Date: Mon, 27 Aug 2012 13:01:02 -0600 From: Warner Losh <imp@bsdimp.com> To: George Neville-Neil <gnn@neville-neil.com> Cc: freebsd-arm@FreeBSD.org Subject: Re: Avila GW2348-4 and VLANs not working Message-ID: <68F9301B-8B03-47D3-A0AA-9F2490D3481B@bsdimp.com> In-Reply-To: <1E1B5E39-A2FC-437D-A759-BF75B680EFC5@neville-neil.com> References: <20120827174004.GD58312@funkthat.com> <1E1B5E39-A2FC-437D-A759-BF75B680EFC5@neville-neil.com>
index | next in thread | previous in thread | raw e-mail
On Aug 27, 2012, at 11:55 AM, George Neville-Neil wrote: > > On Aug 27, 2012, at 18:40 , John-Mark Gurney <jmg@funkthat.com> wrote: > >> Over the weekend, I tried to update my board to support VLANs, and when >> I did, things didn't go so well. I have 9.0-PRERELEASE installed on it, >> but the npe driver hasn't changed much since then, so I'm not sure updating >> will fix things... >> >> When I tried to run VLANs on the board, things didn't work. When I >> tcpdump'd the base interface, I got a ton of truncated-ip messages... >> Some of the packets that were suppose to be on a vlan didn't appear to >> have a vlan tag on the npe0 interface... I previously used the same >> switch w/ an older x86 box and vlans worked fine, though on a much >> older FreeBSD release... >> >> I've attached the dmesg.boot... iirc, the modifications to the source >> were some things to make pf usable, but that's about it... >> >> Any ideas what needs to be done to make vlans work? >> >> P.S. Since I only have one board, and I'm using this as a firewall >> experimenting is a little difficult. Anyone know of a another good >> ARM board that I could use (and isn't too expensive)? > > I'm a fan of the BeagleBone, which works with FreeBSD, and is about $89. > > http://beagleboard.org/buy > > Rasberry Pis are cheap but impossible to come by. Doesn't the BealgleBone have only one Ethernet? Warnerhelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?68F9301B-8B03-47D3-A0AA-9F2490D3481B>