Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 29 Apr 2000 07:00:50 -0800 (AKDT)
From:      Mike Tibor <tibor@tibor.org>
To:        kdulzo@gerp.org
Cc:        freebsd-alpha@freebsd.org
Subject:   Re: PC164 Troubles
Message-ID:  <Pine.LNX.4.04.10004290648500.10065-100000@alpha.tibor.org>
In-Reply-To: <20000428124555.A30435@caffeine.gerp.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 28 Apr 2000, Kevin M. Dulzo wrote:

> 	I have searched and read everything I can find on this subject,
> but still cannot seem to find any diagnostic documentation for an 
> alpha PC164 board.  I picked it up on ebay from Sysmerica, 500Mhz.
> 4 32M 72pin Parity SIMMs (one 60ns, 3 70ns).  Tried about 6 different
> video cards and cannot get a screen.  Does anyone have any suggestions?

I have the very same board from the same source.  The memory should be
fine--the fact that one simm differs in that it can handle 60ns where
the others are rated for 70ns wouldn't matter in the least.  The main
thing is whether they're true 36 bit parity simms.  I think if they
weren't you'd hear a series of beeps, which you don't mention.

> I put the 50hz oscillator in (I think backwards for a moment, is that bad?)

Nope, in fact it's required if you want to run the cpu at 500MHz.  The
cpu speed is directly tied to the oscillator frequency (the jumpers on
the motherboard don't affect the cpu frequency).

> I removed all the frequency jumpers (multiplier of 15)
> 128bit Memory jumper is on (4 SIMMs)
> Power supply powers up, standard ATX case/ps from Global (I hope I did not
> botch my solder job to fix the power switch).
> 
> Sometimes I get garble out of the serial ports like:
> ..xxx..x.DSD

Sounds like it's trying to spit something out.  Can't help you there
though--I've never used the serial console.

Do you see anything at all on the monitor?  When I first powered on
mine, all I got was a blue screen but nothing else.  I hit the return
key a couple of times and the SRM prompt popped up.  I then typed "set
console graphics" to fix it.

Mike
--
Mike Tibor         Univ. of Alaska Anchorage    (907) 786-1001 voice
Network Technician      Consortium Library      (907) 786-6050   fax
tibor@lib.uaa.alaska.edu       http://www.lib.uaa.alaska.edu/~tibor/
http://www.lib.uaa.alaska.edu/~tibor/pgpkey  for PGP public key




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.04.10004290648500.10065-100000>