Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 12 Aug 2004 02:48:55 +0200
From:      "Daniel Eriksson" <daniel_k_eriksson@telia.com>
To:        "'Nate Lawson'" <nate@root.org>
Cc:        freebsd-current@freebsd.org
Subject:   RE: cvs commit: src/sys/dev/acpica acpi_pci_link.c acpi_pcib.c acpi_pcib_acpi.c acpi_pcib_pci.c acpi_pcibvar.h
Message-ID:  <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAAq9/9/6MB40iogQmQ3%2BKkagEAAAAA@telia.com>
In-Reply-To: <411A5A12.2070404@root.org>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.

------=_NextPart_000_0000_01C48016.E936E020
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit

Nate Lawson wrote:

> I need the dmesg output from boot -v to see the link priority 
> settings.

Attached is the "boot -v" output from two separate boots with a kernel built
from sources dated 2004.08.11.21.00.00 (after your patch with additional
debug output).

The two logs (with "PnP OS installed" set to Yes or No in BIOS) are pretty
similar, so I don't think that setting in the BIOS makes much difference for
your code.

The next thing to try (I guess) is a kernel without "device apic". However,
my users are a bit upset about the downtime (already 3 reboots today) so I
might have to wait with that until tomorrow.

/Daniel Eriksson

------=_NextPart_000_0000_01C48016.E936E020
Content-Type: text/plain;
	name="boot_PnP_no.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="boot_PnP_no.txt"

KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=3D01 base=3D0000000000000000 len=3D000000000009d000
SMAP type=3D02 base=3D000000000009d000 len=3D0000000000003000
SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000
SMAP type=3D01 base=3D0000000000100000 len=3D000000004fefb000
SMAP type=3D03 base=3D000000004fffb000 len=3D0000000000004000
SMAP type=3D04 base=3D000000004ffff000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000ffff0000 len=3D0000000000010000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights =
reserved.
FreeBSD 5.2-CURRENT #2: Thu Aug 12 01:23:35 CEST 2004
    daniel@fortify.satra.zapto.org:/usr/obj/usr/src/sys/FORTIFY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc089b000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc089b254.
Calibrating clock(s) ... i8254 clock: 1193226 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1999782501 Hz
CPU: AMD Athlon(TM) XP 2500+ (1999.78-MHz 686-class CPU)
  Origin =3D "AuthenticAMD"  Id =3D 0x6a0  Stepping =3D 0
  =
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=3D0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way =
associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way =
associative
real memory  =3D 1342156800 (1279 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000004e94afff, 1305628672 bytes (318757 pages)
avail memory =3D 1305075712 (1244 MB)
Table 'FACP' at 0x4fffb0b2
Table 'BOOT' at 0x4fffb030
Table 'APIC' at 0x4fffb058
MADT: Found table at 0x4fffb058
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <ASUS   A7V600-X>
bios32: Found BIOS32 Service Directory header at 0xc00f2000
bios32: Entry =3D 0xf1940 (c00f1940)  Rev =3D 0  Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0x1970
pnpbios: Found PnP BIOS data at 0xc00f9cb0
pnpbios: Entry =3D f0000:9ce0  Rev =3D 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V600-X> on motherboard
acpi0: [GIANT-LOCKED]
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a):   mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D31891106)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00f1f20
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
slot 1      0   12    A   0x05  3 4 5 7 9 10 11 12
slot 1      0   12    B   0x01  3 4 5 7 9 10 11 12
slot 1      0   12    C   0x02  3 4 5 7 9 10 11 12
slot 1      0   12    D   0x03  3 4 5 7 9 10 11 12
slot 2      0   13    A   0x01  3 4 5 7 9 10 11 12
slot 2      0   13    B   0x02  3 4 5 7 9 10 11 12
slot 2      0   13    C   0x03  3 4 5 7 9 10 11 12
slot 2      0   13    D   0x05  3 4 5 7 9 10 11 12
slot 3      0   14    A   0x02  3 4 5 7 9 10 11 12
slot 3      0   14    B   0x03  3 4 5 7 9 10 11 12
slot 3      0   14    C   0x05  3 4 5 7 9 10 11 12
slot 3      0   14    D   0x01  3 4 5 7 9 10 11 12
slot 4      0   19    A   0x03  3 4 5 7 9 10 11 12
slot 4      0   19    B   0x05  3 4 5 7 9 10 11 12
slot 4      0   19    C   0x01  3 4 5 7 9 10 11 12
slot 4      0   19    D   0x02  3 4 5 7 9 10 11 12
slot 5      0   11    A   0x05  3 4 5 7 9 10 11 12
slot 5      0   11    B   0x01  3 4 5 7 9 10 11 12
slot 5      0   11    C   0x02  3 4 5 7 9 10 11 12
slot 5      0   11    D   0x03  3 4 5 7 9 10 11 12
slot 6      0   10    A   0x01  3 4 5 7 9 10 11 12
slot 6      0   10    B   0x02  3 4 5 7 9 10 11 12
slot 6      0   10    C   0x03  3 4 5 7 9 10 11 12
slot 6      0   10    D   0x05  3 4 5 7 9 10 11 12
slot 7      1    0    A   0x01  3 4 5 7 9 10 11 12
slot 7      1    0    B   0x02  3 4 5 7 9 10 11 12
embedded    0   15    A   0x06  3 4 5 7 9 10 11 12
embedded    0   15    B   0x07  3 4 5 7 9 10 11 12
embedded    0   16    A   0x06  3 4 5 7 9 10 11 12
embedded    0   16    B   0x07  3 4 5 7 9 10 11 12
embedded    0   16    C   0x08  3 4 5 7 9 10 11 12
embedded    0   16    D   0x09  3 4 5 7 9 10 11 12
embedded    0   17    C   0x08  3 4 5 7 9 10 11 12
embedded    0   17    D   0x09  3 4 5 7 9 10 11 12
embedded    0   18    A   0x06  3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 18 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 4
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 5
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=3D0x1106, dev=3D0x3189, revid=3D0x80
        bus=3D0, slot=3D0, func=3D0
        class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0006, statreg=3D0x2230, cachelnsz=3D0 (dwords)
        lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        powerspec 2  supports D0 D3  current D0
found-> vendor=3D0x1106, dev=3D0xb198, revid=3D0x00
        bus=3D0, slot=3D1, func=3D0
        class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
