Date: Mon, 29 Sep 2014 23:03:33 -0700 From: Rui Paulo <rpaulo@me.com> To: Russell Haley <russ.haley@gmail.com> Cc: freebsd-arm@freebsd.org Subject: Re: Digi CCWMX53 Message-ID: <F30B6F69-D28D-4F42-8995-4373917C76EB@me.com> In-Reply-To: <CABx9NuTx0aSyjm4vEQ3D7wzx6eqwmFmmWkEf=yLr9hxujxcD%2Bw@mail.gmail.com> References: <CABx9NuQr%2BdEb_yj3ypEe6Sb_qPY%2BqP74n0x1K5=_K6Zoio2vkw@mail.gmail.com> <C439A1ED-8AA0-4CA5-B375-D80E8BD4C624@me.com> <CABx9NuTU=E7ceQ=5=Qk%2B=e9jwLjnJZf2Lr70d7XbwAYRD5nd7Q@mail.gmail.com> <E12E12A8-32B9-4B26-B6C4-65DF9F43C396@me.com> <CABx9NuTkMcvX9gtLrEBO0cd7Kw%2B5mx4%2B1N9Z-02F9NGfueORjw@mail.gmail.com> <CABx9NuTx0aSyjm4vEQ3D7wzx6eqwmFmmWkEf=yLr9hxujxcD%2Bw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sep 29, 2014, at 22:15, Russell Haley <russ.haley@gmail.com> wrote: >=20 > Rui, >=20 > I've been able to build a kernel and upload it - again using a "Linux" > version of the CCWMX53 u-boot - but it didn't boot. I cloned your git = repo > but I'm confuded (confused and befuddled or just a typo?) on how to = cross > compile it. Do I set "devenvvar" (?) to somehow point into my latest > buildworld output and then just call make? Again I can only point to = the > arndale board setup but even those instructions "feel" incomplete to = my > novice brain. I've added instructions here: https://wiki.freebsd.org/Digi-CCWMX53 NOTE: you don't need to install a new U-Boot to boot FreeBSD. > Any direction you could provide would be great. Here is my > latest boot output: >=20 >=20 > U-Boot 2009.08 - dub-1.6.4.1 - (Sep 25 2014 - 09:51:55) - GCC 4.4.6 > for ConnectCore for i.MX53 on a JumpStart Kit Development Board > I2C: ready > NAND: 512 MiB > MMC: FSL_ESDHC: 0, FSL_ESDHC: 1 > DRAM: 1 GB > In: serial > Out: serial > Err: serial > Net: FEC0 [PRIME] > Hit any key to stop autoboot: 0 > FEC: enable RMII gasket > Using FEC0 device > TFTP from server 192.168.0.55; our IP address is 192.168.0.1 > Filename 'kernel.bin'. > Load address: 0x70800000 > Loading: = ################################################################# > = ################################################################# > = ################################################################# > = ################################################################# > = ################################################################# > ############ > done > Bytes transferred =3D 4934472 (4b4b48 hex) > ## Starting application at 0x70800100 ... Have you tried the regular kernel? kernel.bin probably has the load = address set to 0. =20 -- Rui Paulo
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F30B6F69-D28D-4F42-8995-4373917C76EB>