Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 13 Oct 1997 16:25:53 +0300
From:      Antti-Pekka Liedes <apl@mail.cs.hut.fi>
To:        luigi@iet.unipi.it, current@freebsd.org
Subject:   pcm fails to attach in -current
Message-ID:  <19971013162553.43739@hutcs.cs.hut.fi>

next in thread | raw e-mail | index | archive | help

--QoSWH+UP9D9v3lNM
Content-Type: text/plain; charset=us-ascii


The pcm-driver in -current fails to attach to my Soundblaster 32.  The last
kernel where the pcm-driver works was build on Sep 18th, I haven't changed
my kernel config since, but in all later kernels the pcm-driver hasn't
worked.

-- 
Antti-Pekka Liedes  *        apl@IRC            *  In two hells there's
JMT 6 B 406         *       apl@iki.fi          *  one hell too many
02150  ESPOO        * +358 -  9 - 468 3121      *     - Lucifer
FINLAND             * +358 - 40 - 5873 593      *        (in God's Army)

--QoSWH+UP9D9v3lNM
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=attach

Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Thu Sep 18 12:47:15 EEST 1997
    apl@apocalypse.tky.hut.fi:/var/src/sys/compile/APOCALYPSE-SMP
CPU: Pentium (586-class CPU)
  Origin = "GenuineIntel"  Id = 0x544  Stepping=4
  Features=0x8003bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,MMX>
real memory  = 100663296 (98304K bytes)
avail memory = 95522816 (93284K bytes)
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00030010, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00030010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
DEVFS: ready for devices
Probing for devices on PCI bus 0:
chip0: <Intel 82439> rev 0x03 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
de0: <Digital 21140A Fast Ethernet> rev 0x20 int a irq 19 on pci0.17.0
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0
de0: address 00:00:c0:30:46:f9
chip2: <DEC 21050 PCI-PCI bridge> rev 0x02 on pci0.18.0
vga0: <VGA-compatible display device> rev 0x01 int a irq 16 on pci0.20.0
Probing for devices on PCI bus 1:
ahc0: <Adaptec 3940 Ultra SCSI host adapter> rev 0x00 int a irq 18 on pci1.4.0
ahc0: aic7880 Channel A, SCSI Id=7, 16/255 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
ahc0: target 0 Tagged Queuing Device
sd0 at scbus0 target 0 lun 0
sd0: <IBM DSAS-3540 S47W> type 0 fixed SCSI 2
sd0: Direct-Access 522MB (1070496 512 byte sectors)
ahc0: target 2 Tagged Queuing Device
sd1 at scbus0 target 2 lun 0
sd1: <QUANTUM FIREBALL_TM3200S 300X> type 0 fixed SCSI 2
sd1: Direct-Access 3067MB (6281856 512 byte sectors)
ahc1: <Adaptec 3940 Ultra SCSI host adapter> rev 0x00 int a irq 19 on pci1.5.0
ahc1: aic7880 Channel B, SCSI Id=7, 16/255 SCBs
ahc1: waiting for scsi devices to settle
scbus1 at ahc1 bus 0
ahc1: target 3 Tagged Queuing Device
sd2 at scbus1 target 3 lun 0
sd2: <QUANTUM FIREBALL_TM3200S 300X> type 0 fixed SCSI 2
sd2: Direct-Access 3067MB (6281856 512 byte sectors)
ahc1: target 4 Tagged Queuing Device
sd3 at scbus1 target 4 lun 0
sd3: <QUANTUM EMPIRE_2100S 1022> type 0 fixed SCSI 2
sd3: Direct-Access 2006MB (4108600 512 byte sectors)
Probing for PnP devices:
CSN 1 Vendor ID: CTL0044 [0x44008c0e] Serial 0x10005b38
pcm1 (SB16pnp <SB AWE64 PnP> sn 0x10005b38) at 0x220 irq 5 drq 1 flags 0x15 id 13
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
pcm0 at 0xffff irq 5 drq 1 mem 0x0 flags 0x0 en 1 confl 0
mss_probe: no address supplied, try default 0x530
mss_detect error, busy still set (0xff)
sb_probe: no address supplied, try defaults (0x220,0x240)
device at 0x220 already attached as unit 1
pcm0 not found
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <ALPS ELECTRIC CO.,LTD. DC544C/SW03B>, removable, iordy
atapi0.0: unknown phase
wdc1 not found at 0x170
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
DEVFS: ready to run
APIC_IO: routing 8254 via 8259 on pin 0
ccd0-3: Concatenated disk drivers
SMP: AP CPU #1 Launched!
de0: enabling Full Duplex 100baseTX port
mountmsdosfs(): Warning: root directory is not a multiple of the clustersize in length

