Date: Tue, 15 Aug 2006 13:20:34 +0300 From: "Android Andrew [:]" <android@oberon.pfi.lt> To: freebsd-stable@freebsd.org Subject: FreeBSD 6.1-STABLE: Unexplained power off Message-ID: <44E19FF2.9080709@oberon.pfi.lt>
next in thread | raw e-mail | index | archive | help
Hi everyone!
My system (FreeBSD callisto 6.1-STABLE FreeBSD 6.1-STABLE #4: Mon Aug 14
13:32:00 EEST 2006 root@callisto:/usr/obj/usr/src/sys/callisto i386)
powers down during compilation - doesn't matter it is any port (kde,
openoffice) or "make -j4 buildworld". Computer powers off without any
message (screen, or /var/log/messages, or core-file). The same hardware
worked without any problems during the last six months under FreeBSD
6.0-STABLE amd64.
To turn computer on I need to press and hold for several seconds "Power"
button, then I have to release the button, and press it again.
At first I thought that problem could be in CPU, power supply, mobo
chips overheating, but temperature sensors reported everything is OK. To
be on the safe side I installed additional radiators and coolers. But it
doesn't solve the problem.
I've noticed that system is unstable under high disk io load during
compilation.
Could anyone give me an idea how to diagnose the problem in this case?
Thanks in Advance!
My hardware is:
Asus P5LD2 with 2 Gb Ram
dmesg:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #4: Mon Aug 14 13:32:00 EEST 2006
root@callisto:/usr/obj/usr/src/sys/callisto
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3010.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 2147090432 (2047 MB)
avail memory = 2092134400 (1995 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ichwd module loaded
acpi0: <A M I OEMXSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci4: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 6600> mem
0xd4000000-0xd7ffffff,0xd8000000-0xdfffffff,0xd3000000-0xd3ffffff irq 16
at device 0.0 on pci4
nvidia0: [GIANT-LOCKED]
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib3
myk0: <Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.2.3> port
0xc800-0xc8ff mem 0xd2efc000-0xd2efffff irq 19 at device 0.0 on pci2
myk0: Ethernet address: 00:13:d4:d0:31:e5
uhci0: <UHCI (generic) USB controller> port 0x8000-0x801f irq 20 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x8400-0x841f irq 17 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x8800-0x881f irq 18 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x9000-0x901f irq 19 at
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xd2dff800-0xd2dffbff irq 20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub4: device problem (IOERROR), disabling port 7
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port
0xa800-0xa807,0xa400-0xa403,0xa000-0xa007,0x9800-0x9803,0x9400-0x940f
mem 0xd2dffc00-0xd2dfffff irq 23 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
ichsmb0: <SMBus controller> port 0x400-0x41f irq 23 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq
3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ichwd0: <Intel ICH5 watchdog timer> on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
ukbd0: Key Tronic Keytronic USB Keyboard, rev 1.10/1.02, addr 2, iclass 3/1
kbd2 at ukbd0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 3, iclass 3/1
ums0: 4 buttons and Z dir.
Timecounters tick every 1.000 msec
WARNING: apm_saver module requires apm enabled
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
enabled, default to deny, logging limited to 100 packets/entry by default
acd0: DVDR <PIONEER DVD-RW DVR-111D/1.19> at ata0-master UDMA66
ad4: 114473MB <Seagate ST3120813AS 2AAA> at ata2-master SATA300
ad6: 114473MB <Seagate ST3120813AS 2AAA> at ata3-master SATA300
ar0: 228942MB <Intel MatrixRAID RAID0 (stripe 128 KB)> status: READY
ar0: disk0 READY using ad4 at ata2-master
ar0: disk1 READY using ad6 at ata3-master
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PIONEER DVD-RW DVR-111D 1.19> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ar0s1a
WARNING: /var was not properly dismounted
myk0: link up
oss: Out of mixer extensions for device 0
kernel:
machine i386
cpu I686_CPU
options CPU_FASTER_5X86_FPU
options CPU_DISABLE_SSE
ident callisto
maxusers 256
options SCHED_ULE # ULE scheduler
#options SCHED_4BSD # 4BSD scheduler
options SMP
options PREEMPTION # Enable kernel threadpreemption
options IPI_PREEMPTION
options MPTABLE_FORCE_HTT # Enable HTT CPUs with the MP Table
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big
directories
options MD_ROOT # MD is a potential root device
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires
PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP
THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_LINUX # Compatible with i386 linux
binaries
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options FB_INSTALL_CDEV
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options LINPROCFS # Cannot be a module yet.
options LINSYSFS
device apic # I/O apic
device acpi
device pci
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapicam
options ATA_STATIC_ID # Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device kbdmux # keyboard multiplexer
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
#device agp # support several AGP chipsets
device apm
device apm_saver # Requires APM
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device miibus # MII bus support
device sk # SysKonnect SK-984x & SK-982x gigabit
device vr # VIA Rhine, Rhine II
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
device ichwd
device ichsmb
options ENABLE_ALART
options SC_DISABLE_REBOOT
device smb
device smbus
device ppp
options PPP_BSDCOMP
options PPP_DEFLATE
options PPP_FILTER
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=100
# options IPFIREWALL_DEFAULT_TO_ACCEPT
options IPFIREWALL_FORWARD
options IPFIREWALL_FORWARD_EXTENDED
options IPDIVERT
options IPSTEALTH
options TCP_DROP_SYNFIN
options DUMMYNET
options BRIDGE
device speaker
options VESA
device npx
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44E19FF2.9080709>