        cmdreg=3D0x0007, statreg=3D0x2230, cachelnsz=3D0 (dwords)
        lattimer=3D0x00 (0 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 =
(0 ns)
        map[10]: type 4, range 32, base 0000d800, size  3, enabled
        map[14]: type 4, range 32, base 0000d400, size  2, enabled
        map[18]: type 4, range 32, base 0000d000, size  3, enabled
        map[1c]: type 4, range 32, base 0000b800, size  2, enabled
        map[20]: type 4, range 32, base 0000b400, size  8, enabled
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D10, func=3D0
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D11
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 0000b000, size  3, enabled
        map[14]: type 4, range 32, base 0000a800, size  2, enabled
        map[18]: type 4, range 32, base 0000a400, size  3, enabled
        map[1c]: type 4, range 32, base 0000a000, size  2, enabled
        map[20]: type 4, range 32, base 00009800, size  8, enabled
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D10, func=3D1
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D11
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00009400, size  8, enabled
        map[14]: type 1, range 64, base ed800000, size 12, enabled
found-> vendor=3D0x9005, dev=3D0x0080, revid=3D0x02
        bus=3D0, slot=3D12, func=3D0
        class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0017, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x28 (10000 ns), =
maxlat=3D0x19 (6250 ns)
        intpin=3Da, irq=3D3
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00009000, size  3, enabled
        map[14]: type 4, range 32, base 00008800, size  2, enabled
        map[18]: type 4, range 32, base 00008400, size  3, enabled
        map[1c]: type 4, range 32, base 00008000, size  2, enabled
        map[20]: type 4, range 32, base 00007800, size  8, enabled
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D14, func=3D0
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D10
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00007400, size  3, enabled
        map[14]: type 4, range 32, base 00007000, size  2, enabled
        map[18]: type 4, range 32, base 00006800, size  3, enabled
        map[1c]: type 4, range 32, base 00006400, size  2, enabled
        map[20]: type 4, range 32, base 00006000, size  8, enabled
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D14, func=3D1
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D10
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00005800, size  3, enabled
        map[14]: type 4, range 32, base 00005400, size  2, enabled
        map[18]: type 4, range 32, base 00005000, size  3, enabled
        map[1c]: type 4, range 32, base 00004800, size  2, enabled
        map[20]: type 4, range 32, base 00004400, size  4, enabled
        map[24]: type 4, range 32, base 00004000, size  8, enabled
found-> vendor=3D0x1106, dev=3D0x3149, revid=3D0x80
        bus=3D0, slot=3D15, func=3D0
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Db, irq=3D9
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 00003800, size  4, enabled
found-> vendor=3D0x1106, dev=3D0x0571, revid=3D0x06
        bus=3D0, slot=3D15, func=3D1
        class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Da, irq=3D14
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 00003400, size  5, enabled
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D0
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Da, irq=3D5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[20]: type 4, range 32, base 00003000, size  5, enabled
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D1
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Da, irq=3D5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[20]: type 4, range 32, base 00002800, size  5, enabled
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D2
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Db, irq=3D9
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[20]: type 4, range 32, base 00002400, size  5, enabled
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D3
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Db, irq=3D9
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 1, range 32, base ed000000, size  8, enabled
found-> vendor=3D0x1106, dev=3D0x3104, revid=3D0x86
        bus=3D0, slot=3D16, func=3D4
        class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Dc, irq=3D11
        powerspec 2  supports D0 D1 D2 D3  current D0
found-> vendor=3D0x1106, dev=3D0x3227, revid=3D0x00
        bus=3D0, slot=3D17, func=3D0
        class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0087, statreg=3D0x0210, cachelnsz=3D0 (dwords)
        lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00002000, size  8, enabled
        map[14]: type 1, range 32, base ec800000, size  8, enabled
found-> vendor=3D0x1106, dev=3D0x3065, revid=3D0x78
        bus=3D0, slot=3D18, func=3D0
        class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0097, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x08 =
(2000 ns)
        intpin=3Da, irq=3D5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 4, range 32, base 00001800, size  8, enabled
        map[14]: type 1, range 32, base ec000000, size  8, enabled
found-> vendor=3D0x10ec, dev=3D0x8169, revid=3D0x10
        bus=3D0, slot=3D19, func=3D0
        class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0017, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x20 (8000 ns), maxlat=3D0x40 =
(16000 ns)
        intpin=3Da, irq=3D12
        powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem =
0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 240M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xe000-0xdfff
pcib1:   memory decode     0xee000000-0xefdfffff
pcib1:   prefetched decode 0xeff00000-0xf7ffffff
ACPI PCI link initial configuration:
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=3D1
        map[10]: type 1, range 32, base ee000000, size 24, enabled
