Date: Fri, 29 Sep 2000 12:30:31 -0400 From: froekjaerf@netscape.net To: freebsd-mobile@freebsd.org Subject: Linksys PCM100 Message-ID: <11875D7B.49412C80.0F2A144B@netscape.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I bought a Linksys PCM100 (not PCMPC100), but i cant get it to work.
I have installed 4.1 release from CD on a asus 7400 laptop.
It did not have an entry in the pccard.conf, so i copied the one for PCMPC100 and changed the identification string.
#Linksys EtherFast 10/100 PC Card (PCM100)
card "Linksys" "EtherFast 10/100 Integrated PC Card (PCM100)"
config 0x7 "ed0" ?
insert logger -t pccard:$device -s Linksys Fast 100-BaseT inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Linksys Fast 100-BaseT removed
remove /sbin/ifconfig $device delete
I have tried with both Irq 3, 7 and auto. 7 is what W2K uses.
But when i insert the card it says device not configured.
Here is the output:
pccardd[48]: Card "Linksys"("EtherFast 10/100 Integrated PC Card (PCM100)") [Ver 1.0] [ ] matched "Linksys" ("EtherFast 10/100 Integrated PC Card (PCM100)") [(null)] [(null)]
pccardd[48]: driver allocation failed for Linksys(EtherFast 10/100 Integrated PC Card (PCM100)): Device not configured
I don't know what other information might be relevant?
\Flemming
[-- Attachment #2 --]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-RELEASE #2: Wed Sep 27 19:45:43 PDT 2000
flemming@:/usr/src/sys/compile/ASUS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (334.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 301924352 (294848K bytes)
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 289792000 (283000K bytes)
Preloaded elf kernel "kernel" at 0xc0360000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc036009c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c42 graphics accelerator> at 0.0 irq 11
chip1: <ESS Technology Maestro 2E Audio controller> port 0xf800-0xf8ff irq 5 at device 6.0 on pci0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip2: <Intel 82371AB Power management controller> port 0x2180-0x218f at device 7.3 on pci0
pcic-pci0: <TI PCI-1220 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1220 PCI-CardBus Bridge> irq 11 at device 10.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
isa0: too many dependant configs (8)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
unknown0: <LT Win Modem> at port 0x2f8-0x2ff irq 3 drq 5,6 on isa0
ad0: 9590MB <IBM-DCXA-210000> [19485/16/63] at ata0-master using UDMA33
acd0: CDROM <CD-224E> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 1
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?11875D7B.49412C80.0F2A144B>