Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 29 Apr 2026 19:51:15 +0000 (GMT)
From:      jenkins-admin@FreeBSD.org
To:        glebius@FreeBSD.org, dev-ci@FreeBSD.org
Cc:        jenkins-admin@FreeBSD.org
Subject:   FreeBSD-main-amd64-gcc14_build - Build #3539 - Still Failing
Message-ID:  <441789378.349.1777492277372@jenkins.ci.freebsd.org>
In-Reply-To: <1747427800.343.1777488218929@jenkins.ci.freebsd.org>

index | next in thread | previous in thread | raw e-mail

FreeBSD-main-amd64-gcc14_build - Build #3539 (6883b120c53735ff1681ef96d257f376731f56b3) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-gcc14_build/3539/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-gcc14_build/3539/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-gcc14_build/3539/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

9b8eb70ca974c2c700f228adaceb9a6b9e918d00 by glebius:
inpcb: improve some internal function names

6883b120c53735ff1681ef96d257f376731f56b3 by glebius:
inpcb: allow to specify different sizes for port and load balance hashes



The end of the build log:

[...truncated 86.30 MiB...]
      |                                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:516:17: note: in expansion of macro 'READ_REMOTE_CHECK'
  516 |                 READ_REMOTE_CHECK("connect", 2);
      |                 ^~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:500:58: warning: ' [' directive output may be truncated writing 2 bytes into a region of size between 0 and 1024 [-Wformat-truncation=]
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                                                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:529:25: note: in expansion of macro 'READ_REMOTE_CHECK'
  529 |                         READ_REMOTE_CHECK("connect", 2);
      |                         ^~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:500:61: note: format string is defined here
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                                                             ^~
/workspace/src/contrib/dma/net.c:500:25: note: 'snprintf' output between 31 and 2123 bytes into a destination of size 1024
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  501 |                                  host->host, host->addr, c, neterr);    \
      |                                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:529:25: note: in expansion of macro 'READ_REMOTE_CHECK'
  529 |                         READ_REMOTE_CHECK("connect", 2);
      |                         ^~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:560:73: warning: '%s' directive output may be truncated writing up to 1024 bytes into a region of size 1010 [-Wformat-truncation=]
  560 |                         snprintf(errmsg, sizeof(errmsg), "SMTP login to %s failed", host->host);
      |                                                                         ^~
/workspace/src/contrib/dma/net.c:560:25: note: 'snprintf' output between 22 and 1046 bytes into a destination of size 1024
  560 |                         snprintf(errmsg, sizeof(errmsg), "SMTP login to %s failed", host->host);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:500:58: warning: ' [' directive output may be truncated writing 2 bytes into a region of size between 0 and 1024 [-Wformat-truncation=]
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                                                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:583:17: note: in expansion of macro 'READ_REMOTE_CHECK'
  583 |                 READ_REMOTE_CHECK("RCPT TO", 2);
      |                 ^~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:500:61: note: format string is defined here
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                                                             ^~
/workspace/src/contrib/dma/net.c:500:25: note: 'snprintf' output between 31 and 2123 bytes into a destination of size 1024
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  501 |                                  host->host, host->addr, c, neterr);    \
      |                                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:583:17: note: in expansion of macro 'READ_REMOTE_CHECK'
  583 |                 READ_REMOTE_CHECK("RCPT TO", 2);
      |                 ^~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:500:58: warning: ' [' directive output may be truncated writing 2 bytes into a region of size between 0 and 1024 [-Wformat-truncation=]
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                                                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:620:9: note: in expansion of macro 'READ_REMOTE_CHECK'
  620 |         READ_REMOTE_CHECK("final DATA", 2);
      |         ^~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:500:61: note: format string is defined here