pcib1: device (null) requested decoded memory range =
0xee000000-0xeeffffff
        map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib1: device (null) requested decoded memory range =
0xf0000000-0xf7ffffff
found-> vendor=3D0x10de, dev=3D0x0150, revid=3D0xa3
        bus=3D1, slot=3D0, func=3D0
        class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x05 (1250 ns), =
maxlat=3D0x01 (250 ns)
        intpin=3Da, irq=3D11
        powerspec 1  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port =
0xb400-0xb4ff,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 =
irq 11 at device 10.0 on pci0
atapci0: Reserved 0x100 bytes for rid 0x20 type 4 at 0xb400
atapci0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd400
ata2: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata2-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata2: at 0xd800 on atapci0
ata2: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd000
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800
ata3: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata3-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata3-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata3: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata3: at 0xd000 on atapci0
ata3: [MPSAFE]
atapci1: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port =
0x9800-0x98ff,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xb000-0xb007 =
irq 11 at device 10.1 on pci0
atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0x9800
atapci1: [MPSAFE]
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xb000
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xa800
ata4: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata4-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata4-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata4: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata4: at 0xb000 on atapci1
ata4: [MPSAFE]
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xa400
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xa000
ata5: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata5-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata5-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata5: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata5: at 0xa400 on atapci1
ata5: [MPSAFE]
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x9400-0x94ff mem =
0xed800000-0xed800fff irq 3 at device 12.0 on pci0
ahc0: Defaulting to MEMIO on
ahc0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xed800000
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 423 instructions downloaded
ahc0: Features 0x1def6, Bugs 0x40, Flags 0x20485560
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
atapci2: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port =
0x7800-0x78ff,0x8000-0x8003,0x8400-0x8407,0x8800-0x8803,0x9000-0x9007 =
irq 10 at device 14.0 on pci0
atapci2: Reserved 0x100 bytes for rid 0x20 type 4 at 0x7800
atapci2: [MPSAFE]
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9000
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8800
ata6: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata6-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata6-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata6: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata6: at 0x9000 on atapci2
ata6: [MPSAFE]
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x8400
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x8000
ata7: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata7-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata7-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata7: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata7: at 0x8400 on atapci2
ata7: [MPSAFE]
atapci3: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port =
0x6000-0x60ff,0x6400-0x6403,0x6800-0x6807,0x7000-0x7003,0x7400-0x7407 =
irq 10 at device 14.1 on pci0
atapci3: Reserved 0x100 bytes for rid 0x20 type 4 at 0x6000
atapci3: [MPSAFE]
atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0x7400
atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0x7000
ata8: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D01
ata8-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata8-slave:  stat=3D0x01 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata8: reset tp2 stat0=3D50 stat1=3D01 devices=3D0x1<ATA_MASTER>
ata8: at 0x7400 on atapci3
ata8: [MPSAFE]
atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0x6800
atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0x6400
ata9: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata9-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata9-slave:  stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata9: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata9: at 0x6800 on atapci3
ata9: [MPSAFE]
atapci4: <VIA 6420 SATA150 controller> port =
0x4000-0x40ff,0x4400-0x440f,0x4800-0x4803,0x5000-0x5007,0x5400-0x5403,0x5=
800-0x5807 irq 9 at device 15.0 on pci0
atapci4: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4400
atapci4: [MPSAFE]
atapci4: Reserved 0x8 bytes for rid 0x10 type 4 at 0x5800
atapci4: Reserved 0x4 bytes for rid 0x14 type 4 at 0x5400
ata10: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D7f
ata10-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10: reset tp2 stat0=3D50 stat1=3Dff devices=3D0x1<ATA_MASTER>
ata10: at 0x5800 on atapci4
ata10: [MPSAFE]
atapci4: Reserved 0x8 bytes for rid 0x18 type 4 at 0x5000
atapci4: Reserved 0x4 bytes for rid 0x1c type 4 at 0x4800
ata11: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D7f
ata11-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11: reset tp2 stat0=3D50 stat1=3Dff devices=3D0x1<ATA_MASTER>
ata11: at 0x5000 on atapci4
ata11: [MPSAFE]
atapci5: <VIA 8237 UDMA133 controller> port =
0x3800-0x380f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 14 at device 15.1 =
on pci0
atapci5: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3800