--QoSWH+UP9D9v3lNM
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=no_attach

Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Sun Oct 12 21:37:28 EEST 1997
    apl@apocalypse.tky.hut.fi:/var/src/sys/compile/APOCALYPSE-SMP
CPU: Pentium (586-class CPU)
  Origin = "GenuineIntel"  Id = 0x544  Stepping=4
  Features=0x8003bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,MMX>
real memory  = 100663296 (98304K bytes)
avail memory = 95453184 (93216K bytes)
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00030010, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00030010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
DEVFS: ready for devices
Probing for devices on PCI bus 0:
chip0: <Intel 82439> rev 0x03 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
de0: <Digital 21140A Fast Ethernet> rev 0x20 int a irq 19 on pci0.17.0
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0
de0: address 00:00:c0:30:46:f9
chip2: <DEC 21050 PCI-PCI bridge> rev 0x02 on pci0.18.0
vga0: <VGA-compatible display device> rev 0x01 int a irq 16 on pci0.20.0
Probing for devices on PCI bus 1:
ahc0: <Adaptec 3940 Ultra SCSI host adapter> rev 0x00 int a irq 18 on pci1.4.0
ahc0: aic7880 Channel A, SCSI Id=7, 16/255 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
ahc0: target 0 Tagged Queuing Device
sd0 at scbus0 target 0 lun 0
sd0: <IBM DSAS-3540 S47W> type 0 fixed SCSI 2
sd0: Direct-Access 522MB (1070496 512 byte sectors)
ahc0: target 2 Tagged Queuing Device
sd1 at scbus0 target 2 lun 0
sd1: <QUANTUM FIREBALL_TM3200S 300X> type 0 fixed SCSI 2
sd1: Direct-Access 3067MB (6281856 512 byte sectors)
ahc1: <Adaptec 3940 Ultra SCSI host adapter> rev 0x00 int a irq 19 on pci1.5.0
ahc1: aic7880 Channel B, SCSI Id=7, 16/255 SCBs
ahc1: waiting for scsi devices to settle
scbus1 at ahc1 bus 0
ahc1: target 3 Tagged Queuing Device
sd2 at scbus1 target 3 lun 0
sd2: <QUANTUM FIREBALL_TM3200S 300X> type 0 fixed SCSI 2
sd2: Direct-Access 3067MB (6281856 512 byte sectors)
ahc1: target 4 Tagged Queuing Device
sd3 at scbus1 target 4 lun 0
sd3: <QUANTUM EMPIRE_2100S 1022> type 0 fixed SCSI 2
sd3: Direct-Access 2006MB (4108600 512 byte sectors)
Probing for PnP devices:
CSN 1 Vendor ID: CTL0044 [0x44008c0e] Serial 0x10005b38
pcm1 (SB16pnp <SB AWE64 PnP> sn 0x10005b38) failed to attach
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
pcm0 at 0xffff irq 5 drq 1 mem 0x0 flags 0x0 en 1 confl 0
mss_probe: no address supplied, try default 0x530
mss_detect error, busy still set (0xff)
sb_probe: no address supplied, try defaults (0x220,0x240)
device at 0x220 already attached as unit 1
pcm0 not found
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <ALPS ELECTRIC CO.,LTD. DC544C/SW03B>, removable, iordy
atapi0.0: unknown phase
wdc1 not found at 0x170
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
DEVFS: ready to run
APIC_IO: routing 8254 via 8259 on pin 0
ccd0-3: Concatenated disk drivers
SMP: AP CPU #1 Launched!
de0: enabling Full Duplex 100baseTX port
mountmsdosfs(): Warning: root directory is not a multiple of the clustersize in length

--QoSWH+UP9D9v3lNM--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19971013162553.43739>