Date: Sun, 30 Jun 2002 11:11:47 -0700 From: "Endsley, Michael A" <mendsley@unocal.com> To: "'questions@FreeBSD.ORG'" <questions@FreeBSD.ORG> Cc: "'mandm@alaska.com'" <mandm@alaska.com> Subject: Re:Harddrive led on all the time Message-ID: <530D9398032ED511A02C0008C7B942BA4C9944@defiant.anchortown.unocal.com>
next in thread | raw e-mail | index | archive | help
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C22061.993D4080
Content-Type: text/plain
Forgot the dmesg :(
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Calibrating clock(s) ... TSC clock: 900050192 Hz, i8254 clock: 1193205 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) Processor (900.04-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 268369920 (262080K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004f7000 - 0x0ffe7fff, 263131136 bytes (64241 pages)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 256212992 (250208K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdac0
bios32: Entry = 0xfdad0 (c00fdad0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdaf1
pnpbios: Found PnP BIOS data at 0xc00f7ff0
pnpbios: Entry = f0000:6b84 Rev = 1.0
Other BIOS signatures found:
ACPI: 000fc3e0
Preloaded elf kernel "kernel" at 0xc04d0000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04d00a8.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003844
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=164710b9)
Using $PIR table, 11 entries at 0xc00f8660
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x10b9, dev=0x1647, revid=0x04
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 27
found-> vendor=0x10b9, dev=0x5247, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x10b9, dev=0x5229, revid=0xc4
class=01-01-fa, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[20]: type 1, range 32, base 0000ff00, size 4
found-> vendor=0x10b9, dev=0x1533, revid=0x00
class=06-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x10ec, dev=0x8139, revid=0x10
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000dc00, size 8
map[14]: type 1, range 32, base dfffaf00, size 8
found-> vendor=0x1002, dev=0x5245, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base d8000000, size 26
map[14]: type 1, range 32, base 0000d800, size 8
map[18]: type 1, range 32, base dfffc000, size 14
found-> vendor=0x11c1, dev=0x0480, revid=0x00
class=07-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base dfffae00, size 8
map[14]: type 1, range 32, base 0000d400, size 8
map[18]: type 1, range 32, base 0000d000, size 8
map[1c]: type 1, range 32, base 0000cc00, size 3
found-> vendor=0x10b9, dev=0x7101, revid=0x00
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
atapci0: <AcerLabs Aladdin ATA100 controller> port 0xff00-0xff0f irq 0 at
device 4.0 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xff00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xff08
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=00 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem
0xdfffaf00-0xdfffafff irq 11 at device 8.0 on pci0
rl0: Ethernet address: 00:d0:09:d9:87:81
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: rl0 attached
pci0: <ATI Rage128-RE graphics accelerator> (vendor=0x1002, dev=0x5245) at
9.0 irq 0
sio0: irq maps: 0x3 0x23 0x3 0x3
sio0: <Lucent kermit based PCI Modem> port
0xcc00-0xcc07,0xd000-0xd0ff,0xd400-0xd4ff mem 0xdfffae00-0xdfffaeff irq 5 at
device 10.0 on pci0
sio0: moving to sio4
sio4: type 16550A
chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd47ff,0xd4800-0xd7fff
on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0: not probed (disabled)
bt0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this
adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c040, tty 6310ba, net 6718ba
bpf: sl0 attached
bpf: faith0 attached
ad0: success setting UDMA5 on Acer chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <MAXTOR 6L020J1/A93.0500> ATA-5 disk at ata0-master
ad0: 19595MB (40132503 sectors), 39813 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=6 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <FX3400S/u01> CDROM drive at ata1 as master
acd0: read 5857KB/s (27522KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1-slave: piomode=3 dmamode=-1 udmamode=-1 dmaflag=0
ata1-slave: success setting PIO3 on generic chip
Creating DISK afd0
afd0: <IOMEGA ZIP 100 ATAPI Floppy/12.A> rewriteable drive at ata1 as slave
afd0: 96MB (196608 sectors), 96 cyls, 64 heads, 32 S/T, 512 B/S
afd0: 0KB/s, transfer limit 64 blks, PIO3
Mounting root from ufs:/dev/ad0s4a
ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying
ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying
ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying
ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0)ad0: success
setting PIO4 on generic chip
falling back to PIO mode
ad0s1: type 0x17, start 63, end = 4128704, size 4128642 : OK
ad0s2: type 0x1b, start 8434125, end = 13285754, size 4851630 : OK
ad0s3: type 0xf, start 13285755, end = 40130369, size 26844615 : OK
ad0s4: type 0xa5, start 4128705, end = 8434124, size 4305420 : OK
ad0s5: type 0xb, start 13285818, end = 17607239, size 4321422 : OK
ad0<extended>: type 0x5, start 17607240, end = 40130369, size 22523130
ad0<extended>: C/H/S start 1023/0/1 (16434495) != start 17607240: invalid
ad0s6: type 0xb, start 17607303, end = 40130369, size 22523067
ad0s6: C/H/S start 1023/1/1 (16434558) != start 17607303: invalid
start_init: trying /sbin/init
splash: image decoder found: snake_saver
bpf: tun0 attached
