Date: Sat, 16 Aug 2003 23:49:06 +0300 From: Tomi Vainio - Sun Finland <Tomi.Vainio@Sun.COM> To: freebsd-current@freebsd.org, freebsd-multimedia@freebsd.org Subject: Fxtv DGA mode doesn't work anymore Message-ID: <16190.39106.54098.485474@ultrahot.finland.sun.com>
next in thread | raw e-mail | index | archive | help
Something has changed during last week because my Fxtv stopped working
in DGA mode. I'm back running old kernel so any clues what might
cause this?
Tomppa
FreeBSD 5.1-CURRENT #3: Sun Aug 10 00:57:18 EEST 2003
FreeBSD 5.1-CURRENT #4: Sat Aug 16 21:17:19 EEST 2003
***clip clip***
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #3: Sun Aug 10 00:57:18 EEST 2003
tomppa@cat.bert.sun.fi:/u/F/local/sup/5.0/sys/i386/compile/CAT
acpi_alloc_wakeup_handler: unable to allocate wake memory
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc053a000.
Calibrating clock(s) ... i8254 clock: 1193190 Hz
Timecounter "i8254" frequency 1193190 Hz
Calibrating TSC clock ... TSC clock: 400913881 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x653 Stepping = 3
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000564000 - 0x000000001f6b1fff, 521461760 bytes (127310 pages)
avail memory = 514416640 (490 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fdb60
bios32: Entry = 0xfdb70 (c00fdb70) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb91
pnpbios: Found PnP BIOS data at 0xc00f7a30
pnpbios: Entry = f0000:74be Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
acpi0: <AMIINT > on motherboard
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
Timecounter "ACPI-safe" frequency 3579545 Hz
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x440-0x44f,0x400-0x43f,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
IOAPIC #0 intpin 19 -> irq 2
Freeing (NOT implemented) redirected PCI irq 10.
map[20]: type 4, range 32, base 0000d800, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=2
map[90]: type 4, range 32, base 00000440, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 1, range 32, base efffe000, size 12, enabled
found-> vendor=0x9004, dev=0x7895, revid=0x04
bus=0, slot=9, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=16
powerspec 1 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 4, range 32, base 0000dc00, size 8, enabled
map[14]: type 1, range 32, base effff000, size 12, enabled
found-> vendor=0x9004, dev=0x7895, revid=0x04
bus=0, slot=9, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=b, irq=16
powerspec 1 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 9.
map[10]: type 3, range 32, base ed9ff000, size 12, enabled
map[14]: type 4, range 32, base 0000d000, size 5, enabled
map[18]: type 1, range 32, base efe00000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x05
bus=0, slot=14, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=17
powerspec 1 supports D0 D1 D2 D3 current D0
Freeing (NOT implemented) redirected PCI irq 5.
map[10]: type 4, range 32, base 0000cc00, size 6, enabled
found-> vendor=0x1274, dev=0x5000, revid=0x00
bus=0, slot=15, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0105, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=18
Freeing (NOT implemented) redirected PCI irq 10.
map[10]: type 3, range 32, base ed9fe000, size 12, enabled
found-> vendor=0x109e, dev=0x0350, revid=0x11
bus=0, slot=16, func=0
class=04-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=2
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xeda00000-0xefafffff
pcib1: prefetched decode 0xe3800000-0xe58fffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 1, range 32, base ee000000, size 24, enabled
map[14]: type 3, range 32, base e4000000, size 24, enabled
found-> vendor=0x10de, dev=0x0020, revid=0x04
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=16
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=7f ostat2=50
ata1-master: ATAPI 7f 7f
ata1-slave: ATAPI 14 eb
ata1: after reset mask=03 stat0=7f stat1=10
ata1-master: ATA 7f 7f
ata1: devices=08
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
intpm0: <Intel 82371AB Power management controller> port 0x440-0x44f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 440
intpm0: intr IRQ 9 enabled revision 0
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped 400
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xd400-0xd4ff mem 0xefffe000-0xefffefff irq 16 at device 9.0 on pci0
ahc0: Defaulting to MEMIO on
ahc0: Reading SEEPROM...done.
