Date: Wed, 14 Nov 2001 10:04:19 -0500 From: <FJU@Fritzilldo.com> To: <Questions@FreeBSD.org> Subject: My Kernel Config File Message-ID: <002f01c16d1d$a3247840$0301a8c0@fritzilldo>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_002C_01C16CF3.BA007750 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hello, I read in my book that if make fails when trying to compile a new kernel that I should send the kernel config file to you to look over. I tried to make it and it gave me this error: Makefile:28: *** missing seperator. Stop. I hope you can help me. (my book is The Complete FreeBSD (3rd Edition)) Thanks. ------=_NextPart_000_002C_01C16CF3.BA007750 Content-Type: application/octet-stream; name="FRITZILLDO" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="FRITZILLDO" #=0A= # FRITZILLDO -- My recovery Kernel config file.=0A= #=0A= # $FreeBSD: src/sys/i386/conf/FRITZILLDO,v 1.246.2.8 2000/07/20 02:51:02 = msmith Exp $=0A= =0A= machine i386=0A= cpu I386_CPU=0A= cpu I486_CPU=0A= cpu I586_CPU=0A= cpu I686_CPU=0A= ident FRITZILLDO=0A= maxusers 32=0A= =0A= makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols=0A= =0A= options MATH_EMULATE #Support for x87 emulation=0A= options INET #InterNETworking=0A= options INET6 #IPv6 communications protocols=0A= options FFS #Berkeley Fast Filesystem=0A= options FFS_ROOT #FFS usable as root device [keep this!]=0A= options SOFTUPDATES #Enable FFS soft updates support=0A= options MFS #Memory Filesystem=0A= options MD_ROOT #MD is a potential root device=0A= options NFS #Network Filesystem=0A= options NFS_ROOT #NFS usable as root device, NFS required=0A= options MSDOSFS #MSDOS Filesystem=0A= options CD9660 #ISO 9660 Filesystem=0A= options CD9660_ROOT #CD-ROM usable as root, CD9660 required=0A= options PROCFS #Process filesystem=0A= options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]=0A= options SCSI_DELAY=3D15000 #Delay (in ms) before probing SCSI=0A= options UCONSOLE #Allow users to grab the console=0A= options USERCONFIG #boot -c editor=0A= options VISUAL_USERCONFIG #visual boot -c editor=0A= options KTRACE #ktrace(1) support=0A= options SYSVSHM #SYSV-style shared memory=0A= options SYSVMSG #SYSV-style message queues=0A= options SYSVSEM #SYSV-style semaphores=0A= options P1003_1B #Posix P1003_1B real-time extensions=0A= options _KPOSIX_PRIORITY_SCHEDULING=0A= options ICMP_BANDLIM #Rate limit bad replies=0A= options KBD_INSTALL_CDEV # install a CDEV entry in /dev=0A= =0A= # REVISIONS TO MAKE FRITZILLDO=0A= =0A= options QUOTA #Enable disk quotas.=0A= options IPFIREWALL #Enable firewall.=0A= options IPFIREWALL_VERBOSE #Logging information.=0A= options IPFIREWALL_FORWARD #Transparent Proxy support.=0A= options IPFIREWALL_VERBOSE_LIMIT=3D100 #Limit verbosity.=0A= options IPFIREWALL_DEFAULT_TO_ACCEPT #Accept everything.=0A= options IPDIVERT #Diverting.=0A= options IPFILTER #IP Filtering.=0A= options IPFILTER_LOG #IP Filter Logging.=0A= options BRIDGE #NIC Bridging.=0A= options DUMMYNET #Used with NIC Bridging.