Date: Thu, 11 Dec 2003 11:10:42 +0100 From: Franz Klammer <klammer@webonaut.com> To: Dan Strick <strick@covad.net> Cc: current@freebsd.org Subject: Re: 5.2-RC1: massive immediate failure (ata driver) Message-ID: <3FD842A2.8050400@webonaut.com> In-Reply-To: <200312110501.hBB51H4B000356@mist.nodomain> References: <200312110501.hBB51H4B000356@mist.nodomain>
next in thread | previous in thread | raw e-mail | index | archive | help
Dan Strick wrote: >I just attempted to install 5.2-RC1 and had to give up before the >kernel on the bootstrap floppy finished booting. When it tried to >access my Serial ATA disks, it started slowly spitting out a possibly >endless stream of error messages. This one is typical: > > ad4: WARNING - READ DMA recovered from missing interrupt > > > that's a me-too mail because i get the same message when shut down my pc. it gives up to flush some buffer with the message above. 5.2-CURRENT FreeBSD 5.2-CURRENT #12: Tue Dec 9 14:43:21 CET 2003 atapci0: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100 acd0: DVDROM <ATAPI DVD-ROM 16X> at ata1-master PIO4 franz. >I eventually gave up and aborted the boot. I suppose I could disable >the SATA controller in the BIOS, but I don't see much point in doing >that since the SATA disks are an essential part of my system. > >I have a 2.8 GHz hyperthreaded P4 on a Gigabyte 8KNXP motherboard. >It uses the Intel 875P/ICH5R support chipset. FreeBSD 4.9 and 5.1 >boot and run just fine on this system. > >This is the output from "dmesg | grep ata" when running FreeBSD 4.9: > >atapci0: <Intel ICH5 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 9 at device 31.1 on pci0 >ata0: at 0x1f0 irq 14 on atapci0 >ata1: at 0x170 irq 15 on atapci0 >atapci1: <Intel ICH5 SATA150 controller> port 0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq 9 at device 31.2 on pci0 >ata2: at 0xc000 on atapci1 >ata3: at 0xc800 on atapci1 >ad0: 78167MB <Maxtor 6Y080L0> [158816/16/63] at ata0-master UDMA100 >ad1: 78167MB <Maxtor 4R080L0> [158816/16/63] at ata0-slave UDMA100 >ad4: 114473MB <ST3120026AS> [232581/16/63] at ata2-master UDMA100 >ad6: 114473MB <ST3120026AS> [232581/16/63] at ata3-master UDMA100 >acd0: CD-RW <SAMSUNG CDRW/DVD SM-352B> at ata1-master UDMA33 > >Dan Strick >strick@covad.net >_______________________________________________ >freebsd-current@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-current >To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > > -- webonaut.com :: web technology klammer@webonaut.com :: http://webonaut.com/ fon +43-664-3434708 -- MIG_media intelligence group > agentur für werbung & neue medien A-5020 Salzburg > Linzergasse 21 Fon +43-662-453091-0 > Fax -99 office@mig.co.at > http://www.mig.co.at --
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FD842A2.8050400>