Date: Thu, 25 May 2000 02:42:38 +0900 From: itojun@iijlab.net To: David Harmelin <david.harmelin@dante.org.uk> Cc: freebsd-net@freebsd.org Subject: Re: nd6_lookup: failed to add route for neighbor Message-ID: <1841.959190158@coconut.itojun.org> In-Reply-To: david.harmelin's message of Wed, 24 May 2000 17:16:42 %2B0100. <4.2.2.20000524170030.00b0f100@alpha.dante.org.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
>I'll try to make it as brief as possible. >I have a Freebsd 4.0 connected through a v6-on-v4 tunnel to a remote >router. The gif0 tunnel works fine (can ping the other v6 end). >My local v6 address is 3ffe:8038:80:3::3, configured on the fxp1 (ethernet) >interface, the other end is 3ffe:8038:80:3::2 . is the following diagram correct? if so, do not configure 3ffe:8038:80:3::3 onto fxp1. configure the address to gif0, not fxp1. you are not supposed to use 3ffe:8038:80:3::/64 on fxp1. the other end of tunnel | 3ffe:8038:80:3::2 | | tunnel link | |gif0 3ffe:8038:80:3::3 my end of tunnel |fxp1 ==+=== ethernet >There is no autoconfiguration so I edited /etc/rc.conf so that >/etc/rc.network6 adds the local address it gets from there. >When I originally booted the station, netstat -rn output was: >3ffe:8038:80:3::/64 link#2 UGSc fxp1 >What adds this line? could not find it in rc.network6 ifconfig to fxp1. >My second question is: what link#2 stands for? fxp1. itojun To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1841.959190158>