afd0s1: type 0x20, start 1919950958, end = 2464388050, size 544437093
afd0s1: C/H/S start 356/97/46 (2379738) != start 1919950958: invalid
afd0s1: C/H/S end 357/116/40 (2387484) != end 2464388050: invalid
afd0s2: type 0x6b, start 1330184202, end = 1869160489, size 538976288
afd0s2: C/H/S start 288/110/57 (1926998) != start 1330184202: invalid
afd0s2: C/H/S end 269/101/57 (1799774) != end 1869160489: invalid
afd0s3: type 0x53, start 538989391, end = 1937352302, size 1398362912
afd0s3: C/H/S start 345/32/19 (2302647) != start 538989391: invalid
afd0s3: C/H/S end 324/77/19 (2165163) != end 1937352302: invalid
afd0s4: type 0x49, start 1394627663, end = 1394648999, size 21337
afd0s4: C/H/S start 87/1/0 (580259) != start 1394627663: invalid
afd0s4: C/H/S end 335/78/2 (2238562) != end 1394648999: invalid
afd0s1: slice starts beyond end of the disk: rejecting it
afd0s2: slice starts beyond end of the disk: rejecting it
afd0s3: slice starts beyond end of the disk: rejecting it
afd0s4: slice starts beyond end of the disk: rejecting it
afd0s1: type 0x20, start 1919950958, end = 2464388050, size 544437093
afd0s1: C/H/S start 356/97/46 (2379738) != start 1919950958: invalid
afd0s1: C/H/S end 357/116/40 (2387484) != end 2464388050: invalid
afd0s2: type 0x6b, start 1330184202, end = 1869160489, size 538976288
afd0s2: C/H/S start 288/110/57 (1926998) != start 1330184202: invalid
afd0s2: C/H/S end 269/101/57 (1799774) != end 1869160489: invalid
afd0s3: type 0x53, start 538989391, end = 1937352302, size 1398362912
afd0s3: C/H/S start 345/32/19 (2302647) != start 538989391: invalid
afd0s3: C/H/S end 324/77/19 (2165163) != end 1937352302: invalid
afd0s4: type 0x49, start 1394627663, end = 1394648999, size 21337
afd0s4: C/H/S start 87/1/0 (580259) != start 1394627663: invalid
afd0s4: C/H/S end 335/78/2 (2238562) != end 1394648999: invalid
afd0s1: slice starts beyond end of the disk: rejecting it
afd0s2: slice starts beyond end of the disk: rejecting it
afd0s3: slice starts beyond end of the disk: rejecting it
afd0s4: slice starts beyond end of the disk: rejecting it
afd0s1: type 0x20, start 1919950958, end = 2464388050, size 544437093
afd0s1: C/H/S start 356/97/46 (2379738) != start 1919950958: invalid
afd0s1: C/H/S end 357/116/40 (2387484) != end 2464388050: invalid
afd0s2: type 0x6b, start 1330184202, end = 1869160489, size 538976288
afd0s2: C/H/S start 288/110/57 (1926998) != start 1330184202: invalid
afd0s2: C/H/S end 269/101/57 (1799774) != end 1869160489: invalid
afd0s3: type 0x53, start 538989391, end = 1937352302, size 1398362912
afd0s3: C/H/S start 345/32/19 (2302647) != start 538989391: invalid
afd0s3: C/H/S end 324/77/19 (2165163) != end 1937352302: invalid
afd0s4: type 0x49, start 1394627663, end = 1394648999, size 21337
afd0s4: C/H/S start 87/1/0 (580259) != start 1394627663: invalid
afd0s4: C/H/S end 335/78/2 (2238562) != end 1394648999: invalid
afd0s1: slice starts beyond end of the disk: rejecting it
afd0s2: slice starts beyond end of the disk: rejecting it
afd0s3: slice starts beyond end of the disk: rejecting it
afd0s4: slice starts beyond end of the disk: rejecting it
------_=_NextPart_001_01C22061.993D4080
Content-Type: text/html
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2653.12">
<TITLE>Re:Harddrive led on all the time</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=3D2 FACE=3D"Arial">Forgot the dmesg :( </FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">Copyright (c) 1992-2002 The =
FreeBSD Project.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Copyright (c) 1979, 1980, 1983, =
1986, 1988, 1989, 1991, 1992, 1993, 1994</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">The Regents of the University of California. All =
rights reserved.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">FreeBSD 4.6-RELEASE #0: Tue Jun =
11 06:14:12 GMT 2002</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> =
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Calibrating clock(s) ... TSC =
clock: 900050192 Hz, i8254 clock: 1193205 Hz</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CLK_USE_I8254_CALIBRATION not =
specified - using default frequency</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Timecounter =
"i8254" frequency 1193182 Hz</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CLK_USE_TSC_CALIBRATION not =
specified - using old calibration method</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CPU: AMD Athlon(tm) Processor =
(900.04-MHz 686-class CPU)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> Origin =3D =
"AuthenticAMD" Id =3D 0x642 Stepping =3D 2</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> =
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,=
MCA,CMOV,PAT,PSE36,MMX,FXSR></FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> AMD =
Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!></FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Data TLB: 24 entries, fully =
associative</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Instruction TLB: 16 entries, =
fully associative</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">L1 data cache: 64 kbytes, 64 =
bytes/line, 1 lines/tag, 2-way associative</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">L1 instruction cache: 64 =
kbytes, 64 bytes/line, 1 lines/tag, 2-way associative</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">L2 internal cache: 256 kbytes, =
64 bytes/line, 1 lines/tag, 8-way associative</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">real memory =3D 268369920 =