=0A= =0A= =0A= =0A= # To make an SMP kernel, the next two are needed=0A= #options SMP # Symmetric MultiProcessor Kernel=0A= #options APIC_IO # Symmetric (APIC) I/O=0A= # Optionally these may need tweaked, (defaults shown):=0A= #options NCPU=3D2 # number of CPUs=0A= #options NBUS=3D4 # number of busses=0A= #options NAPIC=3D1 # number of IO APICs=0A= #options NINTR=3D24 # number of INTs=0A= =0A= device isa=0A= device eisa=0A= device pci=0A= =0A= # Floppy drives=0A= device fdc0 at isa? port IO_FD1 irq 6 drq 2=0A= device fd0 at fdc0 drive 0=0A= device fd1 at fdc0 drive 1=0A= =0A= # ATA and ATAPI devices=0A= device ata0 at isa? port IO_WD1 irq 14=0A= device ata1 at isa? port IO_WD2 irq 15=0A= device ata=0A= device atadisk # ATA disk drives=0A= device atapicd # ATAPI CDROM drives=0A= device atapifd # ATAPI floppy drives=0A= device atapist # ATAPI tape drives=0A= options ATA_STATIC_ID #Static device numbering=0A= options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices=0A= =0A= # SCSI Controllers=0A= device ahb # EISA AHA1742 family=0A= device ahc # AHA2940 and onboard AIC7xxx devices=0A= device amd # AMD 53C974 (Teckram DC-390(T))=0A= device dpt # DPT Smartcache - See LINT for options!=0A= device isp # Qlogic family=0A= device ncr # NCR/Symbios Logic=0A= device sym # NCR/Symbios Logic (newer chipsets)=0A= options SYM_SETUP_LP_PROBE_MAP=3D0x40=0A= # Allow ncr to attach legacy NCR devices when =0A= # both sym and ncr are configured=0A= =0A= device adv0 at isa?=0A= device adw=0A= device bt0 at isa?=0A= device aha0 at isa?=0A= device aic0 at isa?=0A= =0A= # SCSI peripherals=0A= device scbus # SCSI bus (required) ZIP DRIVE CHANGES (VPO BELOW)=0A= device da # Direct Access (disks) ZIP DRIVE CHANGES (VPO BELOW)=0A= device sa # Sequential Access (tape etc)=0A= device cd # CD=0A= device pass # Passthrough device (direct SCSI access)=0A= =0A= # RAID controllers=0A= device ida # Compaq Smart RAID=0A= device amr # AMI MegaRAID=0A= device mlx # Mylex DAC960 family=0A= device twe # 3ware Escalade=0A= =0A= # atkbdc0 controls both the keyboard and the PS/2 mouse=0A= device atkbdc0 at isa? port IO_KBD=0A= device atkbd0 at atkbdc? irq 1 flags 0x1=0A= device psm0 at atkbdc? irq 12=0A= =0A= device vga0 at isa?=0A= =0A= # splash screen/screen saver=0A= pseudo-device splash=0A= =0A= # syscons is the default console driver, resembling an SCO console=0A= device sc0 at isa? flags 0x100=0A= =0A= # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver=0A= #device vt0 at isa?=0A= #options XSERVER # support for X server on a vt console=0A= #options FAT_CURSOR # start with block cursor=0A= # If you have a ThinkPAD, uncomment this along with the rest of the PCVT = lines=0A= #options PCVT_SCANSET=3D2 # IBM keyboards are non-std=0A= =0A= # Floating point support - do not disable.=0A= device npx0 at nexus? port IO_NPX irq 13=0A= =0A= # Power management support (see LINT for more options)=0A= device apm0 at nexus? disable flags 0x20 # Advanced Power Management=0A= =0A= # PCCARD (PCMCIA) support=0A= device card=0A= device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000=0A= device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable=0A= =0A= # Serial (COM) ports=0A= device sio0 at isa? port IO_COM1 flags 0x10 irq 4=0A= device sio1 at isa? port IO_COM2 irq 3=0A= device sio2 at isa? disable port IO_COM3 irq 5=0A= device sio3 at isa? disable port IO_COM4 irq 9=0A= =0A= # Parallel port=0A= device ppc0 at isa? irq 7=0A= device ppbus # Parallel port bus (required)=0A= device lpt # Printer=0A= device plip # TCP/IP over parallel=0A= device ppi # Parallel port interface device=0A= device vpo # Requires scbus and da=0A= =0A= =0A= # PCI Ethernet NICs.