Date: Tue, 19 Dec 2006 21:57:12 -0800 (PST) From: neha_makhija <neha.makhija@honeywell.com> To: freebsd-arm@freebsd.org Subject: Re: Application not working when Power OFF/ON is done while on reset its working Message-ID: <7985193.post@talk.nabble.com> In-Reply-To: <20061219.091449.1973603691.imp@bsdimp.com> References: <7943626.post@talk.nabble.com> <20061219.091449.1973603691.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
M. Warner Losh wrote: > > In message: <7943626.post@talk.nabble.com> > neha_makhija <neha.makhija@honeywell.com> writes: > : I am working on AT91RM9200 development board with ecos ported over it. I > : have burnt the flash with the redboot image. When i turn off the board > and > : then turn it ON then the code doesnt work and doesnt show anything on > the > : hyperterminal. But if i reset the board then the code is working fine. > > I'm guessing something is wrong with the power up sequence such that > the boot flash isn't quite right by the time the AT91RM9200 starts its > boot sequence. >>>>> The problem is not with the boot sequence because when the power is >>>>> turned ON then it displays all the details related to the hardware >>>>> initialization but later it stucks sumwhere and that hardware is not >>>>> configured fully. > But when i reset it then again it displays the whole details regarding the > hardware initialization and then this time it doesnt stuck anywhere. > Any idea y it is happening . > > > : Can u please suggest me the possible reason alongwith the solution of > this > : problem as soon as possible. > > There is only one solution: install FreeBSD :-). It has nothing to do > with your problem, but will solve all your other problems. > > Neha > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > > -- View this message in context: http://www.nabble.com/Application-not-working-when-Power-OFF-ON-is-done-while-on-reset-its-working-tf2844769.html#a7985193 Sent from the freebsd-arm mailing list archive at Nabble.com.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7985193.post>