Date: Mon, 17 Apr 2006 20:14:52 +0900 From: Norikatsu Shigemura <n-shigemura@ensure.jp> To: Vinod Kashyap <vkashyap@FreeBSD.org> Cc: "Ensure Technology Ltd. Technical Support" <tech-sup@ensure.jp>, Norikatsu Shigemura <nork@FreeBSD.org>, freebsd-hardware@freebsd.org Subject: 3ware 9500S-8 hardware failure Message-ID: <20060417201418.0D57.N-SHIGEMURA@ensure.jp>
next in thread | raw e-mail | index | archive | help
Hi Vinod.
I'll use 3ware RAID card (9500S-8) with 6 SATA HDDs as RAID5(5HDDs)
+ HotSwap(1HDD) on 6.0-RELEASE or 6.1-RELEASE (I tested 6.1BETA4).
I was installing 6.1BETA4 from CD-ROM, but I contacted a hardware
failure (6.0-RELEASE, too) like following message.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
twa0: ace card: (0x6c706572: 0x1303): PCI parity error: clearing... Re-seat/move/replace card: status reg = 0x15806a56 [MC_RDY,RESP_Q_EMPTY,PCI_PERR]
twa0: ERROR: (0x16: 0x1302): Unexpected status bit(s): status reg = 0x800000 Unexpected bits: [PCI_PERR]
:
twa0: ERROR: (0x03: 0x0212): PCI parity error: port=1
(da0:twa0:0:0:0): WRITE(10). CDB: 2a 0 4 7d fc 3f 0 0 80 0
(da0:twa0:0:0:0): CAM Status: SCSI Status Error
(da0:twa0:0:0:0): SCSI Status: Check Condition
(da0:twa0:0:0:0): HARDWARE FAILURE asc:4b,0
(da0:twa0:0:0:0): Data phase error
(da0:twa0:0:0:0): Retrying Command (per Sense Data)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Freezed after this message was printed.
I rebooted it, and boot 3ware BIOS. I saw following BIOS screen.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3ware BIOS manager (slot 7 )
Exportable Units:
Unit 0 - 5 drive 64K RAID 5 1.45TB REBUILDING (after F8)
Port 1 - ST3400832AS 372.61 GB
Port 2 - ST3400832AS 372.61 GB
Port 3 - ST3400832AS 372.61 GB
Port 4 - ST3400832AS 372.61 GB
Port 5 - ST3400832AS 372.61 GB Not in Use
Unusable Arrays:
Unit 1 - 5 drive 64K RAID 5 1.45TB Missing drives
Port 0 - ST3400832AS 372.61 GB
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
After this, I saw following message on 6.4BETA4.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3ware device driver for 9000 series storage controllers, version: 3.60.02.012
twa0: <3ware 9000 series Storage Controller> port 0x3000-0x30ff mem 0xfb260000-0xfb2600ff,0xfd800000-0xfdffffff irq 52 at device 2.0 on pci2
twa0: [GIANT-LOCKED]
twa0: WARNING: (0x04: 0x0008): Unclean shutdown detected: unit=0
twa0: WARNING: (0x04: 0x0006): Incomplete unit detected: unit=1
twa0: INFO: (0x16: 0x1300): Controller details:: Model 9500S-8, 8 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
I think that 3ware RAID card is hardware failure. Should I
change RAID card?
--
Norikatsu Shigemura <n-shigemura@ensure.jp>
Norikatsu Shigemura <nork@FreeBSD.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060417201418.0D57.N-SHIGEMURA>