Date: Fri, 6 Oct 2000 02:39:54 +0200 From: Martin Welk <mw@theatre.sax.de> To: Kent Berggren <kenta@sr.se> Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Thinkpad 600x and com-ports Message-ID: <20001006023954.A32558@theatre.lan> In-Reply-To: <Pine.LNX.3.95.1001004114931.8490H-100000@aramis.sr.se>; from kenta@sr.se on Wed, Oct 04, 2000 at 11:53:56AM %2B0000 References: <Pine.LNX.3.95.1001004114931.8490H-100000@aramis.sr.se>
index | next in thread | previous in thread | raw e-mail
On Wed, Oct 04, 2000 at 11:53:56AM +0000, Kent Berggren wrote:
> I have a Thinkpad 600x.
I have a TP600E, but this should be the same on the 600X from what I have
seen so far.
> When I boot (FreeBSD) the pc it turns off the power for the rs232 port.
>
> I have run all things from dos. ps2 ..and so on. It do not help me.
>
> Is there a way of geting whe power on from FreeBSD.
>
> There are a linux program called tpctl but it can not turn the power on.
> :-(
Unfortunately, there's no FreeBSD port of the ThinkPad Configuration
Utility, which is available for Windoze and for Linux. With this software,
you can configure your peripheral settings and activate & deactivate
components.
First of all, you cannot use IrDA and the serial port at the same time. If
you have IrDA turned on and want to use serial, it's a workaround to turn
off the infrared port first, than reboot, than turn on the serial port.
I switched from IrDA to serial some days ago and it was a pain as I had to
try it several times until it was working, and nobody knows why... :-(
Regards,
Martin
--
,,Oh, there's a lot of opportunities, if you're knowing to take them,
you know, there's a lot of opportunities, if there aren't
you can make them, make or break them!'' (Tennant/Lowe)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001006023954.A32558>