atapci5: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci5: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci5
ata0: [MPSAFE]
atapci5: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci5: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata1-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata1: at 0x170 irq 15 on atapci5
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0x3400-0x341f irq 5 at device =
16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x3000-0x301f irq 5 at device =
16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x2800-0x281f irq 9 at device =
16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2800
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x2400-0x241f irq 9 at device =
16.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2400
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xed000000-0xed0000ff irq 11 =
at device 16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xed000000
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x2000-0x20ff mem =
0xec800000-0xec8000ff irq 5 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:0e:a6:1f:29:1e
vr0: [GIANT-LOCKED]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1800
re0: <RealTek 8110S Single-chip Gigabit Ethernet> port 0x1800-0x18ff mem =
0xec000000-0xec0000ff irq 12 at device 19.0 on pci0
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, =
1000baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:50:fc:f8:c6:81
re0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on =
acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
sio0: irq maps: 0xc041 0xc051 0xc041 0xc041
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xc041 0xc041 0xc041 0xc041
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1999782501 Hz quality 800
Timecounters tick every 1.000 msec
DUMMYNET initialized (011031)
ipfw2 initialized, divert enabled, rule-based forwarding enabled, =
default to accept, logging unlimited
lo0: bpf attached
ata0-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: setting PIO4 on VIA 8237 chip
ata0-master: setting UDMA100 on VIA 8237 chip
ata0-slave: setting PIO4 on VIA 8237 chip
ata0-slave: setting UDMA100 on VIA 8237 chip
ad0: <ST3120022A/3.06> ATA-6 disk at ata0-master
ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 120031478784 end 120031511039
ad1: <ST3120022A/3.06> ATA-6 disk at ata0-slave
ad1: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
GEOM: Configure ad0s1a, start 0 length 536870912 end 536870911
GEOM: Configure ad0s1b, start 536870912 length 536870912 end 1073741823
GEOM: Configure ad0s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad0s1d, start 1073741824 length 536870912 end 1610612735
GEOM: Configure ad0s1e, start 1610612736 length 536870912 end 2147483647
GEOM: Configure ad0s1f, start 2147483648 length 10737418240 end =
12884901887
GEOM: Configure ad0s1g, start 12884901888 length 107146576896 end =
120031478783
GEOM: new disk ad1
ata1-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata1-master: setting PIO4 on VIA 8237 chip
ata1-master: setting UDMA100 on VIA 8237 chip
ata1-slave: setting PIO4 on VIA 8237 chip
ata1-slave: setting UDMA100 on VIA 8237 chip
ad2: <IC35L120AVV207-0/V24OA66A> ATA-6 disk at ata1-master
ad2: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ad3: <IC35L120AVV207-0/V24OA66A> ATA-6 disk at ata1-slave
ad3: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad3: 16 secs/int, 1 depth queue, UDMA100
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 120031478784 end 120031511039
ar: FreeBSD check1 failed
GEOM: new disk ad2
GEOM: new disk ad3
GEOM: Configure ad1s1b, start 536870912 length 536870912 end 1073741823
GEOM: Configure ad1s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad1s1d, start 0 length 536870912 end 536870911
GEOM: Configure ad1s1e, start 1073741824 length 536870912 end 1610612735
GEOM: Configure ad1s1f, start 1610612736 length 536870912 end 2147483647
GEOM: Configure ad1s1g, start 2147483648 length 10737418240 end =
12884901887
GEOM: Configure ad1s1h, start 12884901888 length 107146576896 end =
120031478783
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 123518997504 end 123519029759
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad3s1, start 32256 length 123518997504 end 123519029759
GEOM: Configure ad2s1c, start 0 length 123518997504 end 123518997503
GEOM: Configure ad2s1e, start 0 length 123518997504 end 123518997503
GEOM: Configure ad3s1c, start 0 length 123518997504 end 123518997503
GEOM: Configure ad3s1e, start 0 length 123518997504 end 123518997503
ata2-slave: FAILURE - ATA_IDENTIFY no interrupt
ata2-slave: FAILURE - ATA_IDENTIFY no interrupt
ata2-master: FAILURE - ATA_IDENTIFY no interrupt
ata2-master: FAILURE - ATA_IDENTIFY no interrupt
ata3-slave: FAILURE - ATA_IDENTIFY no interrupt
ata3-slave: FAILURE - ATA_IDENTIFY no interrupt
ata3-master: FAILURE - ATA_IDENTIFY no interrupt
ata3-master: FAILURE - ATA_IDENTIFY no interrupt
ata4-slave: FAILURE - ATA_IDENTIFY no interrupt
ata4-slave: FAILURE - ATA_IDENTIFY no interrupt
ata4-master: FAILURE - ATA_IDENTIFY no interrupt
ata4-master: FAILURE - ATA_IDENTIFY no interrupt
ata5-slave: FAILURE - ATA_IDENTIFY no interrupt
ata5-slave: FAILURE - ATA_IDENTIFY no interrupt
ata5-master: FAILURE - ATA_IDENTIFY no interrupt
ata5-master: FAILURE - ATA_IDENTIFY no interrupt
ata6-slave: FAILURE - ATA_IDENTIFY no interrupt
ata6-slave: FAILURE - ATA_IDENTIFY no interrupt
ata6-master: FAILURE - ATA_IDENTIFY no interrupt
ata6-master: FAILURE - ATA_IDENTIFY no interrupt
ata7-slave: FAILURE - ATA_IDENTIFY no interrupt
ata7-slave: FAILURE - ATA_IDENTIFY no interrupt
ata7-master: FAILURE - ATA_IDENTIFY no interrupt
ata7-master: FAILURE - ATA_IDENTIFY no interrupt
ata8-master: FAILURE - ATA_IDENTIFY no interrupt
ata8-master: FAILURE - ATA_IDENTIFY no interrupt
ata9-master: FAILURE - ATA_IDENTIFY no interrupt
ata9-master: FAILURE - ATA_IDENTIFY no interrupt
ata10-master: FAILURE - ATA_IDENTIFY no interrupt
ata10-master: FAILURE - ATA_IDENTIFY no interrupt
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.