ahc0: Low byte termination Enabled
ahc0: High byte termination Enabled
ahc0: Downloading Sequencer Program... 412 instructions downloaded
ahc0: Features 0x16235, Bugs 0x15, Flags 0x20485540
aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xeffff000-0xefffffff irq 16 at device 9.1 on pci0
ahc1: Defaulting to MEMIO on
ahc1: Reading SEEPROM...done.
ahc1: Low byte termination Enabled
ahc1: High byte termination Enabled
ahc1: Downloading Sequencer Program... 412 instructions downloaded
ahc1: Features 0x16235, Bugs 0x15, Flags 0x20485540
aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xd000-0xd01f mem 0xefe00000-0xefefffff,0xed9ff000-0xed9fffff irq 17 at device 14.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:90:27:34:2a:54
fxp0: PCI IDs: 8086 1229 8086 0009 0005
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
pcm0: <AudioPCI ES1370> port 0xcc00-0xcc3f irq 18 at device 15.0 on pci0
pcm0: sndbuf_setmap 859000, 1000; 0xc1c85000 -> 859000
pcm0: sndbuf_setmap 857000, 1000; 0xc1c83000 -> 857000
bktr0: <BrookTree 848> mem 0xed9fe000-0xed9fefff irq 2 at device 16.0 on pci0
brooktree0: PCI bus latency is 64.
bktr0: buffer size 3555328, addr 0x5000000
bktr0: GPIO is 0x00fffffb
bktr0: Hauppauge Model 56304 D
bktr0: Hauppauge WinCast/TV, Temic PAL tuner.
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
fdc0: output ready timeout
fdc0: cmd 3 failed at out byte 1 of 3
sio0: irq maps: 0x8001 0x8011 0x8001 0x8001
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x8001 0x8009 0x8001 0x8001
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
fdc0: output ready timeout
fdc0: cmd 3 failed at out byte 1 of 3
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
npx0: <math processor> on motherboard
npx0: INT 16 interface
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 2, 3, 4, 6, 7, 9, 12, 14, 15, 16, 17, 18, apic_imen: 0xfff82d21
Device configuration finished.
procfs registered
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounter "TSC" frequency 400913881 Hz
Timecounters tick every 10.000 msec
lo0: bpf attached
ad0: success setting UDMA33 on Intel PIIX4 chip
ad0: <IBM-DTTA-351010/T56OA73A> ATA-4 disk at ata0-master
ad0: 9671MB (19807200 sectors), 19650 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=12 dmamode=34 udmamode=66 cblid=0
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-slave: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata1-slave: success setting PIO4 on Intel PIIX4 chip
acd0: <LTN362/VL22> CDROM drive at ata1 as slave
acd0: read 6201KB/s (51523KB/s), 120KB buffer, PIO4
acd0: Reads: CD-DA
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 8 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
[0] f:80 typ:6 s(CHS):0/1/1 e(CHS):12/254/63 s:63 l:208782
[1] f:00 typ:15 s(CHS):13/0/1 e(CHS):1023/254/63 s:208845 l:19567170
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 106896384 end 106928639
GEOM: Configure ad0s2, start 106928640 length 10018391040 end 10125319679
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:7 s(CHS):13/1/1 e(CHS):1023/254/63 s:63 l:19567107
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s5, start 32256 length 10018358784 end 10018391039
(probe15:ahc1:0:0:0): Retrying Command
(probe21:ahc1:0:6:0): error 22
(probe21:ahc1:0:6:0): Unretryable Error
(ahc1:A:6:0): Sending SDTR period 2b, offset f
(ahc1:A:6:0): Received SDTR period 2b, offset f
Filtered to period 2b, offset f
ahc1: target 6 synchronous at 5.7MHz, offset = 0xf
(ahc1:A:0:0): Sending SDTR period 2b, offset f
(ahc1:A:0:0): Received SDTR period 2b, offset f
Filtered to period 2b, offset f
ahc1: target 0 synchronous at 5.7MHz, offset = 0xf
(ahc1:A:6:0): Sending SDTR period 2b, offset f
(ahc1:A:6:0): Received SDTR period 2b, offset f
Filtered to period 2b, offset f
(probe0:ahc0:0:0:0): Retrying Command
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR period 2b, offset 8
(ahc0:A:0:0): Received SDTR period 2b, offset 8
Filtered to period 2b, offset 8
ahc0: target 0 synchronous at 5.7MHz, offset = 0x8
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST173404LW 0003> Fixed Direct Access SCSI-3 device
pass0: Serial Number 3CE02QL50000704409EM
pass0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
pass1 at ahc1 bus 0 target 0 lun 0
pass1: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device
pass1: Serial Number RD3C8551
pass1: 5.813MB/s transfers (5.813MHz, offset 15), Tagged Queueing Enabled
pass2 at ahc1 bus 0 target 6 lun 0
pass2: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device
pass2: 5.813MB/s transfers (5.813MHz, offset 15)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST173404LW 0003> Fixed Direct Access SCSI-3 device
da0: Serial Number 3CE02QL50000704409EM
da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
(ahc1:A:6:0): Sending SDTR period 2b, offset f
GEOM: new disk da0
GEOM: new disk da1(ahc1:A:6:0): Received SDTR period 2b, offset f
Filtered to period 2b, offset f
SMP: AP CPU #1 Launched!
