Skip site navigation (1)Skip section navigation (2) 
Date:      Wed, 8 May 2019 10:56:52 +0000 (UTC)
From:      Hans Petter Selasky <hselasky@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r347303 - head/sys/dev/mlx5/mlx5_ib
Message-ID:  <201905081056.x48AuqLR057622@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help 
Author: hselasky
Date: Wed May  8 10:56:51 2019
New Revision: 347303
URL: https://svnweb.freebsd.org/changeset/base/347303

Log:
  Add support for new rates to mlx5ib.
  
  Submitted by:	slavash@
  MFC after:      3 days
  Sponsored by:   Mellanox Technologies

Modified:
  head/sys/dev/mlx5/mlx5_ib/mlx5_ib_main.c
  head/sys/dev/mlx5/mlx5_ib/mlx5_ib_qp.c

Modified: head/sys/dev/mlx5/mlx5_ib/mlx5_ib_main.c
==============================================================================
--- head/sys/dev/mlx5/mlx5_ib/mlx5_ib_main.c	Wed May  8 10:56:22 2019	(r347302)
+++ head/sys/dev/mlx5/mlx5_ib/mlx5_ib_main.c	Wed May  8 10:56:51 2019	(r347303)
@@ -223,14 +223,70 @@ static int translate_eth_proto_oper(u32 eth_proto_oper
 	return 0;
 }
 
+static int translate_eth_ext_proto_oper(u32 eth_proto_oper, u8 *active_speed,
+					u8 *active_width)
+{
+	switch (eth_proto_oper) {
+	case MLX5E_PROT_MASK(MLX5E_SGMII_100M):
+	case MLX5E_PROT_MASK(MLX5E_1000BASE_X_SGMII):
+		*active_width = IB_WIDTH_1X;
+		*active_speed = IB_SPEED_SDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_5GBASE_R):
+		*active_width = IB_WIDTH_1X;
+		*active_speed = IB_SPEED_DDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_10GBASE_XFI_XAUI_1):
+		*active_width = IB_WIDTH_1X;
+		*active_speed = IB_SPEED_QDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_40GBASE_XLAUI_4_XLPPI_4):
+		*active_width = IB_WIDTH_4X;
+		*active_speed = IB_SPEED_QDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_25GAUI_1_25GBASE_CR_KR):
+		*active_width = IB_WIDTH_1X;
+		*active_speed = IB_SPEED_EDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_50GAUI_2_LAUI_2_50GBASE_CR2_KR2):
+		*active_width = IB_WIDTH_2X;
+		*active_speed = IB_SPEED_EDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_50GAUI_1_LAUI_1_50GBASE_CR_KR):
+		*active_width = IB_WIDTH_1X;
+		*active_speed = IB_SPEED_HDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_CAUI_4_100GBASE_CR4_KR4):
+		*active_width = IB_WIDTH_4X;
+		*active_speed = IB_SPEED_EDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_100GAUI_2_100GBASE_CR2_KR2):
+		*active_width = IB_WIDTH_2X;
+		*active_speed = IB_SPEED_HDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_200GAUI_4_200GBASE_CR4_KR4):
+		*active_width = IB_WIDTH_4X;
+		*active_speed = IB_SPEED_HDR;
+		break;
+	default:
+		*active_width = IB_WIDTH_4X;
+		*active_speed = IB_SPEED_QDR;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int mlx5_query_port_roce(struct ib_device *device, u8 port_num,
 				struct ib_port_attr *props)
 {
 	struct mlx5_ib_dev *dev = to_mdev(device);
+	u32 out[MLX5_ST_SZ_DW(ptys_reg)] = {};
 	struct net_device *ndev;
 	enum ib_mtu ndev_ib_mtu;
 	u16 qkey_viol_cntr;
 	u32 eth_prot_oper;
+	bool ext;
 	int err;
 
 	memset(props, 0, sizeof(*props));
@@ -238,13 +294,21 @@ static int mlx5_query_port_roce(struct ib_device *devi
 	/* Possible bad flows are checked before filling out props so in case
 	 * of an error it will still be zeroed out.
 	 */
-	err = mlx5_query_port_eth_proto_oper(dev->mdev, &eth_prot_oper, port_num);
+	err = mlx5_query_port_ptys(dev->mdev, out, sizeof(out), MLX5_PTYS_EN,
+	    port_num);
 	if (err)
 		return err;
 
-	translate_eth_proto_oper(eth_prot_oper, &props->active_speed,
-				 &props->active_width);
+	ext = MLX5_CAP_PCAM_FEATURE(dev->mdev, ptys_extended_ethernet);
+	eth_prot_oper = MLX5_GET_ETH_PROTO(ptys_reg, out, ext, eth_proto_oper);
 
+	if (ext)
+		translate_eth_ext_proto_oper(eth_prot_oper, &props->active_speed,
+		    &props->active_width);
+	else
+		translate_eth_proto_oper(eth_prot_oper, &props->active_speed,
+		    &props->active_width);
+
 	props->port_cap_flags  |= IB_PORT_CM_SUP;
 	props->port_cap_flags  |= IB_PORT_IP_BASED_GIDS;
 
@@ -772,9 +836,7 @@ static int translate_active_width(struct ib_device *ib
 	if (active_width & MLX5_IB_WIDTH_1X) {
 		*ib_width = IB_WIDTH_1X;
 	} else if (active_width & MLX5_IB_WIDTH_2X) {
-		mlx5_ib_dbg(dev, "active_width %d is not supported by IB spec\n",
-			    (int)active_width);
-		err = -EINVAL;
+		*ib_width = IB_WIDTH_2X;
 	} else if (active_width & MLX5_IB_WIDTH_4X) {
 		*ib_width = IB_WIDTH_4X;
 	} else if (active_width & MLX5_IB_WIDTH_8X) {

Modified: head/sys/dev/mlx5/mlx5_ib/mlx5_ib_qp.c
==============================================================================
--- head/sys/dev/mlx5/mlx5_ib/mlx5_ib_qp.c	Wed May  8 10:56:22 2019	(r347302)
+++ head/sys/dev/mlx5/mlx5_ib/mlx5_ib_qp.c	Wed May  8 10:56:51 2019	(r347303)
@@ -2125,7 +2125,7 @@ static int ib_rate_to_mlx5(struct mlx5_ib_dev *dev, u8
 {
 	if (rate == IB_RATE_PORT_CURRENT) {
 		return 0;
-	} else if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_300_GBPS) {
+	} else if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_600_GBPS) {
 		return -EINVAL;
 	} else {
 		while (rate != IB_RATE_2_5_GBPS &&

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201905081056.x48AuqLR057622>