Date: Thu, 28 May 1998 18:25:01 +0200 From: Harold Gutch <logix@foobar.franken.de> To: freebsd-isdn@FreeBSD.ORG Subject: Re: i4b not working Message-ID: <19980528182501.41880@foobar.franken.de> In-Reply-To: <19980528151603.23028@foobar.franken.de>; from Harold Gutch on Thu, May 28, 1998 at 03:16:03PM %2B0200 References: <19980528151603.23028@foobar.franken.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, May 28, 1998 at 03:16:03PM +0200, Harold Gutch wrote:
> installing isdn4bsd worked without the slightest problem for me,
> as did the compiling of the new kernel.
>
> The kernel now finds my ISDN-card:
>
> isic0 at 0xd80 irq 5 maddr 0xd0000 msize 4096 flags 0x2 on isa
> isic0: Teles S0/16, Creatix ISDN S0-16 or Niccy 1016
> isic0: ISAC 2085 Version V2.3 (B3) (IOM-1) (Addr=0xf00d0100)
> isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0xf00d0180,
> AddrB=0xf00d01c0)
> [...]
> i4b: ISDN call control device attached
> i4bisppp: 4 ISDN SyncPPP device(s) attached
> i4bctl: ISDN system control port attached
> i4bipr: 4 IP over raw HDLC ISDN device(s) attached
> i4btel: 2 ISDN telephony interface device(s) attached
> i4brbch: 4 raw B channel access device(s) attached
> i4btrc: 4 ISDN trace device(s) attached
>
> After playing around a little i found out what /etc/rc.isdn,
> /etc/isdn/isdnd.rc etc. were good for - but i still am not able
> to dial out or receive incoming calls. Not even isdntest works:
>
> root@foobar:~ # /usr/src/i4b/isdntest/isdntest -c 0 -i 12345
> -o 98765
> isdntest: accepting calls from telephone number [12345]
> isdntest: calling out telephone number [98765]
> isdntest: got cdid 46 from kernel
> isdntest: calling out to telephone number [98765]
> isdntest: incoming disconnect indication, cdid 46, cause 0
>
> (using real phonenumbers of course - which i tried with and
> without the city code, neither worked)
>
> perhaps the following error messages will help:
>
> /kernel: i4b-L2-i4b_mdl_error_ind: unit = 0, location = F_AE11
> /kernel: i4b-L2-i4b_mdl_error_ind: error = MDL_ERR_G: unsuccessful
> transmission N200times - SABME
>
> (which btw is exactly the same errormsg i get when configuring
> isppp0 using ifconfig while isdnd is running)
>
> I dont know wether isdntrace-logs will provide any more
> debugging-help, and I dont really know how to cut out the really
> relevant information either, but I of course could provide a
> complete isdntrace-log of this time-frame.
>
> I still have another ISDN-card, the Teledat 100, but i dont know
> what cards it is compatible to, if any, so i dont know if i could
> try using that card instead of the Creatix card.
>
> Oh, btw, i have a running modem-connection using pppd when
> testing isdn4bsd - but i dont think that might make any problems,
> or did i perhaps discover some bug ? :)
>
Ok, after doing a few tests, i found out the following:
If i shutdown my modem-connection, kill pppd etc., i in fact can
dial-out (I only tested it with isdntest). I discovered that i
was able to call another of my MSNs, but i guess it should make
no difference wether i call one of my MSNs or any other
"external" number.
That was where the next problems arose :).
When starting isdntest the first time my phone rang very shortly
(~0.3s) and i got a bunch of errormsgs:
/kernel: i4b-L2-i4b_tei_assign: tx TEI ID_Request
/kernel: i4b-L2-i4b_tei_rx_frame: TEI ID Assign - TEI = 65
/kernel: i4b-L4-i4b_l4_setup_timeout: 896369451: ERROR: idletime[536961280]+earlyhup[-272638980] >
unitlength[11781]!
I then started isdntest a second time directly afterwards. Now my
phone rang longer, i got more errormsgs ending with a message on
the screen asking me to press a key to reboot, which i did.