(262080K bytes)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Physical memory =
chunk(s):</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">0x00001000 - 0x0009efff, 647168 =
bytes (158 pages)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">0x004f7000 - 0x0ffe7fff, =
263131136 bytes (64241 pages)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di sn0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di lnc0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di ie0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di fe0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di ed0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di cs0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di bt0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di aic0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di aha0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di adv0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> q</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">avail memory =3D 256212992 =
(250208K bytes)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bios32: Found BIOS32 Service =
Directory header at 0xc00fdac0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bios32: Entry =3D 0xfdad0 =
(c00fdad0) Rev =3D 0 Len =3D 1</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pcibios: PCI BIOS entry at =
0xdaf1</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pnpbios: Found PnP BIOS data at =
0xc00f7ff0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pnpbios: Entry =3D =
f0000:6b84 Rev =3D 1.0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Other BIOS signatures =
found:</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ACPI: 000fc3e0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Preloaded elf kernel =
"kernel" at 0xc04d0000.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Preloaded userconfig_script =
"/boot/kernel.conf" at 0xc04d00a8.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Pentium Pro MTRR support =
enabled</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">md0: Malloc disk</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Creating DISK md0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Math emulator present</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci_open(1): =
mode 1 addr port (0x0cf8) is 0x80003844</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci_open(1a): =
mode1res=3D0x80000000 (0x80000000)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci_cfgcheck: =
device 0 [class=3D060000] [hdr=3D00] is there (id=3D164710b9)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Using $PIR table, 11 entries at =
0xc00f8660</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">npx0: <math processor> on =
motherboard</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">npx0: INT 16 interface</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pcib0: <Host to PCI =
bridge> on motherboard</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">found-> vendor=3D0x10b9, =
dev=3D0x1647, revid=3D0x04</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">subordinatebus=3D0 =
secondarybus=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">map[10]: type 1, range 32, base e0000000, size =
27</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">found-> vendor=3D0x10b9, =
dev=3D0x5247, revid=3D0x00</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">subordinatebus=3D1 =
secondarybus=3D1</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">found-> vendor=3D0x10b9, =
dev=3D0x5229, revid=3D0xc4</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">class=3D01-01-fa, hdrtype=3D0x00, mfdev=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">subordinatebus=3D0 =
secondarybus=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">intpin=3Da, irq=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">map[20]: type 1, range 32, base 0000ff00, =
size 4</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">found-> vendor=3D0x10b9, =
dev=3D0x1533, revid=3D0x00</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">class=3D06-01-00, hdrtype=3D0x00, mfdev=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">subordinatebus=3D0 =
secondarybus=3D0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">found-> vendor=3D0x10ec, =
dev=3D0x8139, revid=3D0x10</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">subordinatebus=3D0 =
secondarybus=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">intpin=3Da, irq=3D11</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">map[10]: type 1, range 32, base 0000dc00, =
size 8</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">map[14]: type 1, range 32, base dfffaf00, size =
; 8</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">found-> vendor=3D0x1002, =
dev=3D0x5245, revid=3D0x00</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">subordinatebus=3D0 =
secondarybus=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">intpin=3Da, irq=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">map[10]: type 1, range 32, base d8000000, size =
26</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">map[14]: type 1, range 32, base 0000d800, =
size 8</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">map[18]: type 1, range 32, base dfffc000, size =
14</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">found-> vendor=3D0x11c1, =
dev=3D0x0480, revid=3D0x00</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">class=3D07-80-00, hdrtype=3D0x00, mfdev=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">subordinatebus=3D0 =
