Date: Tue, 06 Mar 2018 13:08:25 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-powerpc@FreeBSD.org Subject: [Bug 225629] powerpc64 (POWER9) segfaults randomly (e.g., building lang/gcc5) Message-ID: <bug-225629-25139-SNPK44jzkK@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-225629-25139@https.bugs.freebsd.org/bugzilla/> References: <bug-225629-25139@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D225629 Rino <rrondan@itrestauracion.com.ar> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |rrondan@itrestauracion.com. | |ar --- Comment #14 from Rino <rrondan@itrestauracion.com.ar> --- Hi, I have a powerpc g5 Mac, when I tried to compile xorg-minmal using postmast= er I have the dependency of gcc5 every time , I know it is deprecated but also I tried to install from /usr/ports/lang/gcc6 or postmaster and every time tr= y to compile gcc5 also I tried only gcc5 but fails.. How I can install gcc6 avoiding gcc5 ? root@:/usr/ports/lang/gcc6 # dmesg Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 07:28:47 UTC 2017 =20=20=20 root@releng2.nyi.freebsd.org:/usr/obj/powerpc.powerpc64/usr/src/sys/GENERIC= 64 powerpc gcc version 4.2.1 20070831 patched [FreeBSD] VT(ofwfb): resolution 1280x1024 cpu0: IBM PowerPC 970MP revision 1.1, 2000.53 MHz cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU> cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN> real memory =3D 2651049984 (2528 MB) avail memory =3D 2477019136 (2362 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0: dev=3Dff89d680 (BSP) cpu1: dev=3Dff89eb70 random: unblocking device. random: entropy device external interface kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> on nexus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 pcr0: <PPC 970 Power Control Register> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 pcr1: <PPC 970 Power Control Register> on cpu1 powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0 powermac_nvram0: bank0 generation 1839, bank1 generation 1838 unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwb= us0 unin0: Version 66 iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0 iicbus0: <OFW I2C bus> on iichb0 ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus0 ds16310: <Temp-Monitor DS1631> at addr 0x96 on iicbus0 max66900: <Temp-Monitor MAX6690> at addr 0x98 on iicbus0 max66901: <Temp-Monitor MAX6690> at addr 0x9c on iicbus0 htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0 pcib0: <IBM CPC945 PCI Express Root> mem 0xf0000000-0xf1ffffff on ofwbus0 pci0: <OFW PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem 0x92000000-0x92ffffff,0x98000000-0x9fffffff,0x91000000-0x91ffffff irq 3 at device 0.0 on pci0 vgapci0: Boot video device pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0 pcib1: 86 HT IRQs on device 7.0 pci1: <OFW PCI bus> on pcib1 pcib1: Enabling MSI window for HyperTransport slave at pci1:0:1:0 pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1 pci2: <OFW PCI bus> on pcib2 pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1 pci3: <OFW PCI bus> on pcib3 bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci3 bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus0: <MII bus> on bge0 brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:14:51:68:33:0e bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci3 bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus1: <MII bus> on bge1 brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 00:14:51:68:33:0f pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1 pci4: <OFW PCI bus> on pcib4 pcib5: <OFW PCI-PCI bridge> at device 4.0 on pci1 pci5: <OFW PCI bus> on pcib5 pcib6: <OFW PCI-PCI bridge> at device 5.0 on pci1 pci6: <OFW PCI bus> on pcib6 pcib7: <OFW PCI-PCI bridge> at device 6.0 on pci1 pci7: <OFW PCI bus> on pcib7 pcib8: <OFW PCI-PCI bridge> at device 7.0 on pci1 pci8: <OFW PCI bus> on pcib8 gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device 15.0= on pci8 gem0: invalid MAC address device_attach: gem0 attach returned 6 pcib9: <OFW PCI-PCI bridge> at device 8.0 on pci1 pci9: <OFW PCI bus> on pcib9 macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on = pci9 macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0 scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 23,17,18,24,19,20 on macio0 uart0: <z8530, channel A> on scc0 uart1: <z8530, channel B> on scc0 iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0 