Date: Wed, 21 Aug 2002 08:03:45 -0700 From: "Bruce Rhodewalt" <bruce@rhodewalt.com> To: <freebsd-mobile@freebsd.org> Subject: Linksys card and large files Message-ID: <BIEJJAAKCJCMJKKDLIFIGEBGDOAA.bruce@rhodewalt.com>
next in thread | raw e-mail | index | archive | help
I'm looking for troubleshooting advice or parallel stories with happy
endings.
On my FreeBSD 4.6 server, with a Linksys WMP11, small files transfer fine,
but large files (> ~100K) timeout. This happens using both WebDAV (Web
Folders) and Samba. I have tested by copying files from the clients
(Windows 2000 and Windows 98) to the server. If the server is connected by
100Mbps Ethernet, there is no problem.
I've included settings and details below. I'm running smbd and nmbd as
daemons. For WebDAV, I'm running Apache 2.
Thanks for any help.
Bruce Rhodewalt
bruce@rhodewalt.com
760-861-9672
NIC serial number: [ 0123456789 ]
Station name: [ hairspray ]
SSID for IBSS creation: [ FreeBSD IBSS ]
Current netname (SSID): [ linksys ]
Desired netname (SSID): [ ]
Current BSSID: [ 00:04:5a:cf:e9:6b ]
Channel list: [ 2047 ]
IBSS channel: [ 6 ]
Current channel: [ 6 ]
Comms quality/signal/noise: [ 92 154 0 ]
Promiscuous mode: [ Off ]
Port type (1=BSS, 3=ad-hoc): [ 1 ]
MAC address: [ 00:06:25:a8:03:72 ]
TX rate (selection): [ 3 ]
TX rate (actual speed): [ 11 ]
RTS/CTS handshake threshold: [ 2347 ]
Create IBSS: [ Off ]
Access point density: [ 1 ]
Power Mgmt (1=on, 0=off): [ 0 ]
Max sleep time: [ 100 ]
WEP encryption: [ Off ]
TX encryption key: [ 1 ]
Encryption keys: [ ][ ][ ][ ]
wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.12 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::206:25ff:fea8:372%wi0 prefixlen 64 scopeid 0x1
ether 00:06:25:a8:03:72
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
status: associated
ssid linksys 1:""
stationname hairspray
channel 6 authmode OPEN powersavemode OFF powersavesleep 100
wepmode OFF weptxkey 1
rl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:04:e2:20:97:70
media: Ethernet autoselect (10baseT/UTP)
status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
Note: wi0 and rl0 (the NIC) have never both been mapped to TCP/IP at any one
time. That is, the IP address 192.168.1.12 is the only one in use on this
machine. When I test over the wired connection, wi0 is not mapped to any IP
address, but rl0 uses 192.168.1.12.
Bruce Rhodewalt
bruce@rhodewalt.com
760-861-9672
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BIEJJAAKCJCMJKKDLIFIGEBGDOAA.bruce>