secondarybus=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">intpin=3Da, irq=3D5</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">map[10]: type 1, range 32, base dfffae00, =
size 8</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">map[14]: type 1, range 32, base 0000d400, =
size 8</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">map[18]: type 1, range 32, base 0000d000, =
size 8</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">map[1c]: type 1, range 32, base 0000cc00, =
size 3</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">found-> vendor=3D0x10b9, =
dev=3D0x7101, revid=3D0x00</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">subordinatebus=3D0 =
secondarybus=3D0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci0: <PCI bus> on =
pcib0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pcib1: <AcerLabs M5247 =
PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci1: <PCI bus> on =
pcib1</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">atapci0: <AcerLabs Aladdin =
ATA100 controller> port 0xff00-0xff0f irq 0 at device 4.0 on =
pci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata0: iobase=3D0x01f0 =
altiobase=3D0x03f6 bmaddr=3D0xff00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata0: mask=3D03 ostat0=3D50 =
ostat2=3D00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata0-master: ATAPI 00 00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata0-slave: ATAPI 00 00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata0: mask=3D03 stat0=3D50 =
stat1=3D00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata0-master: ATA 01 a5</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata0: devices=3D01</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata0: at 0x1f0 irq 14 on =
atapci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1: iobase=3D0x0170 =
altiobase=3D0x0376 bmaddr=3D0xff08</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1: mask=3D03 ostat0=3D50 =
ostat2=3D00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1-master: ATAPI 14 eb</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1-slave: ATAPI 14 eb</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1: mask=3D03 stat0=3D00 =
stat1=3D00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1: devices=3D0c</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1: at 0x170 irq 15 on =
atapci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">isab0: <AcerLabs M1533 =
portable PCI-ISA bridge> at device 7.0 on pci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">isa0: <ISA bus> on =
isab0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">rl0: <RealTek 8139 =
10/100BaseTX> port 0xdc00-0xdcff mem 0xdfffaf00-0xdfffafff irq 11 at =
device 8.0 on pci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">rl0: Ethernet address: =
00:d0:09:d9:87:81</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">miibus0: <MII bus> on =
rl0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">rlphy0: <RealTek internal =
media interface> on miibus0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">rlphy0: 10baseT, =
10baseT-FDX, 100baseTX, 100baseTX-FDX, auto</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bpf: rl0 attached</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci0: <ATI Rage128-RE =
graphics accelerator> (vendor=3D0x1002, dev=3D0x5245) at 9.0 irq =
0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio0: irq maps: 0x3 0x23 0x3 =
0x3</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio0: <Lucent kermit based =
PCI Modem> port 0xcc00-0xcc07,0xd000-0xd0ff,0xd400-0xd4ff mem =
0xdfffae00-0xdfffaeff irq 5 at device 10.0 on pci0</FONT></P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">sio0: moving to sio4</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio4: type 16550A</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">chip1: <AcerLabs M15x3 Power =
Management Unit> at device 17.0 on pci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ex_isa_identify()</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata-: ata0 exists, using next =
available unit number</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata-: ata1 exists, using next =
available unit number</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Trying Read_Port at 203</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Trying Read_Port at 243</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Trying Read_Port at 283</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Trying Read_Port at 2c3</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Trying Read_Port at 303</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Trying Read_Port at 343</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Trying Read_Port at 383</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Trying Read_Port at 3c3</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">isa_probe_children: disabling =
PnP devices</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">isa_probe_children: probing =
non-PnP devices</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">orm0: <Option ROMs> at =
iomem 0xc0000-0xc7fff,0xc8000-0xd47ff,0xd4800-0xd7fff on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">fdc0: <NEC 72065B or =
clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">fdc0: FIFO enabled, 8 bytes =
threshold</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">fd0: <1440-KB 3.5" =
