Date: Sun, 25 Jul 2004 14:16:40 -0400 From: Jeffrey Racine <jracine@maxwell.syr.edu> To: freebsd-current@freebsd.org Subject: X.org conversion and amd64 failure... Message-ID: <1090779400.828.5.camel@x1-6-00-b0-d0-c2-67-0e.twcny.rr.com>
next in thread | raw e-mail | index | archive | help
Hi.
When conducting the conversion on my opteron box, it failed with the
following:
===> xorg-6.7.0_1 depends on file:
/usr/X11R6/lib/modules/dri/r200_dri.so - not found
===> Verifying install for /usr/X11R6/lib/modules/dri/r200_dri.so in
/usr/ports/graphics/dri
===> dri-5.0.2,1 is only for i386 alpha, and you are running amd64.
*** Error code 1
Stop in /usr/ports/graphics/dri.
*** Error code 1
Stop in /usr/ports/x11/xorg.
Thanks in advance...
I attach some system info.
uname -a
FreeBSD jracine.maxwell.syr.edu 5.2-CURRENT FreeBSD 5.2-CURRENT #2: Thu
Jul 22 15:56:41 EDT 2004
dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.2-CURRENT #2: Thu Jul 22 15:56:41 EDT 2004
root@jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 248 (2205.02-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf58 Stepping = 8
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory = 3674144768 (3503 MB)
avail memory = 3543965696 (3379 MB)
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 6.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xfd7fe000-0xfd7fefff irq 9
at device 0.0 on pci2
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfd7ff000-0xfd7fffff irq 9
at device 0.1 on pci2
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xfd7f8000-0xfd7fbfff,0xfd7fd800-0xfd7fdfff irq 5 at device 6.0 on pci2
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:00:00:00:01:0e:f8
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:01:0e:f8
fwe0: Ethernet address: 02:00:00:01:0e:f8
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ohci2: <NEC uPD 9210 USB controller> mem 0xfd7f7000-0xfd7f7fff irq 9 at
device 7.0 on pci2
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ohci3: <NEC uPD 9210 USB controller> mem 0xfd7fc000-0xfd7fcfff irq 11 at
device 7.1 on pci2
ohci3: [GIANT-LOCKED]
usb3: OHCI version 1.0
usb3: <NEC uPD 9210 USB controller> on ohci3
usb3: USB revision 1.0
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 7.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <AMD-8111> port 0xcc00-0xcc3f,0xc800-0xc8ff irq 10 at device 7.5
on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC655 AC97 Codec>
pcib3: <PCI-PCI bridge> at device 10.0 on pci0
pci3: <PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0xac00-0xac1f mem 0xfd9c0000-0xfd9dffff,0xfd9e0000-0xfd9fffff irq 10 at
device 1.0 on pci3
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:02:b3:ed:0b:12
em0: Speed:N/A Duplex:N/A
skc0: <Marvell Gigabit Ethernet> port 0xa800-0xa8ff mem
0xfd99c000-0xfd99ffff irq 9 at device 3.0 on pci3
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:d0:68:03:d4:99
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, autoskc0: [GIANT-LOCKED]
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver
attached)
pcib4: <PCI-PCI bridge> at device 11.0 on pci0
pci4: <PCI bus> on pcib4
twe0: <3ware Storage Controller. Driver version 1.50.01.002> port
0xbc00-0xbc0f mem 0xfe000000-0xfe7fffff irq 10 at device 1.0 on pci4
twe0: [GIANT-LOCKED]
twe0: 4 ports, Firmware FE7S 1.05.00.065, BIOS BE7X 1.08.00.048
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver
attached)
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem 0xcf800-0xd07ff,0xc0000-0xcf7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 2205016768 Hz quality 800
Timecounters tick every 0.976 msec
ata1-master: FAILURE - ATAPI_RESET no interrupt
acd0: CDRW <SAMSUNG CDRW/DVD SM-352B> at ata1-master PIO4
twed0: <Unit 0, TwinStor, Normal> on twe0
twed0: 70910MB (145224064 sectors)
em0: Link is up 100 Mbps Full Duplex
--
Professor J. S. Racine Phone: (315) 443-1630
Department of Economics FAX: (315) 443-1081
Syracuse University e-mail: jracine@maxwell.syr.edu
Syracuse, NY, USA 13244-1020
http://www.maxwell.syr.edu/econ/faculty/jeffrey_racine.htm
`The generation of random numbers is too important to be left to
chance.'
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1090779400.828.5.camel>