Date: Thu, 26 Dec 2002 15:05:21 +0000 From: "George J.V. Cox" <gjvc@extremis.net> To: freebsd-stable@freebsd.org Subject: Re: Broadcom BCM5703X Gigabit Ethernet woes Message-ID: <20021226150521.GC2172@beaujolais.extremis.net> In-Reply-To: <20021224142046.GA52116@beaujolais.extremis.net> References: <20021224142046.GA52116@beaujolais.extremis.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 24/12 14:20, George J.V. Cox wrote: > I have a Dell 1655MC blade server. It's a chassis of 6 PCs in a 3U case. Each > blade has two Broadcom BCM5703 interfaces. Unfortunately, its behaviour is > rather non-deterministic. The chassis allows one to access the serial port of Replying to one's own message is rather uncouth, but I'm keen to get this fixed. I've added some diagnostics to the bge driver, and from what I can tell, the problem is that the PHY is not always identified. In this case, it was, and the the output below from brgphy_probe() shows that it's not being detected. Any help would be greatly appreciated in saving me from RH8! :-) best; gjvc bge0: <Broadcom BCM5703X Gigabit Ethernet> mem 0xed010000-0xed01ffff irq 10 at device 10.0 on pci1 bge0: resetting bge0: PCISTATE register timed out bge0: conventional PCI mode bge0: Ethernet address: 00:06:5b:0e:6d:1c bge0: ASIC revision BCM5703 A2 bge0: media type is unset miibus_probe miibus0: <MII bus> on bge0 brgphy_probe: probe failed!, MII_OUI(ma->mii_id1, ma->mii_id2) = 0x3308, MII_MODEL(mii_id2) = 0xc08 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 100baseTX-FDX, 100baseT4, auto bge1: chip revision id 0x00001002 bge1: <Broadcom BCM5703X Gigabit Ethernet> mem 0xed000000-0xed00ffff irq 7 at device 11.0 on pci1 bge1: resetting bge1: PCISTATE register timed out bge1: conventional PCI mode bge1: Ethernet address: 00:06:5b:0e:6d:1d bge1: ASIC revision BCM5703 A2 bge1: media type is unset bge1: MII without any PHY! Furthermore, something is very wacked on here, because another blade server in this bunch tells me sometimes that the media type is fiber, which is incorrect, and doesn't seem to even call mii_phy_probe() :-( bge0: chip revision id 0x00001002 bge0: <Broadcom BCM5703X Gigabit Ethernet> mem 0xed010000-0xed01ffff irq 10 at device 10.0 on pci1 bge0: resetting bge0: PCISTATE register timed out bge0: conventional PCI mode bge0: Ethernet address: 00:b0:d0:fe:d2:26 bge0: ASIC revision BCM5703 A2 bge0: media type is fiber bge1: chip revision id 0x00001002 bge1: <Broadcom BCM5703X Gigabit Ethernet> mem 0xed000000-0xed00ffff irq 7 at device 11.0 on pci1 bge1: resetting bge1: PCISTATE register timed out bge1: conventional PCI mode bge1: Ethernet address: 00:b0:d0:fe:d2:27 -- [gjvc] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021226150521.GC2172>