drive> on fdc0 drive 0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata2 failed to probe at port =
0x1f0 irq 14 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata3 failed to probe at port =
0x170 irq 15 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">adv0: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bt0: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">aha0: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">aic0: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">atkbdc0: <Keyboard =
controller (i8042)> at port 0x60,0x64 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">atkbd0: <AT Keyboard> =
flags 0x1 irq 1 on atkbdc0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">atkbd: the current kbd =
controller command byte 0047</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">atkbd: keyboard ID 0x41ab =
(2)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">kbd0 at atkbd0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">kbd0: atkbd0, AT 101/102 (2), =
config:0x1, flags:0x3d0000</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">psm0: current command =
byte:0047</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">psm0: <PS/2 Mouse> irq 12 =
on atkbdc0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">psm0: model NetMouse/NetScroll =
Optical, device ID 0-00, 3 buttons</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">psm0: config:00000000, =
flags:00000000, packet size:4</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">psm0: syncmask:08, =
syncbits:08</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">vga0: <Generic ISA VGA> =
at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">fb0: vga0, vga, type:VGA (5), =
flags:0x7007f</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">fb0: port:0x3c0-0x3df, =
crtc:0x3d4, mem:0xa0000 0x20000</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">fb0: init mode:24, bios mode:3, =
current mode:24</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">fb0: window:0xc00b8000 size:32k =
gran:32k, buf:0 size:32k</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">vga0: vga: WARNING: video mode =
switching is not fully supported on this adapter</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">VGA parameters upon =
power-up</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">50 18 10 00 00 00 03 00 02 67 =
5f 4f 50 82 55 81 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bf 1f 00 4f 0d 0e 00 00 06 e0 =
9c 8e 8f 28 1f 96 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">b9 a3 ff 00 01 02 03 04 05 14 =
07 38 39 3a 3b 3c </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">3d 3e 3f 0c 00 0f 08 00 00 00 =
00 00 10 0e 00 ff </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">VGA parameters in BIOS for mode =
24</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ff ff ff ff ff ff ff ff ff ff =
ff ff ff ff ff ff </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ff ff ff ff ff ff ff ff ff ff =
ff ff ff ff ff ff </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ff ff ff ff ff ff ff ff ff ff =
ff ff ff ff ff ff </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ff ff ff ff ff ff ff ff ff ff =
ff ff ff ff ff ff </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">EGA/VGA parameters to be used =
for mode 24</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">50 18 10 00 00 00 03 00 02 67 =
5f 4f 50 82 55 81 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bf 1f 00 4f 0d 0e 00 00 06 e0 =
9c 8e 8f 28 1f 96 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">b9 a3 ff 00 01 02 03 04 05 14 =
07 38 39 3a 3b 3c </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">3d 3e 3f 0c 00 0f 08 00 00 00 =
00 00 10 0e 00 ff </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sc0: <System console> at =
flags 0x100 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sc0: VGA <16 virtual =
consoles, flags=3D0x300></FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sc0: fb0, kbd0, terminal =
emulator: sc (syscons terminal)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pcic0 failed to probe at port =
0x3e0 iomem 0xd0000 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pcic1: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio0: irq maps: 0x41 0x51 0x41 =
0x41</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio0 at port 0x3f8-0x3ff irq 4 =
flags 0x10 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio0: type 16550A</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio1: irq maps: 0x41 0x49 0x41 =
0x41</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio1 at port 0x2f8-0x2ff irq 3 =
on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio1: type 16550A</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio2: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio3: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ppc0: parallel port found at =
0x378</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ppc0: using extended I/O port =
range</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ppc0: EPP SPP</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ppc0: <Parallel port> at =
port 0x378-0x37f irq 7 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ppc0: Generic chipset =
(EPP/NIBBLE) in COMPATIBLE mode</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">plip0: <PLIP network =
interface> on ppbus0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bpf: lp0 attached</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">lpt0: <Printer> on =
