Date: Thu, 7 Oct 2004 12:24:45 +0200 (CEST) From: "O. Hartmann" <hartmann@edda.physik.uni-mainz.de> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/72416: FreeBSD 5.3-BETA7: The alternate systemclock has died. Reverting to "pigs" dislpay Message-ID: <200410071024.i97AOj01002574@edda.physik.uni-mainz.de> Resent-Message-ID: <200410071030.i97AUOJ6015760@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 72416 >Category: i386 >Synopsis: FreeBSD 5.3-BETA7: The alternate systemclock has died. Reverting to "pigs" dislpay >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Oct 07 10:30:23 GMT 2004 >Closed-Date: >Last-Modified: >Originator: O. Hartmann >Release: FreeBSD 5.3-BETA7 i386 >Organization: Department of Geophysics, Johannes Gutenberg-Universitaet Mainz >Environment: System: FreeBSD edda.physik.uni-mainz.de 5.3-BETA7 FreeBSD 5.3-BETA7 #10: Wed Oct 6 17:17:42 UTC 2004 root@edda.physik.uni-mainz.de:/usr/obj/usr/src/sys/EDDA i386 Kernel: SMP, SCHED_4BSD, PREEMPTION, APIC MainPCB: ASUS CUR-DSL with two P3 866Mhz >Description: While compiling world and kernel and doing a lot of data manipulating in ImageMagick with big highres maps I tried to use 'systat 1 -vmstat'. After a while of showing only the unfilled 'formula' of the systat screen systat exits with a error: "The alternate systemclock has died. Reverting to "pigs" display". System is a SMP machine with PREEMPTION and SCVHED_4BSD enabled in kernel, based on a ASUS CUR-DSL main PCB with two P3 866 Mhz, both enabled. I append dmesg output. Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA7 #10: Wed Oct 6 17:17:42 UTC 2004 root@edda.physik.uni-mainz.de:/usr/obj/usr/src/sys/EDDA ACPI APIC Table: <ASUS CUR-DLS > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (866.70-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 1073721344 (1023 MB) avail memory = 1041166336 (992 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 3 cpu1 (AP): APIC ID: 0 ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard netsmb_dev: loaded npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS CUR-DLS> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xfd800000-0xfd8fffff,0xfe000000-0xfe000fff irq 20 at device 2.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:e0:18:05:73:f4 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd400-0xd4ff mem 0xfd000000-0xfd000fff irq 17 at device 4.0 on pci0 ahc0: [GIANT-LOCKED] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs pcm0: <AudioPCI ES1373-8> port 0xd000-0xd03f irq 19 at device 6.0 on pci0 pcm0: <Cirrus Logic CS4297A AC97 Codec> pcm0: [GIANT-LOCKED] pci0: <display, VGA> at device 7.0 (no driver attached) isab0: <PCI-ISA bridge> port 0xe800-0xe80f at device 15.0 on pci0 isa0: <ISA bus> on isab0 pci0: <mass storage, ATA> at device 15.1 (no driver attached) pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xb000-0xb03f mem 0xfa800000-0xfa81ffff irq 22 at device 3.0 on pci1 em0: Ethernet address: 00:07:e9:14:8f:7b em0: Speed:N/A Duplex:N/A sym0: <1010-33> port 0xa800-0xa8ff mem 0xf9800000-0xf9801fff,0xfa000000-0xfa0003ff irq 24 at device 5.0 on pci1 sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: [GIANT-LOCKED] sym1: <1010-33> port 0xa400-0xa4ff mem 0xf8800000-0xf8801fff,0xf9000000-0xf90003ff irq 25 at device 5.1 on pci1 sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. sym1: [GIANT-LOCKED] atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xca7ff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <8 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0 at vga0 Timecounters tick every 1.000 msec IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. sa0 at ahc0 bus 0 target 5 lun 0 sa0: <HP C1533A 9503> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 8) cd0 at ahc0 bus 0 target 0 lun 0 cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: cd present [324060 x 2048 byte records] da0 at sym0 bus 0 target 0 lun 0 da0: <IBM IC35L018UWD210-0 S5BS> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da1 at sym0 bus 0 target 1 lun 0 da1: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device da1: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da2 at sym0 bus 0 target 2 lun 0 da2: <FUJITSU MAJ3182MP 5207> Fixed Direct Access SCSI-3 device da2: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled da2: 17429MB (35694904 512 byte sectors: 255H 63S/T 2221C) SMP: AP CPU #1 Launched! cd1 at ahc0 bus 0 target 1 lun 0 cd1: <PLEXTOR CD-R PX-R412C 1.07> Removable CD-ROM SCSI-2 device cd1: 10.000MB/s transfers (10.000MHz, offset 8) cd1: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/da0s1a pid 73819: corrected slot count (3->1) >How-To-Repeat: Do compiling and additionaly a lot of memory and hard disk intensive work and try to start systat with option vmstat >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200410071024.i97AOj01002574>