Date: Mon, 7 Feb 2000 17:53:27 -0500 From: Peter Radcliffe <pir@pir.net> To: freebsd-mobile@FreeBSD.ORG Subject: Adaptec 1460B, PAO3 and cdrom drive problems. Message-ID: <20000207175326.G9141@pir.net> In-Reply-To: <200002052251.OAA12829@ptavv.es.net>; from oberman@es.net on Sat, Feb 05, 2000 at 02:51:45PM -0800 References: <20000204224930.B44997@cc942873-a.ewndsr1.nj.home.com> <200002052251.OAA12829@ptavv.es.net>
next in thread | previous in thread | raw e-mail | index | archive | help
With the re-introduction of the aic driver to PAO I went out and bought an Adpatec 1460B. The laptop is a Sony 505TR running FreeBSD 3.4-PAO. After a quick kernel recompile to add all the appropriate scsi options it appeared to work fine with an external disk. I then tried with a scsi cdrom drive and although it was detected and I get the cd0: comments I don't appear to be able to use it ... I tried 3 different cdrom drives and 3 different CDs :/ The external IDE cdrom drive I have works fine, so I'm assuming it's not a generic cd problem and the scsi cdrom drive works fine with windows 98 :/ Anyone else had this working ? P. options SCSI_DELAY=8000 #Be pessimistic about Joe SCSI device controller aic0 at isa? port ? cam irq ? disable controller scbus0 device da0 #SCSI direct access devices (aka disks) device sa0 #SCSI tapes device pass0 #CAM passthrough driver device cd0 #Only need one of these, the code dynamically grows device pt0 at scbus? # SCSI processor type Card inserted, slot 0 Feb 6 00:00:13 disapp pccardd[81]: Card "Adaptec, Inc."("APA-1460 SCSI Host Adapter") [Version 0.01] [(null)] matched "Adaptec, Inc\." ("APA-1460.*") [(null)] [(null)] card0: assign aic0 iobase 0x340 irq 7 aic0: aic6360, dma, disconnection, parity check da0 at aic0 bus 0 target 3 lun 0 da0: <SEAGATE ST31200N 8648> Fixed Direct Access SCSI-2 device da0: 5.000MB/s transfers (5.000MHz, offset 8), Tagged Queueing Enabled da0: 1006MB (2061108 512 byte sectors: 64H 32S/T 1006C) pir@disapp# mount /dev/da0s1e /mnt pir@disapp# df /mnt Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/da0s1e 998367 700337 218161 76% /mnt pir@disapp# ls -aFl /mnt total 700338 drwxr-xr-x 2 root wheel 512 Feb 5 18:09 ./ drwxr-xr-x 22 root wheel 512 Feb 6 00:00 ../ -rw------- 1 root wheel 39413760 Feb 5 17:48 disapp..dump -rw------- 1 root wheel 645324800 Feb 5 18:09 disapp.usr.dump -rw------- 1 root wheel 32010240 Feb 5 18:09 disapp.var.dump pir@disapp# umount /mnt <eject card> <move to scsi cdrom drive> <insert card> [...] cd0 at aic0 bus 0 target 6 lun 0 cd0: <TOSHIBA XM5701TASUN12XCD 0997> Removable CD-ROM SCSI-2 device cd0: 5.000MB/s transfers (5.000MHz, offset 8) cd0: cd present [1318424 x 512 byte records] pir@disapp# mount_cd9660 /dev/cd0a /mnt mount_cd9660: Device not configured pir@disapp# cdcontrol -f /dev/cd0a eject cdcontrol: no disc in drive /dev/cd0a pir@disapp# mount_cd9660 /dev/cd0c /mnt mount_cd9660: Device not configured pir@disapp# cdcontrol -f /dev/cd0c eject cdcontrol: no disc in drive /dev/cd0a -- pir pir@pir.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000207175326.G9141>