ppbus0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">lpt0: Interrupt-driven =
port</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ppi0: <Parallel I/O> on =
ppbus0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ed0: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">fe0: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ie0: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">lnc0: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">cs0: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sn0: not probed =
(disabled)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">isa_probe_children: probing PnP =
devices</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">BIOS Geometries:</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 0:03fefe3f 0..1022=3D1023 =
cylinders, 0..254=3D255 heads, 1..63=3D63 sectors</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 0 accounted for</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Device configuration =
finished.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bpf: lo0 attached</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bpf: ppp0 attached</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">new masks: bio 68c040, tty =
6310ba, net 6718ba</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bpf: sl0 attached</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bpf: faith0 attached</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0: success setting UDMA5 on =
Acer chip</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Creating DISK ad0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ar: FreeBSD check1 =
failed</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0: <MAXTOR =
6L020J1/A93.0500> ATA-5 disk at ata0-master</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0: 19595MB (40132503 =
sectors), 39813 C, 16 H, 63 S, 512 B</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0: 16 secs/int, 1 depth =
queue, UDMA100</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0: piomode=3D4 dmamode=3D2 =
udmamode=3D6 cblid=3D1</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1-master: piomode=3D4 =
dmamode=3D2 udmamode=3D-1 dmaflag=3D1</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1-master: success setting =
PIO4 on generic chip</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">acd0: <FX3400S/u01> CDROM =
drive at ata1 as master</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">acd0: read 5857KB/s =
(27522KB/s), 128KB buffer, PIO4</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">acd0: Reads: CD-R, CD-RW, CD-DA =
stream, packet</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">acd0: Writes:</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">acd0: Audio: play, 255 volume =
levels</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">acd0: Mechanism: ejectable =
tray, unlocked</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">acd0: Medium: no/blank =
disc</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1-slave: piomode=3D3 =
dmamode=3D-1 udmamode=3D-1 dmaflag=3D0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1-slave: success setting =
PIO3 on generic chip</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Creating DISK afd0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0: <IOMEGA ZIP 100 ATAPI =
Floppy/12.A> rewriteable drive at ata1 as slave</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0: 96MB (196608 sectors), 96 =
cyls, 64 heads, 32 S/T, 512 B/S</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0: 0KB/s, transfer limit 64 =
blks, PIO3</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">Mounting root from =
ufs:/dev/ad0s4a</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0: UDMA ICRC error reading =
fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0: UDMA ICRC error reading =
fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0: UDMA ICRC error reading =
fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0: UDMA ICRC error reading =
fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0)ad0: success setting PIO4 on generic =
chip</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> falling back to PIO =
mode</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0s1: type 0x17, start 63, end =
=3D 4128704, size 4128642 : OK</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0s2: type 0x1b, start =
8434125, end =3D 13285754, size 4851630 : OK</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0s3: type 0xf, start =
13285755, end =3D 40130369, size 26844615 : OK</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0s4: type 0xa5, start =
4128705, end =3D 8434124, size 4305420 : OK</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0s5: type 0xb, start =
13285818, end =3D 17607239, size 4321422 : OK</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0<extended>: type 0x5, =
start 17607240, end =3D 40130369, size 22523130 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0<extended>: C/H/S =
start 1023/0/1 (16434495) !=3D start 17607240: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0s6: type 0xb, start =
17607303, end =3D 40130369, size 22523067 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0s6: C/H/S start 1023/1/1 =
(16434558) !=3D start 17607303: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">start_init: trying =
/sbin/init</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">splash: image decoder found: =
snake_saver</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">bpf: tun0 attached</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: type 0x20, start =
