Date: Sat, 19 Sep 1998 21:46:20 +0200 (CEST) From: Stephane Legrand <Stephane.Legrand@wanadoo.fr> To: current@FreeBSD.ORG Cc: gibbs@narnia.plutotech.com Subject: Problem corrected (was CAM - fatal error, failed to attach to device) Message-ID: <199809191946.VAA00613@sequoia.mondomaineamoi.megalo> In-Reply-To: <199809161718.TAA00432@sequoia.mondomaineamoi.megalo> References: <199809161718.TAA00432@sequoia.mondomaineamoi.megalo>
next in thread | previous in thread | raw e-mail | index | archive | help
Stephane Legrand writes: With today -current, the problem has been solved. The computer now boots and everything seems work fine. Thanks a lot to the CAM team. > > I have the following error with CAM : > > ... > changing root device to da0s1a > cam_debug: xpt_schedule_dev > cam_debug: Inserting onto queue > cam_debug: xpt_run_dev_sendq > cam_debug: running device 0xf092dd00 > cam_debug: xpt_schedule_dev > cam_debug: Inserting onto queue > cam_debug: xpt_run_dev_sendq > cam_debug: running device 0xf092dd00 > da0: fatal error, failed to attach to device > (da0:ncr0:0:6:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:ncr0:0:6:0): error code 67 > cam_debug: xpt_release_ccb > > The boot stops but i can use CTRL+ALT+DEL to reboot. > My config is the following : > > ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 12 on pci0.11.0 > scbus0 at ncr0 bus 0 > sd0 at scbus0 target 6 lun 0 > sd0: <QUANTUM FIREBALL_TM3200S 300X> type 0 fixed SCSI 2 > sd0: Direct-Access > sd0: 20.0 MB/s (50 ns, offset 15) > 3067MB (6281856 512 byte sectors) > ncr1: <ncr 53c810a fast10 scsi> rev 0x12 int a irq 11 on pci0.12.0 > scbus1 at ncr1 bus 0 > st0 at scbus1 target 0 lun 0 > st0: <SONY SDT-7000 0195> type 1 removable SCSI 2 > st0: Sequential-Access > st0: 10.0 MB/s (100 ns, offset 8) > density code 0x13, drive empty > cd0 at scbus1 target 4 lun 0 > cd0: <PIONEER CD-ROM DR-U03S 1.01> type 5 removable SCSI 2 > cd0: CD-ROM > cd0: asynchronous. > can't get the size > -- Stephane.Legrand@wanadoo.fr | systeme d'exploitation FreeBSD http://perso.wanadoo.fr/stephane.legrand/ | http://www.freebsd.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199809191946.VAA00613>