Date: Sun, 30 Jul 2000 17:48:13 -0700 (PDT) From: Gary Kline <kline@tao.thought.org> To: freebsd-questions@FreeBSD.ORG (FreeBSD Mailing List) Subject: can't add 2nd SCSI drive... Message-ID: <200007310048.RAA98058@tao.thought.org>
next in thread | raw e-mail | index | archive | help
Can anybody give me a clue as to what is going on with my new
(4-month-old) 4.0 FBSD system... ? I added a 6.5G SCA SCSI
to an existant platform. I bought a 2930 adaptor that recognizes
both my older SCSI drive and the newer one. Low-level format
worked. But when I use /stand/sysinstall to add the slices, it
fails with the err:
No disks found! Please verify that your disk controller is
being probed at boot time. ...
The output of dmesg from this 2nd FBSD platform is::
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #3: Sat May 13 19:48:35 PDT 2000
root@sage:/usr/src/sys/compile/SAGE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (200.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 61661184 (60216K bytes)
Preloaded elf kernel "kernel" at 0xc0393000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x5f00-0x5f0f at device 7.3 on pci0
pci0: <S3 ViRGE graphics accelerator> at 17.0 irq 10
ahc0: <Adaptec 2930CU SCSI adapter> port 0x6400-0x64ff mem 0xe4000000-0xe4000fff irq 9 at device 18.0 on pci0
ahc0: aic7859 Single Channel A, SCSI Id=7, 3/255 SCBs
ed0: <NE2000 PCI Ethernet (ProLAN)> port 0x6900-0x691f irq 12 at device 19.0 on pci0
ed0: supplying EUI64: 00:20:78:ff:fe:14:07:68
ed0: address 00:20:78:14:07:68, type NE2000 (16 bit)
isa0: too many dependant configs (8)
isa0: unexpected small tag 14
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
adv1: Invalid baseport of 0x220 specified. Neerest valid baseport is 0x230. Failing probe.
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.16> on sbc0
adv1: Invalid baseport of 0x200 specified. Neerest valid baseport is 0x210. Failing probe.
unknown0: <Game> at port 0x200-0x207 on isa0
adv1: Invalid baseport of 0x620 specified. Neerest valid baseport is 0x330. Failing probe.
unknown1: <WaveTable> at port 0x620-0x623 on isa0
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <ARCHIVE VIPER 150 21247 -005> Removable Sequential Access SCSI-CCS device
sa0: 3.300MB/s transfers
da1 at ahc0 bus 0 target 2 lun 0
da1: <SEAGATE ST36530WC 1281> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da1: 6208MB (12715920 512 byte sectors: 255H 63S/T 791C)
da0 at ahc0 bus 0 target 1 lun 0
da0: <QUANTUM FIREBALL ST4.3S 0F0C> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4136MB (8471232 512 byte sectors: 255H 63S/T 527C)
Mounting root from ufs:/dev/da0s1a
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <NEC CD-ROM DRIVE:463 1.05> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ed0: starting DAD for fe80:0001::0220:78ff:fe14:0768
ed0: DAD complete for fe80:0001::0220:78ff:fe14:0768 - no duplicates found
Anything here that I'm missing? ...Since the "No disks found" err
pops up when I try an Upgrade or any of the Install options, it's
obvious that at least one drive is recognized.
Clues please!
gary
--
Gary D. Kline kline@tao.thought.org Public service Unix
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200007310048.RAA98058>