1919950958, end =3D 2464388050, size 544437093 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: C/H/S start 356/97/46 =
(2379738) !=3D start 1919950958: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: C/H/S end 357/116/40 =
(2387484) !=3D end 2464388050: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: type 0x6b, start =
1330184202, end =3D 1869160489, size 538976288 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: C/H/S start 288/110/57 =
(1926998) !=3D start 1330184202: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: C/H/S end 269/101/57 =
(1799774) !=3D end 1869160489: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: type 0x53, start =
538989391, end =3D 1937352302, size 1398362912 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: C/H/S start 345/32/19 =
(2302647) !=3D start 538989391: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: C/H/S end 324/77/19 =
(2165163) !=3D end 1937352302: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: type 0x49, start =
1394627663, end =3D 1394648999, size 21337 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: C/H/S start 87/1/0 =
(580259) !=3D start 1394627663: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: C/H/S end 335/78/2 =
(2238562) !=3D end 1394648999: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: slice starts beyond end =
of the disk: rejecting it</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: slice starts beyond end =
of the disk: rejecting it</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: slice starts beyond end =
of the disk: rejecting it</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: slice starts beyond end =
of the disk: rejecting it</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: type 0x20, start =
1919950958, end =3D 2464388050, size 544437093 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: C/H/S start 356/97/46 =
(2379738) !=3D start 1919950958: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: C/H/S end 357/116/40 =
(2387484) !=3D end 2464388050: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: type 0x6b, start =
1330184202, end =3D 1869160489, size 538976288 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: C/H/S start 288/110/57 =
(1926998) !=3D start 1330184202: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: C/H/S end 269/101/57 =
(1799774) !=3D end 1869160489: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: type 0x53, start =
538989391, end =3D 1937352302, size 1398362912 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: C/H/S start 345/32/19 =
(2302647) !=3D start 538989391: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: C/H/S end 324/77/19 =
(2165163) !=3D end 1937352302: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: type 0x49, start =
1394627663, end =3D 1394648999, size 21337 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: C/H/S start 87/1/0 =
(580259) !=3D start 1394627663: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: C/H/S end 335/78/2 =
(2238562) !=3D end 1394648999: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: slice starts beyond end =
of the disk: rejecting it</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: slice starts beyond end =
of the disk: rejecting it</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: slice starts beyond end =
of the disk: rejecting it</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: slice starts beyond end =
of the disk: rejecting it</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: type 0x20, start =
1919950958, end =3D 2464388050, size 544437093 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: C/H/S start 356/97/46 =
(2379738) !=3D start 1919950958: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: C/H/S end 357/116/40 =
(2387484) !=3D end 2464388050: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: type 0x6b, start =
1330184202, end =3D 1869160489, size 538976288 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: C/H/S start 288/110/57 =
(1926998) !=3D start 1330184202: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: C/H/S end 269/101/57 =
(1799774) !=3D end 1869160489: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: type 0x53, start =
538989391, end =3D 1937352302, size 1398362912 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: C/H/S start 345/32/19 =
(2302647) !=3D start 538989391: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: C/H/S end 324/77/19 =
(2165163) !=3D end 1937352302: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: type 0x49, start =
1394627663, end =3D 1394648999, size 21337 </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: C/H/S start 87/1/0 =
(580259) !=3D start 1394627663: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: C/H/S end 335/78/2 =
(2238562) !=3D end 1394648999: invalid</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s1: slice starts beyond end =
of the disk: rejecting it</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s2: slice starts beyond end =
of the disk: rejecting it</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s3: slice starts beyond end =
of the disk: rejecting it</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">afd0s4: slice starts beyond end =
of the disk: rejecting it</FONT>
</P>
<BR>
<BR>
<BR>
</BODY>
</HTML>
------_=_NextPart_001_01C22061.993D4080--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?530D9398032ED511A02C0008C7B942BA4C9944>