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                                                             ^~
/workspace/src/contrib/dma/net.c:500:25: note: 'snprintf' output between 34 and 2126 bytes into a destination of size 1024
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  501 |                                  host->host, host->addr, c, neterr);    \
      |                                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:620:9: note: in expansion of macro 'READ_REMOTE_CHECK'
  620 |         READ_REMOTE_CHECK("final DATA", 2);
      |         ^~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:500:58: warning: ' [' directive output may be truncated writing 2 bytes into a region of size between 0 and 1024 [-Wformat-truncation=]
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                                                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:588:9: note: in expansion of macro 'READ_REMOTE_CHECK'
  588 |         READ_REMOTE_CHECK("DATA", 3);
      |         ^~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:500:61: note: format string is defined here
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                                                             ^~
/workspace/src/contrib/dma/net.c:500:25: note: 'snprintf' output between 28 and 2120 bytes into a destination of size 1024
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  501 |                                  host->host, host->addr, c, neterr);    \
      |                                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:588:9: note: in expansion of macro 'READ_REMOTE_CHECK'
  588 |         READ_REMOTE_CHECK("DATA", 3);
      |         ^~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:500:58: warning: ' [' directive output may be truncated writing 2 bytes into a region of size between 0 and 1024 [-Wformat-truncation=]
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                                                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:572:9: note: in expansion of macro 'READ_REMOTE_CHECK'
  572 |         READ_REMOTE_CHECK("MAIL FROM", 2);
      |         ^~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:500:61: note: format string is defined here
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                                                             ^~
/workspace/src/contrib/dma/net.c:500:25: note: 'snprintf' output between 33 and 2125 bytes into a destination of size 1024
  500 |                         snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  501 |                                  host->host, host->addr, c, neterr);    \
      |                                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/workspace/src/contrib/dma/net.c:572:9: note: in expansion of macro 'READ_REMOTE_CHECK'
  572 |         READ_REMOTE_CHECK("MAIL FROM", 2);
      |         ^~~~~~~~~~~~~~~~~
--- all_subdir_bin ---
/workspace/src/bin/sh/eval.c: In function 'exphere':
/workspace/src/bin/sh/eval.c:490:13: warning: variable 'need_longjmp' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
  490 |         int need_longjmp = 0;
      |             ^~~~~~~~~~~~
--- all_subdir_cddl ---
/usr/local/bin/x86_64-unknown-freebsd15.0-ld: /tmp/obj/workspace/src/amd64.amd64/tmp/usr/lib/libzpool.so: undefined reference to `ZSTD_XXH64'
--- all_subdir_sbin ---
--- dmesg.8.gz ---
--- all_subdir_cddl ---
/usr/local/bin/x86_64-unknown-freebsd15.0-ld: /tmp/obj/workspace/src/amd64.amd64/tmp/usr/lib/libzpool.so: undefined reference to `ZSTD_XXH64_digest'
/usr/local/bin/x86_64-unknown-freebsd15.0-ld: /tmp/obj/workspace/src/amd64.amd64/tmp/usr/lib/libzpool.so: undefined reference to `ZSTD_XXH64_reset'
/usr/local/bin/x86_64-unknown-freebsd15.0-ld: /tmp/obj/workspace/src/amd64.amd64/tmp/usr/lib/libzpool.so: undefined reference to `ZSTD_XXH64_update'
/usr/local/bin/x86_64-unknown-freebsd15.0-ld: /tmp/obj/workspace/src/amd64.amd64/tmp/usr/lib/libzpool.so: undefined reference to `ZSTD_isError'
--- all_subdir_sbin ---
gzip -cn /workspace/src/sbin/dmesg/dmesg.8 > dmesg.8.gz
--- dmesg.debug ---
/usr/local/x86_64-unknown-freebsd15.0/bin/objcopy --only-keep-debug dmesg.full dmesg.debug
--- all_subdir_cddl ---
collect2: error: ld returned 1 exit status
*** [zinject.full] Error code 1

make[5]: stopped making "all" in /workspace/src/cddl/usr.bin/zinject
make[5]: 1 error

make[5]: stopped making "all" in /workspace/src/cddl/usr.bin/zinject

make[4]: stopped making "all" in /workspace/src/cddl/usr.bin

make[3]: stopped making "all" in /workspace/src/cddl
--- all_subdir_sbin ---

make[3]: stopped making "all" in /workspace/src/sbin
--- all_subdir_cddl ---

make[2]: stopped making "all" in /workspace/src
--- all_subdir_sbin ---

make[2]: stopped making "all" in /workspace/src
--- all_subdir_stand ---
--- all_subdir_stand/libsa32 ---


