Date: Tue, 27 Sep 2005 14:37:55 -0300 From: AT Matik <asstec@matik.com.br> To: freebsd-mobile@freebsd.org, Bruno Ducrot <ducrot@poupinou.org> Subject: Re: NB Acer [3|5]0x and ACPI Message-ID: <200509271437.55361.asstec@matik.com.br> In-Reply-To: <20050927145216.GB26697@poupinou.org> References: <20050925080324.27714.qmail@web32809.mail.mud.yahoo.com> <200509270802.52828.asstec@matik.com.br> <20050927145216.GB26697@poupinou.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--Boundary-00=_zNYOD7dlv+/0YYC
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
On Tuesday 27 September 2005 11:52, Bruno Ducrot wrote:
> > acpi0: <PTLTD RSDT> on motherboard
> > acpi0: [MPSAFE]
> > ACPI-0438: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND
>
> The DSDT override isn't ok.
>
> Are you sure you applied the patch I send to you to the
> anb.acpi.dump.txt file?
>
absolutely
but with the patch the PC freeze totally so I can not do the dumps with your
patch on battery
but here attached you find dmesg and sysct hw.acpi output WITH your patch and
boot -v but both on AC cable
thank's
--Boundary-00=_zNYOD7dlv+/0YYC
Content-Type: text/plain; charset="iso-8859-1";
name="anb.hw.acpi.-v.cmbat-0.ac.patched.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="anb.hw.acpi.-v.cmbat-0.ac.patched.txt"
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_supported: C1/0 C2/99 C3/999
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00% 0.00% 0.00%
hw.acpi.acline: 1
hw.acpi.battery.life: 100
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.tz0.temperature: 48.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 93.0C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 97.0C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
--Boundary-00=_zNYOD7dlv+/0YYC
Content-Type: text/plain; charset="iso-8859-1";
name="anb.dmesg.-v.cmbat-0.ac.patched.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="anb.dmesg.-v.cmbat-0.ac.patched.txt"
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA5 #7: Sat Sep 24 17:57:35 BRST 2005
hmm@anb.matik.com.br:/usr/src/sys/i386/compile/anb
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0844000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0844198.
Preloaded splash_image_data "/boot/im.bmp" at 0xc0844248.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0844294.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc0844340.
Preloaded acpi_dsdt "/boot/DSDT.aml" at 0xc08443ec.
Preloaded elf module "/boot/kernel/if_ndis.ko" at 0xc0844430.
Preloaded elf module "/boot/kernel/ndis.ko" at 0xc08444dc.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0844588.
MP Configuration Table version 1.4 found at 0xc009fc70
Table 'FACP' at 0xdef9e5f
Table 'SSDT' at 0xdef9ed3
Table 'APIC' at 0xdef9f88
MADT: Found table at 0xdef9f88
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <PTLTD APIC >
Calibrating clock(s) ... i8254 clock: 1193193 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1600064868 Hz
CPU: Mobile AMD Sempron(tm) Processor 2800+ (1600.06-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xc2500800<SYSCALL,NX,MMX+,<b25>,3DNow+,3DNow>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 233766912 (222 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000000dacbfff, 216690688 bytes (52903 pages)
avail memory = 219262976 (209 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f7f10
bios32: Entry = 0xfd5f0 (c00fd5f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd5f0+0x186
pnpbios: Found PnP BIOS data at 0xc00f7f90
pnpbios: Entry = f0000:c411 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
ACPI-0377: *** Info: Table [SSDT] replaced by host OS
ACPI: overriding DSDT/SSDT with custom table
ACPI-0377: *** Info: Table [DSDT] replaced by host OS
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 11 polarity: low
ioapic0: intpin 11 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
VESA: information block
56 45 53 41 00 03 00 01 00 01 00 00 00 00 22 00
00 01 00 01 00 01 04 01 00 01 25 01 00 01 2a 01
00 01 02 01 01 01 00 01 03 01 04 01 05 01 0d 01
0e 01 10 01 11 01 13 01 14 01 16 01 17 01 27 01
VESA: 25 mode(s) found
VESA: v3.0, 16384k memory, flags:0x0, mode table:0xc070a542 (1000022)
VESA: SiS
VESA: Silicon Integrated Systems Corp. 6330 2.27.g8
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
splash: image@0xc0796204, size:46078
bmp_start(): splash_mode:257
splash: image decoder found: splash_bmp
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010010
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=07601039)
pcibios: BIOS version 2.10
Found $PIR table, 8 entries at 0xc00fdd30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x41 3 4 5 7 9 10 11 12 15
embedded 0 1 B 0x42 3 4 5 7 9 10 11 12 15
embedded 0 2 A 0x41 3 4 5 7 9 10 11 12 15
embedded 0 2 B 0x42 3 4 5 7 9 10 11 12 15
embedded 0 2 C 0x43 3 4 5 7 9 10 11 12 15
embedded 0 2 D 0x44 3 4 5 7 9 10 11 12 15
embedded 0 3 A 0x60 3 4 5 7 9 10 11 12 15