iicbus1: <OFW I2C bus> on iichb1 onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus1 iicbus1: <unknown card> at addr 0x24 pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 28,11,12,30,15,16 on macio0 ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at de= vice 11.0 on pci9 usbus0 on ohci0 ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at de= vice 11.1 on pci9 usbus1 on ohci1 ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 70= at device 11.2 on pci9 usbus2: EHCI version 1.0 usbus2 on ehci0 pcib10: <OFW PCI-PCI bridge> at device 9.0 on pci1 pci10: <OFW PCI bus> on pcib10 atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff irq = 10 at device 12.0 on pci10 pcib1: failed to reserve resource for pcib10 atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff). ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ata4: <ATA channel> at channel 2 on atapci0 ata5: <ATA channel> at channel 3 on atapci0 ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38,37 at device 13.0 on pci10 fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff ir= q 39 at device 14.0 on pci10 fwohci0: OHCI version 1.0 (ROM=3D0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:14:51:ff:fe:35:68:78 fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:14:51:35:68:78 fwe0: Ethernet address: 02:14:51:35:68:78 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB fwohci0: PhysicalUpperBound =3D 0x00000000 fwohci0: fwohci_intr_core: node_id=3D0x00000001, SelfID Count=3D1, CYCLEMAS= TER mode smu0: <Apple System Management Unit> on ofwbus0 iichb2: <SMU I2C controller> on smu0 iicbus2: <OFW I2C bus> on iichb2 smusat0: <SMU Satellite Sensors> at addr 0xb0 on iicbus2 iicbus2: <unknown card> at addr 0xd4 iichb3: <SMU I2C controller> on smu0 iicbus3: <OFW I2C bus> on iichb3 Timecounter "timebase" frequency 33333333 Hz quality 0 Event timer "decrementer" frequency 33333333 Hz quality 1000 Timecounters tick every 1.000 msec firewire0: 2 nodes, maxhop <=3D 1 cable IRM irm(1) (me) firewire0: bus manager 1 max66900: 2 sensors detected. max66901: 2 sensors detected. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <NEC OHCI root HUB> at usbus0 uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <NEC OHCI root HUB> at usbus1 uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: <NEC EHCI root HUB> at usbus2 uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub0: 3 ports with 3 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 5 ports with 5 removable, self powered ugen2.2: <Ralink 802.11 n WLAN> at usbus2 ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD1600JS-41MVB1 10.02E01> ATA-7 SATA 2.x device ada0: Serial Number WD-WMAP01138964 ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 152627MB (312581808 512 byte sectors) ada1 at ata3 bus 0 scbus1 target 0 lun 0 ada1: <SAMSUNG SP2504C VT100-41> ATA-7 SATA 2.x device ada1: Serial Number S09QJ1HL952442 ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada1: 238475MB (488397168 512 byte sectors) SMP: AP CPU #1 launched Trying to mount root from ufs:/dev/ada0s3 [rw]... ugen0.2: <Logitech USB Receiver> at usbus0 ukbd0 on uhub0 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 2> on usbus0 kbd1 at ukbd0 ums0 on uhub0 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 2> on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=3D2 uhid0 on uhub0 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 2> on usbus0 ugen1.2: <Primax Electronics Apple Optical USB Mouse> at usbus1 ums1 on uhub1 ums1: <Primax Electronics Apple Optical USB Mouse, class 0/0, rev 1.10/1.10, addr 2> on usbus1 ums1: 4 buttons and [XYZW] coordinates ID=3D0 bge0: link state changed to DOWN run0 on uhub2 run0: <1.0> on usbus2 run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address 7c:dd:90:04:e7:0c ieee80211_load_module: load the wlan_amrr module by hand for now. wlan0: Ethernet address: 7c:dd:90:04:e7:0c run0: firmware RT3071 ver. 0.33 loaded wlan0: link state changed to UP hw.machine: powerpc hw.model: IBM PowerPC 970MP hw.ncpu: 2 hw.byteorder: 4321 hw.physmem: 2651049984 hw.usermem: 2223316992 hw.pagesize: 4096 hw.machine_arch: powerpc64 hw.realmem: 2651049984 hw.uma_mdpages: 75462 hw.platform: powermac hw.floatingpoint: 1 hw.altivec: 1 --=20 You are receiving this mail because: You are on the CC list for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-225629-25139-SNPK44jzkK>