Date: Tue, 29 Mar 2005 15:07:00 -0800 From: "Andrew Heyn" <aheyn@lifestylecomm.com> To: <freebsd-questions@freebsd.org> Subject: RE: ATI RAGE Mobility Message-ID: <CLELJKHKLJLNMNHGHFIDEEDLCBAA.aheyn@lifestylecomm.com> In-Reply-To: <20050329192310.69975.qmail@web81201.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I would like to state that at one point, I did get this to work. This was also a long time ago, when the patches mentioned in some of the proceeding links had to be done.. (which were and probably still are XFree86 specific) http://people.freebsd.org/~anholt/dri/news.html http://am-productions.biz/docs/fujitsu-p2110.php leads to http://dri.freedesktop.org/wiki/Building I noticed that I had to make sure I rebuilt mach64.ko and some of the X libraries regarding dri if I was to upgrade the kernel. Note this from the Wiki: "The DRM is shipped with the kernel, so you shouldn't need to build it. If you choose to, simply run "make && make install" from the drm/bsd directory. " This is contrary to the suggestion to install "ports/graphics/drm." The building referred to above is within the X tree. The history to the mach64 dri support may be of interest: http://people.freebsd.org/~anholt/dri/news.html (already gave this link) You can always (if you are patient) contact anholt who is rather busy on freenode.net in #dri. Beware, I asked a question there, and fixed it myself before I got an answer. Hope this helps more than my other post. It still sucked pretty bad once I got DRI working with my mach64, but... It was better... Thanks! Andrew -----Original Message----- From: owner-freebsd-questions@freebsd.org [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Mark Busby Sent: Tuesday, March 29, 2005 11:23 AM To: freebsd-questions@freebsd.org Subject: re: ATI RAGE Mobility On Monday 28 March 2005 20:25, Edwin Mons wrote: > On Mon, 28 Mar 2005 20:20:50 +0200, Edwin Mons wrote: > > I'm trying to enable DRI on my IBM ThinkPad A20m, which has an ATI > > Rage Mobility P/M AGP 2x rev 100 GPU onboard. I succesfully > > installed the mach64 DRM module, which shows the following lines in> > my dmesg: > > > > drm0: <Rage Mobility P/M AGP 2X> port 0x2000-0x20ff mem > > 0xf4200000-0xf4200fff,0xf5000000-0xf5ffffff irq 11 at device 0.0 on > > pci1 > > info: [drm] AGP at 0xf8000000 64MB > > info: [drm] Initialized mach64 1.0.0 20020904 on minor 0 > > > > However, when I start X.org 6.8.2, it doesn't show anything about > > DRM in the logfiles (attached). glxinfo reports it doesn't use > > Direct Rendering as well. > > > > Attached is my xorg.conf, as well. > > > > My questions: 1) does anybody know if it is possible to have DRI on > > this configuration at all, and 2) how does one get it to work? from kernel LINT file # DRM options: # mgadrm: AGP Matrox G200, G400, G450, G550 # tdfxdrm: 3dfx Voodoo 3/4/5 and Banshee # r128drm: ATI Rage 128 # radeondrm: ATI Radeon up to 9000/9100 # DRM_DEBUG: include debug printfs, very slow # # mga requires AGP in the kernel, and it is recommended # for AGP r128 and radeon cards. device mgadrm device "r128drm" device radeondrm device tdfxdrm options DRM_DEBUG You may need to add the "device mgadrm" Hope it helps. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CLELJKHKLJLNMNHGHFIDEEDLCBAA.aheyn>