SMP: CPU1 ap_init():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
(cd0:ahc1:0:6:0): Retrying Command
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:143363997
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 73402366464 end 73402398719
da1 at ahc1 bus 0 target 0 lun 0
da1: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device
da1: Serial Number RD3C8551
da1: 5.813MB/s transfers (5.813MHz, offset 15), Tagged Queueing Enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):554/254/63 s:63 l:8916012
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da1s1, start 32256 length 4564998144 end 4565030399
GEOM: Configure da0s1a, start 0 length 1073741824 end 1073741823
GEOM: Configure da0s1b, start 1073741824 length 1073741824 end 2147483647
GEOM: Configure da0s1c, start 0 length 73402366464 end 73402366463
GEOM: Configure da0s1d, start 2147483648 length 71254882816 end 73402366463
GEOM: Configure da1s1a, start 268435456 length 402653184 end 671088639
GEOM: Configure da1s1b, start 0 length 268435456 end 268435455
GEOM: Configure da1s1c, start 0 length 4564998144 end 4564998143
GEOM: Configure da1s1e, start 671088640 length 3893909504 end 4564998143
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd800-0xd81f irq 2 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
(da0:ahc0:0:0:0): Queue Full
(da0:ahc0:0:0:0): tagged openings now 64
(da0:ahc0:0:0:0): Retrying Command
(cd0:ahc1:0:6:0): error 6
(cd0:ahc1:0:6:0): Unretryable Error
cd0 at ahc1 bus 0 target 6 lun 0
cd0: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device
cd0: 5.813MB/s transfers (5.813MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
***clip clip***
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #4: Sat Aug 16 21:17:19 EEST 2003
tomppa@cat.bert.sun.fi:/u/F/local/sup/5.0/sys/i386/compile/CAT
acpi_alloc_wakeup_handler: unable to allocate wake memory
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0648000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc0648244.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0648294.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc0648344.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc06483f0.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc0648440.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc06484e8.
Preloaded elf module "/boot/kernel/random.ko" at 0xc0648590.
Calibrating clock(s) ... i8254 clock: 1193187 Hz
Timecounter "i8254" frequency 1193187 Hz quality 0
Calibrating TSC clock ... TSC clock: 400912544 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x653 Stepping = 3
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000672000 - 0x000000001f6b1fff, 520355840 bytes (127040 pages)
avail memory = 513290240 (489 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fdb60
bios32: Entry = 0xfdb70 (c00fdb70) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb91
pnpbios: Found PnP BIOS data at 0xc00f7a30
pnpbios: Entry = f0000:74be Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00
00 01 40 00 04 02 07 01 00 01 0e 01 00 01 17 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01
07 01 08 01 09 01 0a 01 0b 01 0c 01 0e 01 0f 01
VESA: 33 mode(s) found
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc0541c82 (1000022)
VESA: NVidia
VESA: NVidia Riva TNT A5
random: <entropy source>
splash: image@0xc0542e60, size:787506
splash_bmp: beyond screen capacity (1024x768, 255 colors)
splash_bmp: beyond screen capacity (1024x768, 255 colors)
bmp_start(): splash_mode:261
splash: image decoder found: splash_bmp
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
acpi0: <AMIINT > on motherboard
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x440-0x44f,0x400-0x43f,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
IOAPIC #0 intpin 19 -> irq 2
Freeing (NOT implemented) redirected PCI irq 10.
