Date: Fri, 8 Jul 2011 21:31:03 +0300 From: George Liaskos <geo.liaskos@gmail.com> To: Kostik Belousov <kostikbel@gmail.com> Cc: x11@freebsd.org Subject: Re: Intel GPU kernel driver Message-ID: <CANcjpOAXXLDGu9z=PwZhX7=7t0qJOwnvbRj-8a_BL8nTqUrj4g@mail.gmail.com> In-Reply-To: <20110708182040.GC48734@deviant.kiev.zoral.com.ua> References: <20110630162315.GV48734@deviant.kiev.zoral.com.ua> <CANcjpOD_LM=uT%2BrPW=9-WTrRVjJOh7cGuenXi0-tTsKdyCbC=Q@mail.gmail.com> <20110708092039.GL48734@deviant.kiev.zoral.com.ua> <20110708110243.GT48734@deviant.kiev.zoral.com.ua> <CANcjpOCSzSAeNKVG82PawMif7dqxn0f8Qy7w41PAJfEWcTBxVA@mail.gmail.com> <20110708182040.GC48734@deviant.kiev.zoral.com.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jul 8, 2011 at 9:20 PM, Kostik Belousov <kostikbel@gmail.com> wrote: > On Fri, Jul 08, 2011 at 09:12:18PM +0300, George Liaskos wrote: >> > Please use all.3.7.patch. >> >> No errors with 3.7, only screen corruption :) >> >> dmesg: http://pastebin.com/TT5iSqn7 >> screens: http://imgur.com/a/VDXkw#nUua3 > > What version of ddx driver do you use ? > Show me the kernel messages with drm.debug tunable set to 0x2. > I.e. do "kenv drm.debug=2", before loading i915.ko. Then show > dmesg collected after X is started. > drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0 info: [drm] MSI enabled 1 message(s) info: [drm] AGP at 0xd0000000 256MB intel_gmbus0 on drm0 intel_iicbb0 on drm0 intel_ddc_port0 on intel_gmbus0 intel_gmbus1 on drm0 intel_iicbb1 on drm0 intel_ddc_port1 on intel_gmbus1 intel_gmbus2 on drm0 intel_iicbb2 on drm0 intel_ddc_port2 on intel_gmbus2 intel_gmbus3 on drm0 intel_iicbb3 on drm0 intel_ddc_port3 on intel_gmbus3 intel_gmbus4 on drm0 intel_iicbb4 on drm0 intel_ddc_port4 on intel_gmbus4 intel_gmbus5 on drm0 intel_iicbb5 on drm0 intel_ddc_port5 on intel_gmbus5 intel_gmbus6 on drm0 intel_iicbb6 on drm0 intel_ddc_port6 on intel_gmbus6 intel_gmbus7 on drm0 intel_iicbb7 on drm0 intel_ddc_port7 on intel_gmbus7 info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. [drm:KMS:pid2624:intel_detect_pch] No PCH detected [drm:KMS:pid2624:parse_general_definitions] crt_ddc_bus_pin: 2 [drm:KMS:pid2624:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 0:"1680x1050" 0 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x8 0xa [drm:KMS:pid2624:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [drm:KMS:pid2624:parse_sdvo_device_mapping] No SDVO device info is found in VBT [drm:KMS:pid2624:intel_modeset_init] 2 display pipes available. [drm:KMS:pid2624:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 0 [drm:KMS:pid2624:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 0 [drm:KMS:pid2624:intel_setup_outputs] probing DP_D [drm:KMS:pid2624:intel_dp_i2c_init] i2c_init DPDDC-D [drm:KMS:pid2624:intel_tv_init] Integrated TV is not present. [drm:KMS:pid2624:intel_update_fbc] [drm:KMS:pid2624:intel_update_fbc] no output, disabling [drm:KMS:pid2624:g4x_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [drm:KMS:pid2624:intel_update_fbc] [drm:KMS:pid2624:intel_update_fbc] no output, disabling [drm:KMS:pid2624:g4x_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 drm0: taking over the fictitious range 0xd0000000-0xe0000000 info: [drm] Initialized i915 1.6.0 20080730 [drm:KMS:pid2624:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [drm:KMS:pid2624:drm_mode_getresources] [CRTC:3] [drm:KMS:pid2624:drm_mode_getresources] [CRTC:4] [drm:KMS:pid2624:drm_mode_getresources] [ENCODER:6:LVDS-6] [drm:KMS:pid2624:drm_mode_getresources] [ENCODER:13:DAC-13] [drm:KMS:pid2624:drm_mode_getresources] [ENCODER:15:TMDS-15] [drm:KMS:pid2624:drm_mode_getresources] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2624:drm_mode_getresources] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:drm_mode_getresources] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 18:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 19:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 18:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 19:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid2624:drm_mode_addfb] [FB:8] [drm:KMS:pid2624:drm_mode_setcrtc] [CRTC:4] [drm:KMS:pid2624:drm_mode_setcrtc] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2624:drm_crtc_helper_set_config] [drm:KMS:pid2624:drm_crtc_helper_set_config] [CRTC:4] [FB:8] #connectors=1 (x y) (0 0) [drm:KMS:pid2624:drm_crtc_helper_set_config] crtc has no fb, full mode set [drm:KMS:pid2624:drm_crtc_helper_set_config] modes are different, full mode set [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 9:"1680x1050" 0 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x0 0xa [drm:KMS:pid2624:drm_crtc_helper_set_config] encoder changed, full mode switch [drm:KMS:pid2624:drm_crtc_helper_set_config] crtc changed, full mode switch [drm:KMS:pid2624:drm_crtc_helper_set_config] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:KMS:pid2624:drm_crtc_helper_set_config] attempting to set mode from userspace [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 9:"1680x1050" 0 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x0 0xa [drm:KMS:pid2624:drm_crtc_helper_set_mode] [CRTC:4] [drm:KMS:pid2624:i9xx_crtc_mode_set] using SSC reference clock of 100 MHz [drm:KMS:pid2624:i9xx_crtc_mode_set] Mode for pipe B: [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 9:"1680x1050" 0 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x0 0xa [drm:KMS:pid2624:i9xx_crtc_mode_set] disabling CxSR downclocking [drm:KMS:pid2624:intel_pipe_set_base_atomic] Writing base 00042000 00000000 0 0 7168 [drm:KMS:pid2624:intel_update_fbc] [drm:KMS:pid2624:intel_update_fbc] fbc disabled per module param (default off) [drm:KMS:pid2624:g4x_check_srwm] SR watermark: display plane 93, cursor 6 [drm:KMS:pid2624:g4x_check_srwm] display watermark is too large(93/63), disabling [drm:KMS:pid2624:g4x_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=40, cursor=6, SR: plane=93, cursor=6 [drm:KMS:pid2624:drm_crtc_helper_set_mode] [ENCODER:6:LVDS-6] set [MODE:9:1680x1050] [drm:KMS:pid2624:g4x_check_srwm] SR watermark: display plane 93, cursor 6 [drm:KMS:pid2624:g4x_check_srwm] display watermark is too large(93/63), disabling [drm:KMS:pid2624:g4x_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=40, cursor=6, SR: plane=93, cursor=6 [drm:KMS:pid2624:intel_update_fbc] [drm:KMS:pid2624:intel_update_fbc] fbc disabled per module param (default off) [drm:KMS:pid2624:drm_crtc_helper_set_config] Setting connector DPMS state to on [drm:KMS:pid2624:drm_crtc_helper_set_config] [CONNECTOR:5:LVDS-1] set DPMS on [drm:KMS:pid2624:intel_crtc_cursor_set] [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 18:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 19:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 18:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 19:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 18:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 19:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 18:"1680x1050" 60 120600 1680 1712 1760 1888 1050 1051 1054 1065 0x48 0xa [drm:KMS:pid2624:drm_mode_debug_printmodeline] Modeline 19:"1680x1050" 50 100530 1680 1712 1760 1888 1050 1051 1054 1065 0x40 0xa [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2624:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid2624:drm_mode_getconnector] [CONNECTOR:14:?] [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] [drm:KMS:pid2624:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid2624:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected [drm:KMS:pid0:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid0:output_poll_execute] [CONNECTOR:12:VGA-1] status updated from 2 to 2 [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x51450085 [drm:KMS:pid0:output_poll_execute] [CONNECTOR:14:DP-1] status updated from 2 to 2
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CANcjpOAXXLDGu9z=PwZhX7=7t0qJOwnvbRj-8a_BL8nTqUrj4g>