ff: good $PIR: 1:11 INTA routed to irq 11 atapci0: <SiI 3112 SATA150 controller> port 0xa000-0xa007,0xa400-0xa403,0xa800-0xa807,0xac00-0xac03,0xb000-0xb00f mem 0xcd000000-0xcd0001ff irq 11 at device 11.0 on pci1 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb000 atapci0: [MPSAFE] atapci0: Reserved 0x200 bytes for rid 0x24 type 3 at 0xcd000000 ata2: <ATA channel 0> on atapci0 ata2: SATA connect ready time=0ms ata2: sata_connect devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: <ATA channel 1> on atapci0 ata3: SATA connect status=00000000 ata3: [MPSAFE] atapci1: <nVidia nForce2 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] pcib2: <PCIBIOS PCI-PCI bridge> at device 12.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xc8000000-0xc9ffffff pcib2: prefetched decode 0xfff00000-0xfffff pci2: <PCI bus> on pcib2 pci2: physical bus=2 found-> vendor=0x10b7, dev=0x9201, revid=0x40 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000c000, size 7, enabled pcib2: (null) requested I/O range 0xc000-0xc07f: in range map[14]: type 1, range 32, base c9000000, size 7, enabled pcib2: (null) requested memory range 0xc9000000-0xc900007f: good $PIR: 2:1 INTA routed to irq 5 pci2: <network, ethernet> at device 1.0 (no driver attached) pcib3: <PCI-PCI bridge> at device 30.0 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xca000000-0xcbffffff pcib3: prefetched decode 0xc0000000-0xc7ffffff pci3: <PCI bus> on pcib3 pci3: physical bus=3 found-> vendor=0x10de, dev=0x0110, revid=0xb2 bus=3, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base ca000000, size 24, enabled pcib3: (null) requested memory range 0xca000000-0xcaffffff: good map[14]: type 3, range 32, base c0000000, size 27, enabled pcib3: (null) requested memory range 0xc0000000-0xc7ffffff: good $PIR: Found IRQ 12 for link 0x4 from 5 11 12 $PIR: ROUTE_INTERRUPT failed. pci3: <display, VGA> at device 0.0 (no driver attached) ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnpbios: 16 devices, largest 98 bytes PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x81-0x83, size=0x3, align=0 PNP0200: adding io range 0x87-0x87, size=0x1, align=0 PNP0200: adding io range 0x89-0x8b, size=0x3, align=0 PNP0200: adding io range 0x8f-0x91, size=0x3, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 pnpbios: handle 1 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 pnpbios: handle 2 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 pnpbios: handle 3 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 pnpbios: handle 4 device ID PNP0303 (0303d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 5 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 pnpbios: handle 6 device ID PNP0c04 (040cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0xffffff, size=0xf00000 pnpbios: handle 7 device ID PNP0c01 (010cd041) PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000 PNP0c02: adding fixed memory32 range 0xd7800-0xd7fff, size=0x800 pnpbios: handle 8 device ID PNP0c02 (020cd041) PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 pnpbios: handle 9 device ID PNP0a03 (030ad041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 pnpbios: handle 11 device ID PNP0501 (0105d041) PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0 PNP0700: adding irq mask 0x40 pnpbios: handle 12 device ID PNP0700 (0007d041) PNP0401: adding dma mask 0x8 PNP0401: adding irq mask 0x80 PNP0401: adding io range 0x378-0x37f, size=0x8, align=0 PNP0401: adding io range 0x778-0x77f, size=0x8, align=0 pnpbios: handle 14 device ID PNP0401 (0104d041) PNP0501: adding irq mask 0x8 PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0 pnpbios: handle 15 device ID PNP0501 (0105d041) PNPb006: adding irq mask 0x400 PNPb006: adding io range 0x330-0x333, size=0x4, align=0 pnpbios: handle 16 device ID PNPb006 (06b0d041) PNPb02f: adding io range 0x201-0x201, size=0x1, align=0 pnpbios: handle 17 device ID PNPb02f (2fb0d041) pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd47ff,0xd5000-0xd67ff,0xd7000-0xd77ff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0067 psm0: strange result for test aux port (2). psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ic_type 90 part_id 80 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1801 0x1811 0x1801 0x1801 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x1801 0x1809 0x1801 0x1801 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 pnpid PNP0303 on isa0 unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0 unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff pnpid PNP0501 on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f0-0x3f5 pnpid PNP0700 on isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0401> at port 0x378-0x37f pnpid PNP0401 on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x2f8-0x2ff pnpid PNP0501 on isa0 unknown: <PNPb006> failed to probe at port 0x330-0x333 irq 10 pnpid PNPb006 on isa0 unknown: <PNPb02f> failed to probe at port 0x201 pnpid PNPb02f on isa0 ugen0: vendor 0x046d Camera, rev 1.00/1.00, addr 2 Device