Date: Wed, 3 Mar 2004 13:13:05 +0300 From: Odhiambo Washington <wash@wananchi.com> To: freebsd-questions@freebsd.org Subject: UPDATING 5.1-REL Message-ID: <20040303101305.GE15037@ns2.wananchi.com>
next in thread | raw e-mail | index | archive | help
--82I3+IH0IqGh5yIs
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi folks,
I have a machine, with very good specs (2.8GHz, 512MB RAM) and it's
running 5.1-REL.
FreeBSD 5.1-RELEASE-p10 #2: Mon Dec 22 10:19:56 EAT 2003
I's like to upgrade this box to 5.2.1-REL. I have cvsupped very clean
sources. However, make buildworld dies at different stages.
There is no consistent point at which it fails. Everytime I try, it goes
and fails later, at a different stage:
In the logs, I see things like:
pid 21191 (make), uid 0: exited on signal 4 (core dumped)
pid 61014 (make), uid 0: exited on signal 10 (core dumped)
Attached is a dmesg output.
Any pointers are welcome.
NB: I have successfully upgraded other 5.1 boxes, so I'm familiar with
the process.
-Wash
http://www.netmeister.org/news/learn2quote.html
--
+======================================================================+
|\ _,,,---,,_ | Odhiambo Washington <wash@wananchi.com>
Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com
|,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922
'---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121
+======================================================================+
Nothing is illegal if one hundred businessmen decide to do it.
-- Andrew Young
--82I3+IH0IqGh5yIs
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.uhmc.txt"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE-p10 #2: Mon Dec 22 10:19:56 EAT 2003
root@gw.uhmc.co.ke:/usr/obj/usr/src/sys/FREEBEAST
Preloaded elf kernel "/boot/kernel/kernel" at 0xc05cf000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05cf244.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2790723088 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2790.72-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 268410880 (255 MB)
avail memory = 254259200 (242 MB)
netsmb_dev: loaded
Pentium Pro MTRR support enabled
VESA: v2.0, 8128k memory, flags:0x0, mode table:0xc04dc0e2 (1000022)
VESA: ATI MACH64
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ D12 > on motherboard
ACPI-0629: *** Info: There are no GPE blocks defined in the FADT
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
pcibios: BIOS version 2.10
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
ahc0: <Adaptec (Compaq OEM) 29160 Ultra160 SCSI adapter> port 0x2400-0x24ff mem 0xf7ff0000-0xf7ff0fff irq 5 at device 1.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
bge0: <Broadcom BCM5702X Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7fe0000-0xf7feffff irq 10 at device 3.0 on pci0
bge0: Ethernet address: 00:0b:cd:cf:74:83
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
pci0: <display, VGA> at device 4.0 (no driver attached)
pci0: <base peripheral> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB6 UDMA100 controller> port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xf5fd0000-0xf5fd0fff irq 11 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
ppc0 port 0x778-0x77d,0x378-0x37f irq 7 drq 0 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROMs> at iomem 0xee000-0xeffff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
BRIDGE 020214 loaded
DUMMYNET initialized (011031)
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
acd0: CDROM <LTN486S> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <COMPAQ BD03695A27 HPB4> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C)
Mounting root from ufs:/dev/da0s1a
--82I3+IH0IqGh5yIs--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040303101305.GE15037>