Date: Tue, 19 Jan 2016 11:27:07 -0800 From: Adrian Chadd <adrian.chadd@gmail.com> To: "O. Hartmann" <ohartman@zedat.fu-berlin.de> Cc: FreeBSD CURRENT <freebsd-current@freebsd.org> Subject: Re: network/ath: on CURRENT no connections possible on ath-based AP Message-ID: <CAJ-VmomGi-BacO-%2Btp5%2ByAb17S0gnJLhXZd7rQzvx_YV1cFNBQ@mail.gmail.com> In-Reply-To: <20160119201746.13674c54.ohartman@zedat.fu-berlin.de> References: <20160119201746.13674c54.ohartman@zedat.fu-berlin.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Theres been nothing in the ath code that I can think of that'd do this. Can you get me "works" and "doesn't work" revisions? thanks, -a On 19 January 2016 at 11:17, O. Hartmann <ohartman@zedat.fu-berlin.de> wrote: > Running hostapd and a Atheros based AP on recent CURRENT (FreeBSD 11.0-CURRENT #8 > r294329: Tue Jan 19 18:23:20 CET 2016 amd64), clients do not connect anymore to that > specific AP. They did a week or two ago (mobile phones, several notebooks). > > The WiFi adaptor is this one (dmesg): > > [...] > ath0: <Atheros AR938x> mem 0xf7e00000-0xf7e1ffff irq 16 at device 0.0 on pci1 > ar9300_attach: calling ar9300_hw_attach > ar9300_hw_attach: calling ar9300_eeprom_attach > ar9300_flash_map: unimplemented for now > Restoring Cal data from DRAM > Restoring Cal data from EEPROM > ar9300_hw_attach: ar9300_eeprom_attach returned 0 > ath0: [HT] enabling HT modes > ath0: [HT] enabling short-GI in 20MHz mode > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 stream STBC transmit enabled > ath0: [HT] 3 RX streams; 3 TX streams > ath0: AR9380 mac 448.3 RF5110 phy 3276.12 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 > [...] > > and from ifconfig: > > [...] > wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether xx:xx:xx:xx:xx:xx > inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255 > media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap> > status: running > ssid Berghof channel 10 (2457 MHz 11g) bssid xx:xx:xx:xx:xx:xx > regdomain ETSI country DE indoor ecm authmode WPA2/802.11i > privacy MIXED deftxkey 2 AES-CCM 2:128-bit AES-CCM 3:128-bit > txpower 30 scanvalid 60 protmode CTS wme burst dtimperiod 1 -dfs > groups: wlan > [...] > > On some earlier dmesg outputs, I see the line > > ath0: AR9380 mac 448.3 RF5110 phy 2457.9 > > instead of the most recent > > ath0: AR9380 mac 448.3 RF5110 phy 3276.12 > > I do not see any strange behaviour until clients fetch (successfully!) their IP via > isc-dhcp (isc-dhcp43-server-4.3.3P1_1), then they die or can not access the network any > further. > > Has there been a change recently? > > Kind regards, > > Oliver
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmomGi-BacO-%2Btp5%2ByAb17S0gnJLhXZd7rQzvx_YV1cFNBQ>