Date: Fri, 02 Apr 2010 00:30:04 -0700 From: Julian Elischer <julian@elischer.org> To: Randy Bush <randy@psg.com> Cc: freebsd-net <freebsd-net@FreeBSD.org>, FreeBSD Current <freebsd-current@freebsd.org> Subject: Re: bridged wlan/ether still the same Message-ID: <4BB59CFC.90101@elischer.org> In-Reply-To: <m27hoqo7b7.wl%randy@psg.com> References: <m27hoqo7b7.wl%randy@psg.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 4/1/10 8:35 PM, Randy Bush wrote: > i have a year old 8 soekris system i am about to upgrade. it is pppoe > externally, and has a bridged natted wireless/ether internal net. > > .----------------. > | | > | b --wlan0| > | r | 192.168.0.0/24 > ext iij | i --- vr1| LAN hosts, > PPP/NAT ---|vr0--- d | DHCP Clients > WAN | g --- vr2| ... > | e | > | 0 --- vr3| > | | > `----------------' ok this is similar to my setup in some ways. but the picture is wrong, remember that vr0 is not (or at least should not be) part of the bridge. the real picture is: > .----------------------------------. > | | > | b --wlan0| > | r | 192.168.0.0/24 > ext iij | i --- vr1| LAN hosts, > PPP/NAT ---|vr0[PPPoE][ppp]tun0--[R]-d | DHCP Clients > WAN | g --- vr2| ... > | e | > | 0 --- vr3| > | | > `----------------------------------' where [R] is the IP forwarding code (i.e routing not bridging) > > /etc/rc.conf > > ppp_enable=YES > ppp_mode=dedicated > ppp_nat=YES > ppp_profile=iij my profile is pppoe which is shown below It's not completely different from yours but seems to work > hostapd_enable=YES > wlans_ath0=wlan0 > create_args_wlan0="wlanmode ap mode 11g channel 11 up" > cloned_interfaces=bridge0 > ifconfig_bridge0="192.168.0.1 addm vr1 addm vr2 addm vr3 addm wlan0 addm wlan1 up" I can't help you withthe bridge part but it should be ok I think. > ifconfig_vr1=up > ifconfig_vr2=up > ifconfig_vr3=up > > /etc/hostap.conf > > interface=wlan0 > ctrl_interface=/var/run/hostapd > logger_syslog=-1 > logger_syslog_level=0 > ssid=rgnet-crypt > country_code=JP > hw_mode=g > wpa=2 > wpa_key_mgmt=WPA-PSK > wpa_passphrase=notreally > wpa_pairwise=CCMP TKIP > > /etc/ppp/ppp.conf entry > > iij: > set device PPPoE:vr0 > set MRU 1454 # NTT suggests this value > set MTU 1454 > accept CHAP > enable lqr > add default HISADDR > nat enable yes > set authname nope > set authkey peon pppoe: set device PPPoE:vr1 set redial 10.3 10000 set speed 115200 #not really intersting set timeout 0 # Never time out disable dns disable ipv6cp disable sroutes set authname heyitsme set authkey really? set login enable lqr set ifaddr X.X.X.X/32 0.0.0.0/0 255.255.255.255 0.0.0.0 add default HISADDR # Add a (sticky) default route set cd 5 > > is this still gonna work? is this a reasonable way to do this? i ask > because, if it does not, i will not have usable connectivity to get help > fixing it :) > > randy > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BB59CFC.90101>