Date: Mon, 19 Jan 2009 21:43:48 +0000 (UTC) From: Marius Strobl <marius@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-6@freebsd.org Subject: svn commit: r187449 - stable/6/share/man/man4 Message-ID: <200901192143.n0JLhmIq022307@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: marius Date: Mon Jan 19 21:43:48 2009 New Revision: 187449 URL: http://svn.freebsd.org/changeset/base/187449 Log: - MFC: 154328 Add the HP NC7771 adapter to the list of known products. - MFC: 162584 Add documentation on the new bge tunable. Also put the tunable docs into a separate section. - MFC: 162825 Spelling - MFC: 169881 (bge.4 part) Remove BCM5704S specific tunable (hw.bge.fake_autoneg) and auto-detect the condition. - MFC: 174903 Mention support for the 5722 driver in bge.4 as well. - MFC: 187315 Sync the description of jumbo frame support with reality as of r187310; it's also supported with BCM5702 (matched by BGE_ASICREV_BCM5703) but bge(4) currently doesn't with neither BCM5714 nor BCM5780. Modified: stable/6/share/man/man4/ (props changed) stable/6/share/man/man4/bge.4 Modified: stable/6/share/man/man4/bge.4 ============================================================================== --- stable/6/share/man/man4/bge.4 Mon Jan 19 21:42:54 2009 (r187448) +++ stable/6/share/man/man4/bge.4 Mon Jan 19 21:43:48 2009 (r187449) @@ -31,12 +31,12 @@ .\" .\" $FreeBSD$ .\" -.Dd January 30, 2007 +.Dd January 15, 2009 .Dt BGE 4 .Os .Sh NAME .Nm bge -.Nd "Broadcom BCM570x/5714/5721/5750/5751/5752/5789 PCI Gigabit Ethernet adapter driver" +.Nd "Broadcom BCM570x/5714/5721/5722/5750/5751/5752/5789 PCI Gigabit Ethernet adapter driver" .Sh SYNOPSIS To compile this driver into the kernel, place the following lines in your @@ -56,7 +56,7 @@ if_bge_load="YES" The .Nm driver provides support for various NICs based on the Broadcom BCM570x, -5714, 5721, 5750, 5751, 5752 and 5789 families of Gigabit Ethernet +5714, 5721, 5722, 5750, 5751, 5752 and 5789 families of Gigabit Ethernet controller chips. .Pp All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5 @@ -82,7 +82,7 @@ copper gigabit transceivers, which support autonegotiation of 10, 100 and 1000Mbps modes in full or half duplex. .Pp -The BCM5700, BCM5701, BCM5703, BCM5704, BCM5714 and BCM5780 also support +The BCM5700, BCM5701, BCM5702, BCM5703 and BCM5704 also support jumbo frames, which can be configured via the interface MTU setting. Selecting an MTU larger than 1500 bytes with the @@ -194,6 +194,8 @@ HP ProLiant NC7760 embedded Gigabit NIC .It HP ProLiant NC7770 PCI-X Gigabit NIC (10/100/1000baseTX) .It +HP ProLiant NC7771 PCI-X Gigabit NIC (10/100/1000baseTX) +.It HP ProLiant NC7781 embedded PCI-X Gigabit NIC (10/100/1000baseTX) .It Netgear GA302T (10/100/1000baseTX) @@ -202,6 +204,17 @@ SysKonnect SK-9D21 (10/100/1000baseTX) .It SysKonnect SK-9D41 (1000baseSX) .El +.Sh LOADER TUNABLES +The following tunable can be set at the +.Xr loader 8 +prompt before booting the kernel, or stored in +.Xr loader.conf 5 . +.Bl -tag -width indent +.It Va hw.bge.allow_asf +Allow the ASF feature for cooperating with IPMI. +Can cause system lockup problems on a small number of systems. +Disabled by default. +.El .Sh DIAGNOSTICS .Bl -diag .It "bge%d: couldn't map memory"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200901192143.n0JLhmIq022307>