configuration finished. procfs registered Timecounter "TSC" frequency 2004558631 Hz quality 800 Timecounters tick every 1.000 msec IP Filter: v4.1.8 initialized. Default = pass all, Logging = disabled lo0: bpf attached ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging disabled ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire atapicam: atapicam0 already exists; skipping it ad0: setting PIO4 on nVidia nForce2 chip ad0: setting UDMA133 on nVidia nForce2 chip ad0: 58644MB <Maxtor 6Y060L0 YAR41VW0> at ata0-master UDMA133 ad0: 120103200 sectors [119150C/16H/63S] 16 sectors/interrupt 1 depth queue ad0: nVidia check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire acd0: setting PIO4 on nVidia nForce2 chip acd0: setting UDMA33 on nVidia nForce2 chip acd0: <HL-DT-ST DVDRAM GSA-4165B/DL03> DVDR drive at ata1 as master acd0: read 6890KB/s (6890KB/s) write 1722KB/s (1722KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-RW 120mm data disc acd1: setting PIO4 on nVidia nForce2 chip acd1: setting UDMA33 on nVidia nForce2 chip acd1: <LG DVD-ROM DRD-8160B/1.01> DVDROM drive at ata1 as slave acd1: read 2750KB/s (8250KB/s), 512KB buffer, UDMA33 acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd1: Writes: acd1: Audio: play, 255 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: CD-R 120mm audio disc ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 190782MB <Seagate ST3200822AS 3.01> at ata2-master SATA150 ad4: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: Silicon Image check3 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed GEOM: new disk ad0 GEOM: new disk ad4 acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe1:ata1:0:1:0): error 22 (probe1:ata1:0:1:0): Unretryable Error (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe1:ata1:0:1:0): error 22 (probe1:ata1:0:1:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: <HL-DT-ST DVDRAM GSA-4165B DL03> Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers pass1 at ata1 bus 0 target 1 lun 0 pass1: <LG DVD-ROM DRD8160B 1.01> Removable CD-ROM SCSI-0 device pass1: 33.000MB/s transfers ATA PseudoRAID loaded cd0 at ata1 bus 0 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GSA-4165B DL03> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: cd present [303320 x 2048 byte records] cd1 at ata1 bus 0 target 1 lun 0 cd1: <LG DVD-ROM DRD8160B 1.01> Removable CD-ROM SCSI-0 device cd1: 33.000MB/s transfers cd1: cd present [233942 x 2048 byte records] acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 error=4<ABORTED> GEOM: new disk cd0 GEOM: new disk cd1 (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 4 a0 d7 0 0 1 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error (cd0:ata1:0:0:0): SCSI Status: Check Condition (cd0:ata1:0:0:0): ILLEGAL REQUEST csi:28,0,0,90 asc:64,0 (cd0:ata1:0:0:0): Illegal mode for this track (cd0:ata1:0:0:0): (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 4 a0 d7 0 0 1 0 (cd0:ata1:0:0:0): ILLEGAL REQUEST csi:28,0,0,90 asc:64,0 (cd0:ata1:0:0:0): Illegal mode for this track Unretryable error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): cddone: got error 0x6 back (cd1:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (cd1:ata1:0:1:0): CAM Status: SCSI Status Error (cd1:ata1:0:1:0): SCSI Status: Check Condition (cd1:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 (cd1:ata1:0:1:0): Illegal mode for this track (cd1:ata1:0:1:0): (cd1:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (cd1:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 (cd1:ata1:0:1:0): Illegal mode for this track Unretryable error (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error (cd1:ata1:0:1:0): cddone: got error 0x6 back (cd1:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0 (cd1:ata1:0:1:0): CAM Status: SCSI Status Error (cd1:ata1:0:1:0): SCSI Status: Check Condition (cd1:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 (cd1:ata1:0:1:0): Illegal mode for this track (cd1:ata1:0:1:0): (cd1:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0 (cd1:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 (cd1:ata1:0:1:0): Illegal mode for this track Unretryable error (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error (cd1:ata1:0:1:0): cddone: got error 0x6 back (cd1:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (cd1:ata1:0:1:0): CAM Status: SCSI Status Error (cd1:ata1:0:1:0): SCSI Status: Check Condition (cd1:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 (cd1:ata1:0:1:0): Illegal mode for this track (cd1:ata1:0:1:0): (cd1:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (cd1:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 (cd1:ata1:0:1:0): Illegal mode for this track Unretryable error (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error (cd1:ata1:0:1:0): cddone: got error 0x6 back (cd1:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0 (cd1:ata1:0:1:0): CAM Status: SCSI Status Error (cd1:ata1:0:1:0): SCSI Status: Check Condition (cd1:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 (cd1:ata1:0:1:0): Illegal mode for this track (cd1:ata1:0:1:0): (cd1:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0 (cd1:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 (cd1:ata1:0:1:0): Illegal mode for this track Unretryable error (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error (cd1:ata1:0:1:0): cddone: got error 0x6 back Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init splash: image decoder found: logo_saver pci0: driver added found-> vendor=0x10de, dev=0x01eb, revid=0xc1 bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:1: reprobing on driver added found-> vendor=0x10de, dev=0x01ee, revid=0xc1 bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:2: reprobing on driver added found-> vendor=0x10de, dev=0x01ed, revid=0xc1 bus=0, slot=0, func=3 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:3: reprobing on driver added found-> vendor=0x10de, dev=0x01ec, revid=0xc1 bus=0, slot=0, func=4 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:4: reprobing on driver added found-> vendor=0x10de, dev=0x01ef, revid=0xc1 bus=0, slot=0, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:5: reprobing on driver added found-> vendor=0x10de, dev=0x0064, revid=0xa2 bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 pci0:1:1: reprobing on driver added found-> vendor=0x10de, dev=0x0066, revid=0xa1 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 pci0:4:0: reprobing on driver added found-> vendor=0x10de, dev=0x006b, revid=0xa2 bus=0, slot=5, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x0c (3000 ns) intpin=a, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 pci0:5:0: reprobing on driver added found-> vendor=0x10de, dev=0x006a, revid=0xa1 bus=0, slot=6, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 pci0:6:0: reprobing on driver added pci1: driver added pci2: driver added found-> vendor=0x10b7, dev=0x9201, revid=0x40 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 pci2:1:0: reprobing on driver added xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xc000-0xc07f mem 0xc9000000-0xc900007f irq 5 at device 1.0 on pci2 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xc9000000 xl0: using memory mapped I/O xl0: media options word: 40 xl0: found MII/AUTO miibus0: <MII bus> on xl0 acphy0: <AC101L 10/100 media interface> on miibus0 acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:26:54:13:43:56 xl0: [MPSAFE] pci3: driver added found-> vendor=0x10de, dev=0x0110, revid=0xb2 bus=3, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci3:0:0: reprobing on driver added xl0: link state changed to DOWN xl0: link state changed to UP pci0: driver added found-> vendor=0x10de, dev=0x01eb, revid=0xc1 bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:1: reprobing on driver added found-> vendor=0x10de, dev=0x01ee, revid=0xc1 bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:2: reprobing on driver added found-> vendor=0x10de, dev=0x01ed, revid=0xc1 bus=0, slot=0, func=3 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:3: reprobing on driver added found-> vendor=0x10de, dev=0x01ec, revid=0xc1 bus=0, slot=0, func=4 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:4: reprobing on driver added found-> vendor=0x10de, dev=0x01ef, revid=0xc1 bus=0, slot=0, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:5: reprobing on driver added found-> vendor=0x10de, dev=0x0064, revid=0xa2 bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 pci0:1:1: reprobing on driver added found-> vendor=0x10de, dev=0x0066, revid=0xa1 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 pci0:4:0: reprobing on driver added nve0: <NVIDIA nForce MCP2 Networking Adapter> port 0xe400-0xe407 mem 0xce084000-0xce084fff irq 12 at device 4.0 on pci0 nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xce084000 nve0: Ethernet address 00:0c:6e:d9:6f:eb miibus1: <MII bus> on nve0 rlphy0: <RTL8201L 10/100 media interface> on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nve0: bpf attached nve0: Ethernet address: 00:0c:6e:d9:6f:eb nve0: [GIANT-LOCKED] found-> vendor=0x10de, dev=0x006b, revid=0xa2 bus=0, slot=5, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x0c (3000 ns) intpin=a, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 pci0:5:0: reprobing on driver added found-> vendor=0x10de, dev=0x006a, revid=0xa1 bus=0, slot=6, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 pci0:6:0: reprobing on driver added pci1: driver added pci2: driver added pci3: driver added found-> vendor=0x10de, dev=0x0110, revid=0xb2 bus=3, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci3:0:0: reprobing on driver added nve0: link state changed to DOWN tun0: bpf attached WARNING: attempt to net_add_domain(netgraph) after domainfinalize() ata2: reiniting channel .. ata2: SATA connect ready time=0ms ata2: sata_connect devices=0x1<ATA_MASTER> ad4: req=0xc41237d0 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !! ad4: req=0xc41237d0 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051120204944.47606.qmail>