Some time during the bootup-sequence (i guess when probing isic0)
the ringing of my phone stopped.
Here are the errormsgs i got:
/kernel: i4b-L2-i4b_i_frame_queued_up: V(S) == ((V(A) + k) & 127)!
/kernel: i4b-L2-i4b_i_frame_queued_up: state = ST_TIMREC
/kernel: i4b-L2-i4b_print_l2var: unit0 V(R)=3, V(S)=4, V(A)=3,ACKP=0,PBSY=0,OBSY=0
/kernel: i4b-L2-i4b_invoke_retransmission: nr = 4
/kernel: i4b-L2-i4b_i_frame_queued_up: V(S) == ((V(A) + k) & 127)!
/kernel: i4b-L2-i4b_i_frame_queued_up: state = ST_MULTIFR
/kernel: i4b-L2-i4b_print_l2var: unit0 V(R)=5, V(S)=5, V(A)=4,ACKP=0,PBSY=0,OBSY=0
/kernel: i4b-L3-i4b_decode_q931: cannot find calldescriptor for cr = 0xa, crflag = 0x1, msg = 0x4d,
frame = 0x4d 0x1c 0x15 0x91 0xa1 0x12 0x2 0x2 0x3f 0x5f 0x2 0x1 0x24 0x30 0x9 0x30 0x7 0xa1 0x5
0x30 0x3 0x2 0x1 0x1
/kernel: i4b-L3-T308_timeout: REL not answered, cr = 1
/kernel: i4b-L3-next_l3state: FSM illegal state, state = ST_U12 - Disc Ind, event = EV_T308EXP - T308
timeout!
/kernel: i4b-L3-i4b_l3_tx_status: tx STATUS for cr 1
/kernel: i4b-L2-i4b_i_frame_queued_up: V(S) == ((V(A) + k) & 127)!
/kernel: i4b-L2-i4b_i_frame_queued_up: state = ST_MULTIFR
The next time i tried it, i got the following errors (i am sorry,
but i dont know exactly when i got them - this happened when
starting isdntest, perhaps for the first time after the reboot,
perhaps for the second time):
/kernel: i4b-L2-i4b_tei_assign: tx TEI ID_Request
/kernel: i4b-L1-timer3_expired: state = F4 Awaiting Signal
/kernel: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3
/kernel: i4b-L2-i4b_tei_assign: tx TEI ID_Request
/kernel: i4b-L1-ph_data_req: still in state F3!
/kernel: i4b-L1-timer3_expired: state = F4 Awaiting Signal
/kernel: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3
/kernel: i4b-L2-i4b_tei_assign: tx TEI ID_Request
/kernel: i4b-L1-ph_data_req: still in state F3!
/kernel: i4b-L1-ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal
/kernel: i4b-L3-T303_timeout: SETUP not answered, cr = 19
/kernel: i4b-L3-next_l3state: FSM illegal state, state = ST_OW - Out Wait EST,
event = EV_T303EXP - T303 timeout!
And the following 5 msgs were repeated once every 2 seconds until
i pressed a key to reboot:
/kernel: i4b-L1-timer3_expired: state = F4 Awaiting Signal
/kernel: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3
/kernel: i4b-L2-i4b_tei_assign: tx TEI ID_Request
/kernel: i4b-L1-ph_data_req: still in state F3!
/kernel: i4b-L1-ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal
Note that this only occured when my ppp-line was down ! When it
was up, I got the errormsgs mentioned above (i4b-L2-i4b_mdl_error_ind).
I forgot mentioning in my first mail that i am using FreeBSD 2.2.6
and isdn4bsd 0.61 alpha-220598.
I am sorry if i flooded this list with useless information, but I
considered (at least parts of it) to perhaps be useful for
general i4b-debugging, like for example the non-working together
with pppd.
--
bye, logix
<Shabby> Sleep is an abstinence syndrome wich accurs due to lack of coffein.
Wed Mar 4 04:53:33 CET 1998 #unix, ircnet
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980528182501.41880>