make[3]: stopped making "all" in /workspace/src/stand
--- all_subdir_libexec ---


make[4]: stopped making "all" in /workspace/src/libexec/dma

make[3]: stopped making "all" in /workspace/src/libexec

make[2]: stopped making "all" in /workspace/src
--- all_subdir_rescue ---
/workspace/src/bin/sh/eval.c: In function 'evalcommand':
/workspace/src/bin/sh/eval.c:866:13: warning: variable 'mode' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
  866 |         int mode;
      |             ^~~~
/workspace/src/bin/sh/eval.c:871:24: warning: variable 'savehandler' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
  871 |         struct jmploc *savehandler;
      |                        ^~~~~~~~~~~
/workspace/src/bin/sh/eval.c:857:34: warning: argument 'flags' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
  857 | evalcommand(union node *cmd, int flags, struct backcmd *backcmd)
      |                              ~~~~^~~~~
--- all_subdir_bin ---
/workspace/src/bin/sh/eval.c: In function 'evalcommand':
/workspace/src/bin/sh/eval.c:866:13: warning: variable 'mode' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
  866 |         int mode;
      |             ^~~~
/workspace/src/bin/sh/eval.c:871:24: warning: variable 'savehandler' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
  871 |         struct jmploc *savehandler;
      |                        ^~~~~~~~~~~
/workspace/src/bin/sh/eval.c:857:34: warning: argument 'flags' might be clobbered by 'longjmp' or 'vfork' [-Wclobbered]
  857 | evalcommand(union node *cmd, int flags, struct backcmd *backcmd)
      |                              ~~~~^~~~~
--- all_subdir_secure ---


make[4]: stopped making "all" in /workspace/src/secure/usr.bin

make[3]: stopped making "all" in /workspace/src/secure
--- all_subdir_rescue ---


make[5]: stopped making "objs" in /tmp/obj/workspace/src/amd64.amd64/rescue/rescue

make[4]: stopped making "all" in /workspace/src/rescue/rescue

make[3]: stopped making "all" in /workspace/src/rescue

make[2]: stopped making "all" in /workspace/src
--- all_subdir_secure ---
--- all_subdir_secure/libexec ---


make[4]: stopped making "all" in /workspace/src/secure/libexec

make[3]: stopped making "all" in /workspace/src/secure

make[2]: stopped making "all" in /workspace/src
--- all_subdir_krb5 ---


make[5]: stopped making "all" in /workspace/src/krb5/plugins/preauth

make[4]: stopped making "all" in /workspace/src/krb5/plugins

make[3]: stopped making "all" in /workspace/src/krb5

make[2]: stopped making "all" in /workspace/src
--- all_subdir_bin ---


make[3]: stopped making "all" in /workspace/src/bin

make[2]: stopped making "all" in /workspace/src
--- all_subdir_share ---

make[3]: stopped making "all" in /workspace/src/share

make[2]: stopped making "all" in /workspace/src
--- all_subdir_stand ---
--- all_subdir_stand/libsa ---


make[3]: stopped making "all" in /workspace/src/stand

make[2]: stopped making "all" in /workspace/src
--- all_subdir_lib ---


make[5]: stopped making "all" in /workspace/src/lib/msun/tests

make[4]: stopped making "all" in /workspace/src/lib/msun

make[3]: stopped making "all" in /workspace/src/lib

make[2]: stopped making "all" in /workspace/src
       42.36 real       266.99 user        27.37 sys

make[1]: stopped making "buildworld" in /workspace/src

make: stopped making "buildworld" in /workspace/src
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-gcc14_build] $ /bin/sh -xe /tmp/jenkins16022218470250413590.sh
+ sh freebsd-ci/scripts/jail/clean.sh
clean jail FreeBSD-main-amd64-gcc14_build
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address
home | help

Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?441789378.349.1777492277372>