Date: Sat, 9 Jan 1999 17:16:24 -0500 (EST) From: Kenneth Wayne Culver <culverk@wam.umd.edu> To: freebsd-current@FreeBSD.ORG Subject: ppbus stuff Message-ID: <Pine.GSO.3.95q.990109171234.25875A-100000@rac4.wam.umd.edu>
next in thread | raw e-mail | index | archive | help
I am using FreeBSD current (the kernel source is a few minutes old) and I
am using a Parallel port zip drive. The zip-drive access is working fine,
but I can't get the printer working. There is no disk in the drive when I
am trying to print. Can someone tell me if this is common behavior? My
dmesg output is below.
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #1: Sat Jan 9 16:57:47 EST 1999
culverk@localhost.x-press.net:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 199739217 Hz
CPU: AMD-K6tm w/ multimedia extensions (199.74-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x562 Stepping=2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 62828544 (61356K bytes)
Preloaded elf kernel "kernel" at 0xf0254000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=10b9 device=1531)> rev 0xb2 on pci0.0.0
chip1: <AcerLabs M1533 portable PCI-ISA bridge> rev 0xb4 on pci0.2.0
de0: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 11 on pci0.3.0
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:c0:f0:1f:21:02
vga0: <Cirrus Logic GD5446 SVGA controller> rev 0x00 on pci0.4.0
Probing for PnP devices:
CSN 1 Vendor ID: SUP2074 [0x7420b04e] Serial 0x00007916 Comp ID: @@@0000
[0x00000000]
CSN 2 Vendor ID: CTL00f0 [0xf0008c0e] Serial 0xffffffff Comp ID: PNPb02f
[0x2fb0d041]
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model IntelliMouse, device ID 3
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 84320D4>
wd0: 4120MB (8438850 sectors), 8930 cyls, 15 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <Maxtor 82160D2>
wd1: 2060MB (4219425 sectors), 4465 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <ATAPI CDROM/V130B>, removable, accel, dma, iordy
acd0: drive speed 30765 - 6187KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
npx0 on motherboard
npx0: INT 16 interface
ppc: parallel port found at 0x378
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
lppps0: <Pulse per second Timing Interface> on ppbus 0
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus 0
vpo0: EPP 1.9 mode
Waiting 2 seconds for SCSI devices to settle
da1 at vpo0 bus 0 target 6 lun 0
da1: <IOMEGA ZIP 100 D.09> Removable Direct Access SCSI-2 device
da1: Attempt to query device size failed: NOT READY, Medium not present
changing root device to wd1s1a
Thanks again for your help.
Kenneth Culver
Computer Science Major at the University of Maryland, College Park.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.3.95q.990109171234.25875A-100000>