map[20]: type 4, range 32, base 0000d800, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=2
map[90]: type 4, range 32, base 00000440, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 1, range 32, base efffe000, size 12, enabled
found-> vendor=0x9004, dev=0x7895, revid=0x04
bus=0, slot=9, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=16
powerspec 1 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 4, range 32, base 0000dc00, size 8, enabled
map[14]: type 1, range 32, base effff000, size 12, enabled
found-> vendor=0x9004, dev=0x7895, revid=0x04
bus=0, slot=9, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=b, irq=16
powerspec 1 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 9.
map[10]: type 3, range 32, base ed9ff000, size 12, enabled
map[14]: type 4, range 32, base 0000d000, size 5, enabled
map[18]: type 1, range 32, base efe00000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x05
bus=0, slot=14, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=17
powerspec 1 supports D0 D1 D2 D3 current D0
Freeing (NOT implemented) redirected PCI irq 5.
map[10]: type 4, range 32, base 0000cc00, size 6, enabled
found-> vendor=0x1274, dev=0x5000, revid=0x00
bus=0, slot=15, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0105, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=18
Freeing (NOT implemented) redirected PCI irq 10.
map[10]: type 3, range 32, base ed9fe000, size 12, enabled
found-> vendor=0x109e, dev=0x0350, revid=0x11
bus=0, slot=16, func=0
class=04-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=2
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xeda00000-0xefafffff
pcib1: prefetched decode 0xe3800000-0xe58fffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 1, range 32, base ee000000, size 24, enabled
map[14]: type 3, range 32, base e4000000, size 24, enabled
found-> vendor=0x10de, dev=0x0020, revid=0x04
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=16
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=7f ostat2=50
ata1-master: ATAPI 7f 7f
ata1-slave: ATAPI 14 eb
ata1: after reset mask=03 stat0=7f stat1=10
ata1-master: ATA 7f 7f
ata1: devices=08
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd800-0xd81f irq 2 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x440-0x44f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 440
intpm0: intr IRQ 9 enabled revision 0
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped 400
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xd400-0xd4ff mem 0xefffe000-0xefffefff irq 16 at device 9.0 on pci0
ahc0: Defaulting to MEMIO on
ahc0: Reading SEEPROM...done.
ahc0: Low byte termination Enabled
ahc0: High byte termination Enabled
ahc0: Downloading Sequencer Program... 412 instructions downloaded
ahc0: Features 0x16235, Bugs 0x15, Flags 0x20485540
aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xeffff000-0xefffffff irq 16 at device 9.1 on pci0
ahc1: Defaulting to MEMIO on
ahc1: Reading SEEPROM...done.
ahc1: Low byte termination Enabled
ahc1: High byte termination Enabled
ahc1: Downloading Sequencer Program... 412 instructions downloaded
ahc1: Features 0x16235, Bugs 0x15, Flags 0x20485540
aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xd000-0xd01f mem 0xefe00000-0xefefffff,0xed9ff000-0xed9fffff irq 17 at device 14.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:90:27:34:2a:54
fxp0: PCI IDs: 8086 1229 8086 0009 0005
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
pcm0: <AudioPCI ES1370> port 0xcc00-0xcc3f irq 18 at device 15.0 on pci0
pcm0: sndbuf_setmap 992000, 1000; 0xc1c9e000 -> 992000
pcm0: sndbuf_setmap 990000, 1000; 0xc1c9c000 -> 990000
bktr0: <BrookTree 848> mem 0xed9fe000-0xed9fefff irq 2 at device 16.0 on pci0
brooktree0: PCI bus latency is 64.
bktr0: buffer size 3555328, addr 0x5000000
bktr0: GPIO is 0x00fffffb
bktr0: Hauppauge Model 56304 D
bktr0: Hauppauge WinCast/TV, Temic PAL tuner.