------=_NextPart_000_0000_01C48016.E936E020
Content-Type: text/plain;
	name="boot_PnP_yes.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="boot_PnP_yes.txt"

KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=3D01 base=3D0000000000000000 len=3D000000000009d000
SMAP type=3D02 base=3D000000000009d000 len=3D0000000000003000
SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000
SMAP type=3D01 base=3D0000000000100000 len=3D000000004fefb000
SMAP type=3D03 base=3D000000004fffb000 len=3D0000000000004000
SMAP type=3D04 base=3D000000004ffff000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000ffff0000 len=3D0000000000010000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights =
reserved.
FreeBSD 5.2-CURRENT #2: Thu Aug 12 01:23:35 CEST 2004
    daniel@fortify.satra.zapto.org:/usr/obj/usr/src/sys/FORTIFY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc089b000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc089b254.
Calibrating clock(s) ... i8254 clock: 1193214 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1999782321 Hz
CPU: AMD Athlon(TM) XP 2500+ (1999.78-MHz 686-class CPU)
  Origin =3D "AuthenticAMD"  Id =3D 0x6a0  Stepping =3D 0
  =
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=3D0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way =
associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way =
associative
real memory  =3D 1342156800 (1279 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000004e94afff, 1305628672 bytes (318757 pages)
avail memory =3D 1305075712 (1244 MB)
Table 'FACP' at 0x4fffb0b2
Table 'BOOT' at 0x4fffb030
Table 'APIC' at 0x4fffb058
MADT: Found table at 0x4fffb058
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <ASUS   A7V600-X>
bios32: Found BIOS32 Service Directory header at 0xc00f2000
bios32: Entry =3D 0xf1940 (c00f1940)  Rev =3D 0  Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0x1970
pnpbios: Found PnP BIOS data at 0xc00f9cb0
pnpbios: Entry =3D f0000:9ce0  Rev =3D 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V600-X> on motherboard
acpi0: [GIANT-LOCKED]
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a):   mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D31891106)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00f1f20
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
slot 1      0   12    A   0x05  3 4 5 7 9 10 11 12
slot 1      0   12    B   0x01  3 4 5 7 9 10 11 12
slot 1      0   12    C   0x02  3 4 5 7 9 10 11 12
slot 1      0   12    D   0x03  3 4 5 7 9 10 11 12
slot 2      0   13    A   0x01  3 4 5 7 9 10 11 12
slot 2      0   13    B   0x02  3 4 5 7 9 10 11 12
slot 2      0   13    C   0x03  3 4 5 7 9 10 11 12
slot 2      0   13    D   0x05  3 4 5 7 9 10 11 12
slot 3      0   14    A   0x02  3 4 5 7 9 10 11 12
slot 3      0   14    B   0x03  3 4 5 7 9 10 11 12
slot 3      0   14    C   0x05  3 4 5 7 9 10 11 12
slot 3      0   14    D   0x01  3 4 5 7 9 10 11 12
slot 4      0   19    A   0x03  3 4 5 7 9 10 11 12
slot 4      0   19    B   0x05  3 4 5 7 9 10 11 12
slot 4      0   19    C   0x01  3 4 5 7 9 10 11 12
slot 4      0   19    D   0x02  3 4 5 7 9 10 11 12
slot 5      0   11    A   0x05  3 4 5 7 9 10 11 12
slot 5      0   11    B   0x01  3 4 5 7 9 10 11 12
slot 5      0   11    C   0x02  3 4 5 7 9 10 11 12
slot 5      0   11    D   0x03  3 4 5 7 9 10 11 12
slot 6      0   10    A   0x01  3 4 5 7 9 10 11 12
slot 6      0   10    B   0x02  3 4 5 7 9 10 11 12
slot 6      0   10    C   0x03  3 4 5 7 9 10 11 12
slot 6      0   10    D   0x05  3 4 5 7 9 10 11 12
slot 7      1    0    A   0x01  3 4 5 7 9 10 11 12
slot 7      1    0    B   0x02  3 4 5 7 9 10 11 12
embedded    0   15    A   0x06  3 4 5 7 9 10 11 12
embedded    0   15    B   0x07  3 4 5 7 9 10 11 12
embedded    0   16    A   0x06  3 4 5 7 9 10 11 12
embedded    0   16    B   0x07  3 4 5 7 9 10 11 12
embedded    0   16    C   0x08  3 4 5 7 9 10 11 12
embedded    0   16    D   0x09  3 4 5 7 9 10 11 12
embedded    0   17    C   0x08  3 4 5 7 9 10 11 12
embedded    0   17    D   0x09  3 4 5 7 9 10 11 12
embedded    0   18    A   0x06  3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 18 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 4
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 5
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=3D0x1106, dev=3D0x3189, revid=3D0x80
        bus=3D0, slot=3D0, func=3D0
        class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0006, statreg=3D0x2230, cachelnsz=3D0 (dwords)
        lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        powerspec 2  supports D0 D3  current D0
found-> vendor=3D0x1106, dev=3D0xb198, revid=3D0x00
        bus=3D0, slot=3D1, func=3D0
        class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
        cmdreg=3D0x0007, statreg=3D0x2230, cachelnsz=3D0 (dwords)
        lattimer=3D0x00 (0 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 =
(0 ns)
        map[10]: type 4, range 32, base 0000d800, size  3, enabled
        map[14]: type 4, range 32, base 0000d400, size  2, enabled
        map[18]: type 4, range 32, base 0000d000, size  3, enabled
        map[1c]: type 4, range 32, base 0000b800, size  2, enabled
        map[20]: type 4, range 32, base 0000b400, size  8, enabled
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D10, func=3D0
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D11
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 0000b000, size  3, enabled
        map[14]: type 4, range 32, base 0000a800, size  2, enabled
        map[18]: type 4, range 32, base 0000a400, size  3, enabled
        map[1c]: type 4, range 32, base 0000a000, size  2, enabled
        map[20]: type 4, range 32, base 00009800, size  8, enabled