=0A= device de # DEC/Intel DC21x4x (``Tulip'')=0A= device fxp # Intel EtherExpress PRO/100B (82557, 82558)=0A= device tx # SMC 9432TX (83c170 ``EPIC'')=0A= device vx # 3Com 3c590, 3c595 (``Vortex'')=0A= device wx # Intel Gigabit Ethernet Card (``Wiseman'')=0A= =0A= # PCI Ethernet NICs that use the common MII bus controller code.=0A= device miibus # MII bus support=0A= device dc # DEC/Intel 21143 and various workalikes=0A= device rl # RealTek 8129/8139=0A= device sf # Adaptec AIC-6915 (``Starfire'')=0A= device sis # Silicon Integrated Systems SiS 900/SiS 7016=0A= device ste # Sundance ST201 (D-Link DFE-550TX)=0A= device tl # Texas Instruments ThunderLAN=0A= device vr # VIA Rhine, Rhine II=0A= device wb # Winbond W89C840F=0A= device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')=0A= =0A= # ISA Ethernet NICs.=0A= device ed0 at isa? port 0x280 irq 10 iomem 0xd8000=0A= device ex=0A= device ep=0A= # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really=0A= # exists only as a PCMCIA device, so there is no ISA attatement needed=0A= # and resources will always be dynamically assigned by the pccard code.=0A= device wi=0A= # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below = will=0A= # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP=0A= # mode (the factory default). If you set the switches on your ISA=0A= # card for a manually chosen I/O address and IRQ, you must specify=0A= # those paremeters here.=0A= device an=0A= # Xircom Ethernet=0A= device xe=0A= # The probe order of these is presently determined by = i386/isa/isa_compat.c.=0A= device ie0 at isa? port 0x300 irq 10 iomem 0xd0000=0A= device fe0 at isa? port 0x300=0A= device le0 at isa? port 0x300 irq 5 iomem 0xd0000=0A= device lnc0 at isa? port 0x280 irq 10 drq 0=0A= device cs0 at isa? port 0x300=0A= device sn0 at isa? port 0x300 irq 10=0A= =0A= # Pseudo devices - the number indicates how many units to allocated.=0A= pseudo-device loop # Network loopback=0A= pseudo-device ether # Ethernet support=0A= pseudo-device sl 1 # Kernel SLIP=0A= pseudo-device ppp 1 # Kernel PPP=0A= pseudo-device tun # Packet tunnel.=0A= pseudo-device pty # Pseudo-ttys (telnet etc)=0A= pseudo-device md # Memory "disks"=0A= pseudo-device gif 4 # IPv6 and IPv4 tunneling=0A= pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)=0A= =0A= # The `bpf' pseudo-device enables the Berkeley Packet Filter.=0A= # Be aware of the administrative consequences of enabling this!=0A= pseudo-device bpf #Berkeley packet filter=0A= =0A= # USB support=0A= device uhci # UHCI PCI->USB interface=0A= device ohci # OHCI PCI->USB interface=0A= device usb # USB Bus (required)=0A= device ugen # Generic=0A= device uhid # "Human Interface Devices"=0A= device ukbd # Keyboard=0A= device ulpt # Printer=0A= device umass # Disks/Mass storage - Requires scbus and da=0A= device ums # Mouse=0A= # USB Ethernet, requires mii=0A= device aue # ADMtek USB ethernet=0A= device cue # CATC USB ethernet=0A= device kue # Kawasaki LSI USB ethernet=0A= =0A= ------=_NextPart_000_002C_01C16CF3.BA007750-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002f01c16d1d$a3247840$0301a8c0>