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
fdc0: output ready timeout
fdc0: cmd 3 failed at out byte 1 of 3
sio0: irq maps: 0x8001 0x8011 0x8001 0x8001
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x8001 0x8009 0x8001 0x8001
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
fdc0: output ready timeout
fdc0: cmd 3 failed at out byte 1 of 3
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
npx0: <math processor> on motherboard
npx0: INT 16 interface
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:261
fb0: window:0xda33b000 size:4096k gran:4096k, buf:0xda33b000 size:4096k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 2, 3, 4, 6, 7, 9, 12, 14, 15, 16, 17, 18, apic_imen: 0xfff82d21
Device configuration finished.
procfs registered
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounter "TSC" frequency 400912544 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
ad0: success setting UDMA33 on Intel PIIX4 chip
ad0: <IBM-DTTA-351010/T56OA73A> ATA-4 disk at ata0-master
ad0: 9671MB (19807200 sectors), 19650 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=12 dmamode=34 udmamode=66 cblid=0
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-slave: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata1-slave: success setting PIO4 on Intel PIIX4 chip
acd0: <LTN362/VL22> CDROM drive at ata1 as slave
acd0: read 6201KB/s (51523KB/s), 120KB buffer, PIO4
acd0: Reads: CD-DA
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 8 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
[0] f:80 typ:6 s(CHS):0/1/1 e(CHS):12/254/63 s:63 l:208782
[1] f:00 typ:15 s(CHS):13/0/1 e(CHS):1023/254/63 s:208845 l:19567170
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 106896384 end 106928639
GEOM: Configure ad0s2, start 106928640 length 10018391040 end 10125319679
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:7 s(CHS):13/1/1 e(CHS):1023/254/63 s:63 l:19567107
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s5, start 32256 length 10018358784 end 10018391039
(probe15:ahc1:0:0:0): Retrying Command
(probe21:ahc1:0:6:0): error 22
(probe21:ahc1:0:6:0): Unretryable Error
(ahc1:A:6:0): Sending SDTR period 2b, offset f
(ahc1:A:6:0): Received SDTR period 2b, offset f
Filtered to period 2b, offset f
ahc1: target 6 synchronous at 5.7MHz, offset = 0xf
(ahc1:A:6:0): Sending SDTR period 2b, offset f
(ahc1:A:6:0): Received SDTR period 2b, offset f
Filtered to period 2b, offset f
(probe0:ahc0:0:0:0): Retrying Command
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 5.7MHz, offset = 0x8
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST173404LW 0003> Fixed Direct Access SCSI-3 device
pass0: Serial Number 3CE02QL50000704409EM
pass0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
pass1 at ahc1 bus 0 target 0 lun 0
pass1: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device
pass1: Serial Number RD3C8551
pass1: 5.813MB/s transfers (5.813MHz, offset 15), Tagged Queueing Enabled
pass2 at ahc1 bus 0 target 6 lun 0
pass2: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device
pass2: 5.813MB/s transfers (5.813MHz, offset 15)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST173404LW 0003> Fixed Direct Access SCSI-3 device
da0: Serial Number 3CE02QL50000704409EM
da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
GEOM: new disk da0
GEOM: new disk da1
SMP: AP CPU #1 Launched!
SMP: CPU1 ap_init():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
(cd0:ahc1:0:6:0): Retrying Command
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:143363997
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 73402366464 end 73402398719
da1 at ahc1 bus 0 target 0 lun 0
da1: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device
da1: Serial Number RD3C8551
da1: 5.813MB/s transfers (5.813MHz, offset 15), Tagged Queueing Enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):554/254/63 s:63 l:8916012
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da1s1, start 32256 length 4564998144 end 4565030399
GEOM: Configure da0s1a, start 0 length 1073741824 end 1073741823
GEOM: Configure da0s1b, start 1073741824 length 1073741824 end 2147483647
GEOM: Configure da0s1c, start 0 length 73402366464 end 73402366463
GEOM: Configure da0s1d, start 2147483648 length 71254882816 end 73402366463
GEOM: Configure da1s1a, start 268435456 length 402653184 end 671088639
GEOM: Configure da1s1b, start 0 length 268435456 end 268435455
GEOM: Configure da1s1c, start 0 length 4564998144 end 4564998143
GEOM: Configure da1s1e, start 671088640 length 3893909504 end 4564998143
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
(cd0:ahc1:0:6:0): error 6
(cd0:ahc1:0:6:0): Unretryable Error
cd0 at ahc1 bus 0 target 6 lun 0
cd0: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device
cd0: 5.813MB/s transfers (5.813MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?16190.39106.54098.485474>