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D10, func=3D1
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D11
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00009400, size  8, enabled
        map[14]: type 1, range 64, base ed800000, size 12, enabled
found-> vendor=3D0x9005, dev=3D0x0080, revid=3D0x02
        bus=3D0, slot=3D12, func=3D0
        class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0017, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x28 (10000 ns), =
maxlat=3D0x19 (6250 ns)
        intpin=3Da, irq=3D3
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00009000, size  3, enabled
        map[14]: type 4, range 32, base 00008800, size  2, enabled
        map[18]: type 4, range 32, base 00008400, size  3, enabled
        map[1c]: type 4, range 32, base 00008000, size  2, enabled
        map[20]: type 4, range 32, base 00007800, size  8, enabled
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D14, func=3D0
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D10
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00007400, size  3, enabled
        map[14]: type 4, range 32, base 00007000, size  2, enabled
        map[18]: type 4, range 32, base 00006800, size  3, enabled
        map[1c]: type 4, range 32, base 00006400, size  2, enabled
        map[20]: type 4, range 32, base 00006000, size  8, enabled
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D14, func=3D1
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D10
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00005800, size  3, enabled
        map[14]: type 4, range 32, base 00005400, size  2, enabled
        map[18]: type 4, range 32, base 00005000, size  3, enabled
        map[1c]: type 4, range 32, base 00004800, size  2, enabled
        map[20]: type 4, range 32, base 00004400, size  4, enabled
        map[24]: type 4, range 32, base 00004000, size  8, enabled
found-> vendor=3D0x1106, dev=3D0x3149, revid=3D0x80
        bus=3D0, slot=3D15, func=3D0
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Db, irq=3D9
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 00003800, size  4, enabled
found-> vendor=3D0x1106, dev=3D0x0571, revid=3D0x06
        bus=3D0, slot=3D15, func=3D1
        class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Da, irq=3D14
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 00003400, size  5, enabled
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D0
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Da, irq=3D5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[20]: type 4, range 32, base 00003000, size  5, enabled
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D1
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Da, irq=3D5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[20]: type 4, range 32, base 00002800, size  5, enabled
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D2
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Db, irq=3D9
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[20]: type 4, range 32, base 00002400, size  5, enabled
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D3
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Db, irq=3D9
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 1, range 32, base ed000000, size  8, enabled
found-> vendor=3D0x1106, dev=3D0x3104, revid=3D0x86
        bus=3D0, slot=3D16, func=3D4
        class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Dc, irq=3D11
        powerspec 2  supports D0 D1 D2 D3  current D0
found-> vendor=3D0x1106, dev=3D0x3227, revid=3D0x00
        bus=3D0, slot=3D17, func=3D0
        class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0087, statreg=3D0x0210, cachelnsz=3D0 (dwords)
        lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00002000, size  8, enabled
        map[14]: type 1, range 32, base ec800000, size  8, enabled
found-> vendor=3D0x1106, dev=3D0x3065, revid=3D0x78
        bus=3D0, slot=3D18, func=3D0
        class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0097, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x08 =
(2000 ns)
        intpin=3Da, irq=3D5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 4, range 32, base 00001800, size  8, port disabled
        map[14]: type 1, range 32, base ec000000, size  8, memory =
disabled
found-> vendor=3D0x10ec, dev=3D0x8169, revid=3D0x10
        bus=3D0, slot=3D19, func=3D0
        class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0014, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x20 (8000 ns), maxlat=3D0x40 =
(16000 ns)
        intpin=3Da, irq=3D255
        powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem =
0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 240M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xe000-0xdfff
pcib1:   memory decode     0xee000000-0xefdfffff
pcib1:   prefetched decode 0xeff00000-0xf7ffffff
ACPI PCI link initial configuration:
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=3D1
        map[10]: type 1, range 32, base ee000000, size 24, enabled
pcib1: device (null) requested decoded memory range =
0xee000000-0xeeffffff
        map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib1: device (null) requested decoded memory range =
0xf0000000-0xf7ffffff
found-> vendor=3D0x10de, dev=3D0x0150, revid=3D0xa3
        bus=3D1, slot=3D0, func=3D0
        class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x05 (1250 ns), =
maxlat=3D0x01 (250 ns)
        intpin=3Da, irq=3D11
        powerspec 1  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port =
0xb400-0xb4ff,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 =
irq 11 at device 10.0 on pci0
