Date: Wed, 11 Jun 2003 12:54:09 -0700 From: "Kevin Oberman" <oberman@es.net> To: Mark Santcroos <marks@ripe.net> Cc: freebsd-mobile@freebsd.org Subject: Re: FreeBSD laptop with: 56k modem, ethernet, Xfree86 Message-ID: <20030611195409.D96355D08@ptavv.es.net> In-Reply-To: Message from Mark Santcroos <marks@ripe.net> <20030610211102.GG1761@laptop.6bone.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
> Date: Tue, 10 Jun 2003 23:11:02 +0200 > From: Mark Santcroos <marks@ripe.net> > > On Tue, Jun 10, 2003 at 02:02:53PM -0700, Kevin Oberman wrote: > > Turns out that the only unknown PCI device on my system is the modem. > > Intel 82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller in class > > "simple comms". > > Can you show pciconf -vl? (Only the piece with the audio stuff) > > Mark > > -- > Mark Santcroos RIPE Network Coordination Centre > http://www.ripe.net/home/mark/ New Projects Group/TTM > Sorry to be so late with this, but I somehow missed the message until I saw Harald's comment. Here is the whole thing. Since the ICH3 does most everything, the audio looks about the same as the network. agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x1a308086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to I/O Bridge' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04 hdr=0x01 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge' class = bridge subclass = PCI-PCI uhci0@pci0:29:0: class=0x0c0300 card=0x02201014 chip=0x24828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #1' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x02201014 chip=0x24848086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #2' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x02201014 chip=0x24878086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #3' class = serial bus subclass = USB pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x42 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM (ICH2/3) PCI to I/O Hub Bridge (2448)' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM LPC Interface or ISA bridge: see Notes' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x01018a card=0x02201014 chip=0x248a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM (ICH3-M) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA ichsmb0@pci0:31:3: class=0x0c0500 card=0x02201014 chip=0x24838086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) SMBus Controller' class = serial bus subclass = SMBus pcm0@pci0:31:5: class=0x040100 card=0x05081014 chip=0x24858086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Audio Controller' class = multimedia subclass = audio none0@pci0:31:6: class=0x070300 card=0x051a1014 chip=0x24868086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller' class = simple comms none1@pci1:0:0: class=0x030000 card=0x05171014 chip=0x4c571002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies' device = 'Radeon Mobility M7 LW' class = display subclass = VGA cbb0@pci2:0:0: class=0x060700 card=0x05121014 chip=0xac55104c rev=0x01 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI1520 PC card CardBus Controller' class = bridge subclass = PCI-CardBus cbb1@pci2:0:1: class=0x060700 card=0x05121014 chip=0xac55104c rev=0x01 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI1520 PC card CardBus Controller' class = bridge subclass = PCI-CardBus none2@pci2:2:0: class=0x028000 card=0x25138086 chip=0x38731260 rev=0x01 hdr=0x00 vendor = 'Intersil Americas Inc (Was: Harris Semiconductor)' device = 'PRISM 2.5 802.11b 11Mbps Wireless Controller' class = network fxp0@pci2:8:0: class=0x020000 card=0x02091014 chip=0x10318086 rev=0x42 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM (ICH3) PRO/100 VE (LOM) Network Connection' class = network subclass = ethernet -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030611195409.D96355D08>