Date: Sun, 8 Jul 2007 16:35:02 GMT From: Steven Friedrich <StevenFriedrich@InsightBB.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/114406: ATI Radeon Mobility X600 not supported by agp device driver Message-ID: <200707081635.l68GZ2No090205@www.freebsd.org> Resent-Message-ID: <200707081640.l68Ge4Nl052003@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 114406 >Category: kern >Synopsis: ATI Radeon Mobility X600 not supported by agp device driver >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Jul 08 16:40:04 GMT 2007 >Closed-Date: >Last-Modified: >Originator: Steven Friedrich >Release: 6.2-RELEASE >Organization: >Environment: FreeBSD laptop.StevenFriedrich.org 6.2-RELEASE FreeBSD 6.2-RELEASE #71: Sat Feb 17 14:54:58 EST 2007 root@laptop.StevenFriedrich.org:/usr/obj/usr/src/sys/LAPTOP i386 >Description: While troubleshooting a DRI issue, I was following the steps at http://dri.freedesktop.org/wiki/DriTroubleshooting. dmesg | grep -i agp returned nothing. I have device agp in my kernel conf. Here's my dmesg: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #71: Sat Feb 17 14:54:58 EST 2007 root@laptop.StevenFriedrich.org:/usr/obj/usr/src/sys/LAPTOP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>> AMD Features=0x20100000<NX,LM> Logical CPUs per core: 2 real memory = 535756800 (510 MB) avail memory = 514760704 (490 MB) ACPI APIC Table: <HP 3082 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <HP 3082> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x38c0-0x38df irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x38e0-0x38ff irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x3c00-0x3c1f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xc8000000-0xc80003ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib3 cbb0: <PCI-CardBus Bridge> at device 0.0 on pci11 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <1394 Open Host Controller Interface> mem 0xc8208000-0xc82087ff,0xc8200000-0xc8203fff irq 22 at device 0.2 on pci11 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 08:00:28:56:00:0d:3d:b1 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 0a:00:28:0d:3d:b1 fwe0: Ethernet address: 0a:00:28:0d:3d:b1 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=2, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fwohci0: phy int pci11: <mass storage> at device 0.3 (no driver attached) pci11: <base peripheral> at device 0.4 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0x5000-0x50ff mem 0xc8209400-0xc82094ff irq 20 at device 2.0 on pci11 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:c0:9f:fb:46:48 ndis0: <Broadcom 802.11b/g WLAN> mem 0xc8206000-0xc8207fff irq 17 at device 3.0 on pci11 ndis0: NDIS API version: 5.1 ndis0: Ethernet address: 00:14:a5:2a:a5:db pcm0: <Intel ICH6 (82801FB)> port 0x3000-0x30ff,0x3880-0x38bf mem 0xc8000800-0xc80009ff,0xc8000400-0xc80004ff irq 22 at device 30.2 on pci0 pcm0: <Conexant CX20468-21 AC97 Codec> pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3c40-0x3c4f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 speaker0: <PC speaker> port 0x61 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xdb000-0xdbfff,0xdc000-0xdffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad0: 76319MB <Seagate ST9808211A 3.02> at ata0-master UDMA100 acd0: DVDR <HL-DT-ST DVD-RW GWA-4082N/CC15> at ata0-slave PIO4 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s2a Here's my scanpci: pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x2580 Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x8086 device 0x2581 Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port pci bus 0x0000 cardnum 0x1c function 0x00: vendor 0x8086 device 0x2660 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 pci bus 0x0000 cardnum 0x1d function 0x00: vendor 0x8086 device 0x2658 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 pci bus 0x0000 cardnum 0x1d function 0x01: vendor 0x8086 device 0x2659 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 pci bus 0x0000 cardnum 0x1d function 0x02: vendor 0x8086 device 0x265a Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 pci bus 0x0000 cardnum 0x1d function 0x03: vendor 0x8086 device 0x265b Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 pci bus 0x0000 cardnum 0x1d function 0x07: vendor 0x8086 device 0x265c Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller pci bus 0x0000 cardnum 0x1e function 0x00: vendor 0x8086 device 0x244e Intel Corporation 82801 PCI Bridge pci bus 0x0000 cardnum 0x1e function 0x02: vendor 0x8086 device 0x266e Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller pci bus 0x0000 cardnum 0x1e function 0x03: vendor 0x8086 device 0x266d Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller pci bus 0x0000 cardnum 0x1f function 0x00: vendor 0x8086 device 0x2640 Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge pci bus 0x0000 cardnum 0x1f function 0x01: vendor 0x8086 device 0x266f Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller pci bus 0x0000 cardnum 0x1f function 0x03: vendor 0x8086 device 0x266a Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x1002 device 0x3150 ATI Technologies Inc M24 1P [Radeon Mobility X600] pci bus 0x000b cardnum 0x00 function 0x00: vendor 0x104c device 0x8031 Texas Instruments PCIxx21/x515 Cardbus Controller pci bus 0x000b cardnum 0x00 function 0x02: vendor 0x104c device 0x8032 Texas Instruments OHCI Compliant IEEE 1394 Host Controller pci bus 0x000b cardnum 0x00 function 0x03: vendor 0x104c device 0x8033 Texas Instruments PCIxx21 Integrated FlashMedia Controller pci bus 0x000b cardnum 0x00 function 0x04: vendor 0x104c device 0x8034 Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller pci bus 0x000b cardnum 0x02 function 0x00: vendor 0x10ec device 0x8139 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ pci bus 0x000b cardnum 0x03 function 0x00: vendor 0x14e4 device 0x4318 Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200707081635.l68GZ2No090205>