atapci0: Reserved 0x100 bytes for rid 0x20 type 4 at 0xb400
atapci0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd400
ata2: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata2-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata2: at 0xd800 on atapci0
ata2: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd000
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800
ata3: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata3-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata3-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata3: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata3: at 0xd000 on atapci0
ata3: [MPSAFE]
atapci1: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port =
0x9800-0x98ff,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xb000-0xb007 =
irq 11 at device 10.1 on pci0
atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0x9800
atapci1: [MPSAFE]
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xb000
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xa800
ata4: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata4-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata4-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata4: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata4: at 0xb000 on atapci1
ata4: [MPSAFE]
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xa400
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xa000
ata5: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata5-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata5-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata5: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata5: at 0xa400 on atapci1
ata5: [MPSAFE]
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x9400-0x94ff mem =
0xed800000-0xed800fff irq 3 at device 12.0 on pci0
ahc0: Defaulting to MEMIO on
ahc0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xed800000
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 423 instructions downloaded
ahc0: Features 0x1def6, Bugs 0x40, Flags 0x20485560
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
atapci2: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port =
0x7800-0x78ff,0x8000-0x8003,0x8400-0x8407,0x8800-0x8803,0x9000-0x9007 =
irq 10 at device 14.0 on pci0
atapci2: Reserved 0x100 bytes for rid 0x20 type 4 at 0x7800
atapci2: [MPSAFE]
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9000
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8800
ata6: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata6-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata6-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata6: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata6: at 0x9000 on atapci2
ata6: [MPSAFE]
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x8400
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x8000
ata7: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata7-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata7-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata7: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata7: at 0x8400 on atapci2
ata7: [MPSAFE]
atapci3: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port =
0x6000-0x60ff,0x6400-0x6403,0x6800-0x6807,0x7000-0x7003,0x7400-0x7407 =
irq 10 at device 14.1 on pci0
atapci3: Reserved 0x100 bytes for rid 0x20 type 4 at 0x6000
atapci3: [MPSAFE]
atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0x7400
atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0x7000
ata8: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D01
ata8-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata8-slave:  stat=3D0x01 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata8: reset tp2 stat0=3D50 stat1=3D01 devices=3D0x1<ATA_MASTER>
ata8: at 0x7400 on atapci3
ata8: [MPSAFE]
atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0x6800
atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0x6400
ata9: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata9-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata9-slave:  stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata9: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata9: at 0x6800 on atapci3
ata9: [MPSAFE]
atapci4: <VIA 6420 SATA150 controller> port =
0x4000-0x40ff,0x4400-0x440f,0x4800-0x4803,0x5000-0x5007,0x5400-0x5403,0x5=
800-0x5807 irq 9 at device 15.0 on pci0
atapci4: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4400
atapci4: [MPSAFE]
atapci4: Reserved 0x8 bytes for rid 0x10 type 4 at 0x5800
atapci4: Reserved 0x4 bytes for rid 0x14 type 4 at 0x5400
ata10: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D7f
ata10-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata10: reset tp2 stat0=3D50 stat1=3Dff devices=3D0x1<ATA_MASTER>
ata10: at 0x5800 on atapci4
ata10: [MPSAFE]
atapci4: Reserved 0x8 bytes for rid 0x18 type 4 at 0x5000
atapci4: Reserved 0x4 bytes for rid 0x1c type 4 at 0x4800
ata11: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D7f
ata11-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata11: reset tp2 stat0=3D50 stat1=3Dff devices=3D0x1<ATA_MASTER>
ata11: at 0x5000 on atapci4
ata11: [MPSAFE]
atapci5: <VIA 8237 UDMA133 controller> port =
0x3800-0x380f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 14 at device 15.1 =
on pci0
atapci5: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3800
atapci5: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci5: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci5
ata0: [MPSAFE]
atapci5: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci5: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata1-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata1: at 0x170 irq 15 on atapci5
