Date: Mon, 7 Jan 2019 22:23:58 -0800 From: Marcel Flores <marcel@brickporch.com> To: freebsd-arm@freebsd.org Subject: Re: Booting 12.0 on Cavium ThunderX Message-ID: <D2EF2FC9-6B9C-4582-B7B2-C6F6EDADADAB@brickporch.com>
next in thread | raw e-mail | index | archive | help
> Booting 12.0-RC3 (RC2 as well) seems to hang on Cavium ThunderX boot = after boot menu, but no trouble with 11.2. Kind of feels like EFI = console setting issue, but I not sure where else to dig - settings seem = to approximately match 11.2. >=20 > Loading kernel... > /boot/kernel/kernel text=3D0x89ee20 data=3D0x1767f8+0x7996d4 = syms=3D[0x8+0x1166a0+0x8+0x10b07c] > Loading configured modules... > can't find '/boot/entropy' > Using DTB provided by EFI at 0x3fd7ec018. > EFI framebuffer information: > addr, size 0x10000000, 0x12c000 > dimensions 640 x 480 > stride 640 > masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 > BgxStopPollForLink <<>> > BGX0 LMAC: 0 BgxEnableRxTx(DISABLE) > BGX0 LMAC: 0 BgxEnableRxTx: BGX_CMRX_CFG=3D0x8300 > BGX0 LMAC: 1 BgxEnableRxTx(DISABLE) > BGX0 LMAC: 1 BgxEnableRxTx: BGX_CMRX_CFG=3D0x8301 > BGX0 LMAC: 2 BgxEnableRxTx(DISABLE) > BGX0 LMAC: 2 BgxEnableRxTx: BGX_CMRX_CFG=3D0x8302 > BGX0 LMAC: 3 BgxEnableRxTx(DISABLE) > BGX0 LMAC: 3 BgxEnableRxTx: BGX_CMRX_CFG=3D0x8303 > BGX1 LMAC: 0 BgxEnableRxTx(DISABLE) > BGX1 LMAC: 0 BgxEnableRxTx: BGX_CMRX_CFG=3D0x84E4 > OSBootEvent status : 0, ResponseData[0] =3D D1, [1] =3D 0, [2] =3D = 0, [3] =3D 0, [4] =3D 0=20 > Entered .... EfiSelReportStatusCode Value: 3101019=20 Still no luck getting the ThunderX to boot anything after 11.2. Both = 12-Release and 13-Current exhibit the same behavior: it reaches = loader.efi, says it loads the kernel, but then nothing =E2=80=94 just = hangs. Identical behavior across all boot media (PXE, USB, SATA, not = surprising, since it reaches the loader fine). The board itself is the MT30-GS2, up-to-date firmware and BIOS (ThunderX = has been quite for a bit). Any thoughts? I=E2=80=99ve twiddled kernel options and configurations, = but nothing seems to make it budge. -m=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?D2EF2FC9-6B9C-4582-B7B2-C6F6EDADADAB>