Date: Thu, 03 Oct 2002 14:46:09 -0700 From: Mike Hogsett <hogsett@csl.sri.com> To: freebsd-questions@freebsd.org, freebsd-stable@freebsd.org Subject: Good Job, Thanks Message-ID: <200210032146.g93Lk9WZ011849@axp.csl.sri.com>
next in thread | raw e-mail | index | archive | help
I just wanted to send a note of thanks to both the FreeBSD developers and
the FreeBSD user community.
Last night I used the nfs mounted /usr/src & /usr/obj capability to build
4.7-RC on my dual 1Ghz PIII and installed it on my wimpy AMD-K6 300 this
morning. It worked flawlessly. The alternative was to wait something
like 3 weeks for the K6/300 (w/ only 64M RAM) to finish buildworld /
buildkernel.
Thanks a bunch for a wonderful operating system.
- Michael Hogsett
P.S. The AMD machine is actually a ThinkNIC (www.thinknic.com) box hacked
to accept a 2.5" HDD and an "upgraded" CPU. It is a very cute little box.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RC #1: Thu Oct 3 10:51:55 PDT 2002
hogsett@io.csl.sri.com:/usr/obj/usr/src/sys/HOGX
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 367503974 Hz
CPU: AMD-K6(tm) 3D processor (367.50-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 66584576 (65024K bytes)
avail memory = 61939712 (60488K bytes)
Preloaded elf kernel "kernel" at 0xc02df000.
K6-family MTRR support enabled (2 registers)
Using $PIR table, 5 entries at 0xc00fd1f0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 5591 ATA33 controller> port 0x4000-0x400f,0x374-0x377,0x170-0x177,
0x3f4-0x3f7,0x1f0-0x1f7 irq 14 at device 1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <OHCI USB controller> at 1.2 irq 3
sis0: <SiS 900 10/100BaseTX> port 0xe000-0xe0ff mem 0xda411000-0xda411fff irq 7
at device 11.0 on pci0
sis0: Ethernet address: 00:e0:06:e7:d6:8e
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x13f6, dev=0x0111) at 15.0 irq 11
pci0: <unknown card> (vendor=0x13f6, dev=0x0211) at 15.1 irq 10
pci0: <SiS 5597/98 SVGA controller> at 20.0
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcdfff,0xef000-0xeffff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ad1: 4887MB <IBM-DPLA-25120> [10592/15/63] at ata0-slave UDMA33
acd0: CDROM <ATAPI 24X CDROM> at ata0-master PIO4
Mounting root from ufs:/dev/ad1s1a
ohci0: <SiS 5571 USB controller> mem 0xda410000-0xda410fff irq 3 at device 1.2 o
n pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200210032146.g93Lk9WZ011849>