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0x3400-0x341f irq 5 at device =
16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x3000-0x301f irq 5 at device =
16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x2800-0x281f irq 9 at device =
16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2800
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x2400-0x241f irq 9 at device =
16.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2400
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xed000000-0xed0000ff irq 11 =
at device 16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xed000000
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x2000-0x20ff mem =
0xec800000-0xec8000ff irq 5 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:0e:a6:1f:29:1e
vr0: [GIANT-LOCKED]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1800
re0: <RealTek 8110S Single-chip Gigabit Ethernet> port 0x1800-0x18ff mem =
0xec000000-0xec0000ff at device 19.0 on pci0
re0: couldn't map interrupt
device_attach: re0 attach returned 6
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on =
acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
sio0: irq maps: 0xc041 0xc051 0xc041 0xc041
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xc041 0xc041 0xc041 0xc041
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1999782321 Hz quality 800
Timecounters tick every 1.000 msec
DUMMYNET initialized (011031)
ipfw2 initialized, divert enabled, rule-based forwarding enabled, =
default to accept, logging unlimited
lo0: bpf attached
ata0-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: setting PIO4 on VIA 8237 chip
ata0-master: setting UDMA100 on VIA 8237 chip
ata0-slave: setting PIO4 on VIA 8237 chip
ata0-slave: setting UDMA100 on VIA 8237 chip
ad0: <ST3120022A/3.06> ATA-6 disk at ata0-master
ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 120031478784 end 120031511039
ad1: <ST3120022A/3.06> ATA-6 disk at ata0-slave
ad1: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
GEOM: Configure ad0s1a, start 0 length 536870912 end 536870911
GEOM: Configure ad0s1b, start 536870912 length 536870912 end 1073741823
GEOM: Configure ad0s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad0s1d, start 1073741824 length 536870912 end 1610612735
GEOM: Configure ad0s1e, start 1610612736 length 536870912 end 2147483647
GEOM: Configure ad0s1f, start 2147483648 length 10737418240 end =
12884901887
GEOM: Configure ad0s1g, start 12884901888 length 107146576896 end =
120031478783
GEOM: new disk ad1
ata1-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata1-master: setting PIO4 on VIA 8237 chip
ata1-master: setting UDMA100 on VIA 8237 chip
ata1-slave: setting PIO4 on VIA 8237 chip
ata1-slave: setting UDMA100 on VIA 8237 chip
ad2: <IC35L120AVV207-0/V24OA66A> ATA-6 disk at ata1-master
ad2: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ad3: <IC35L120AVV207-0/V24OA66A> ATA-6 disk at ata1-slave
ad3: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad3: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 120031478784 end 120031511039
GEOM: new disk ad2
GEOM: new disk ad3
GEOM: Configure ad1s1b, start 536870912 length 536870912 end 1073741823
GEOM: Configure ad1s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad1s1d, start 0 length 536870912 end 536870911
GEOM: Configure ad1s1e, start 1073741824 length 536870912 end 1610612735
GEOM: Configure ad1s1f, start 1610612736 length 536870912 end 2147483647
GEOM: Configure ad1s1g, start 2147483648 length 10737418240 end =
12884901887
GEOM: Configure ad1s1h, start 12884901888 length 107146576896 end =
120031478783
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 123518997504 end 123519029759
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad3s1, start 32256 length 123518997504 end 123519029759
GEOM: Configure ad2s1c, start 0 length 123518997504 end 123518997503
GEOM: Configure ad2s1e, start 0 length 123518997504 end 123518997503
GEOM: Configure ad3s1c, start 0 length 123518997504 end 123518997503
GEOM: Configure ad3s1e, start 0 length 123518997504 end 123518997503
ata2-slave: FAILURE - ATA_IDENTIFY no interrupt
ata2-slave: FAILURE - ATA_IDENTIFY no interrupt
ata2-master: FAILURE - ATA_IDENTIFY no interrupt
ata2-master: FAILURE - ATA_IDENTIFY no interrupt
ata3-slave: FAILURE - ATA_IDENTIFY no interrupt
ata3-slave: FAILURE - ATA_IDENTIFY no interrupt
ata3-master: FAILURE - ATA_IDENTIFY no interrupt
ata3-master: FAILURE - ATA_IDENTIFY no interrupt
ata4-slave: FAILURE - ATA_IDENTIFY no interrupt
ata4-slave: FAILURE - ATA_IDENTIFY no interrupt
ata4-master: FAILURE - ATA_IDENTIFY no interrupt
ata4-master: FAILURE - ATA_IDENTIFY no interrupt
ata5-slave: FAILURE - ATA_IDENTIFY no interrupt
ata5-slave: FAILURE - ATA_IDENTIFY no interrupt
ata5-master: FAILURE - ATA_IDENTIFY no interrupt
ata5-master: FAILURE - ATA_IDENTIFY no interrupt
ata6-slave: FAILURE - ATA_IDENTIFY no interrupt
ata6-slave: FAILURE - ATA_IDENTIFY no interrupt
ata6-master: FAILURE - ATA_IDENTIFY no interrupt
ata6-master: FAILURE - ATA_IDENTIFY no interrupt
ata7-slave: FAILURE - ATA_IDENTIFY no interrupt
ata7-slave: FAILURE - ATA_IDENTIFY no interrupt
ata7-master: FAILURE - ATA_IDENTIFY no interrupt
ata7-master: FAILURE - ATA_IDENTIFY no interrupt
ata8-master: FAILURE - ATA_IDENTIFY no interrupt
ata8-master: FAILURE - ATA_IDENTIFY no interrupt
ata9-master: FAILURE - ATA_IDENTIFY no interrupt
ata9-master: FAILURE - ATA_IDENTIFY no interrupt
ata10-master: FAILURE - ATA_IDENTIFY no interrupt
ata10-master: FAILURE - ATA_IDENTIFY no interrupt
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.

------=_NextPart_000_0000_01C48016.E936E020--




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAAq9/9/6MB40iogQmQ3%2BKkagEAAAAA>