embedded 0 3 B 0x61 3 4 5 7 9 10 11 12 15
embedded 0 3 C 0x62 3 4 5 7 9 10 11 12 15
embedded 0 3 D 0x63 3 4 5 7 9 10 11 12 15
embedded 0 4 A 0x44 3 4 5 7 9 10 11 12 15
embedded 0 6 A 0x44 3 4 5 7 9 10 11 12 15
embedded 0 11 A 0x42 3 4 5 7 9 10 11 12 15
embedded 0 11 B 0x43 3 4 5 7 9 10 11 12 15
AcpiOsDerivePciId: bus 0 dev 24 func 3
AcpiOsDerivePciId: bus 0 dev 2 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 2 func 0
unknown: I/O range not supported
acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0
acpi_ec0: info: new max delay is 30 us
acpi_ec0: info: new max delay is 350 us
acpi_ec0: info: new max delay is 360 us
acpi_ec0: info: new max delay is 620 us
acpi_ec0: info: new max delay is 640 us
acpi_ec0: info: new max delay is 670 us
acpi_ec0: info: new max delay is 680 us
pci_link0: <ACPI PCI Link LNKA> irq 7 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 9 10 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 9 10 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11
pci_link1: <ACPI PCI Link LNKB> irq 4 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 4 N 0 3 4 5 7 9 10 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 4 N 0 3 4 5 7 9 10 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11
pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11
pci_link3: <ACPI PCI Link LNKD> irq 3 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 7 9 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 7 9 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11
pci_link4: <ACPI PCI Link LNKE> irq 9 on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11
pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11
pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1039, dev=0x0760, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base e0000000, size 25, enabled
found-> vendor=0x1039, dev=0x0002, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0008, revid=0x25
bus=0, slot=2, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x5513, revid=0x00
bus=0, slot=2, func=5
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00002000, size 4, enabled
found-> vendor=0x1039, dev=0x7013, revid=0xa0
bus=0, slot=2, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001000, size 8, enabled
map[14]: type 4, range 32, base 00001c00, size 7, enabled
pcib0: matched entry for 0.2.INTC
pcib0: slot 2 INTC hardwired to IRQ 18
found-> vendor=0x1039, dev=0x7012, revid=0xa0
bus=0, slot=2, func=7
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, enabled
map[14]: type 4, range 32, base 00001c80, size 7, enabled
pcib0: matched entry for 0.2.INTC
pcib0: slot 2 INTC hardwired to IRQ 18
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=9
map[10]: type 1, range 32, base e2002000, size 12, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 20
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=b, irq=11
map[10]: type 1, range 32, base e2003000, size 12, enabled
pcib0: matched entry for 0.3.INTB
pcib0: slot 3 INTB hardwired to IRQ 21
found-> vendor=0x1039, dev=0x7002, revid=0x00
bus=0, slot=3, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e2004000, size 12, enabled
pcib0: matched entry for 0.3.INTD
pcib0: slot 3 INTD hardwired to IRQ 23
found-> vendor=0x1039, dev=0x0900, revid=0x91
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001800, size 8, enabled
map[14]: type 1, range 32, base e2005000, size 12, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 19
found-> vendor=0x104c, dev=0xac50, revid=0x02
bus=0, slot=6, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x14e4, dev=0x4318, revid=0x02
bus=0, slot=11, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=4
map[10]: type 1, range 32, base e2000000, size 13, enabled
pcib0: matched entry for 0.11.INTA
pcib0: slot 11 INTA hardwired to IRQ 17
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <SiS 760 host to AGP bridge> mem 0xe0000000-0xe1ffffff at device 0.0 on pci0
agp0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 4M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xe2100000-0xe21fffff
pcib1: prefetched decode 0xe8000000-0xefffffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP0 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1039, dev=0x6330, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e8000000, size 27, enabled
pcib1: (null) requested memory range 0xe8000000-0xefffffff: good
map[14]: type 1, range 32, base e2100000, size 17, enabled
pcib1: (null) requested memory range 0xe2100000-0xe211ffff: good
map[18]: type 4, range 32, base 0000a000, size 7, enabled
pcib1: (null) requested I/O range 0xa000-0xa07f: in range
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 2.5 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <simple comms, generic modem> at device 2.6 (no driver attached)
pcm0: <SiS 7012> port 0x1400-0x14ff,0x1c80-0x1cff irq 18 at device 2.7 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1400
pcm0: Reserved 0x80 bytes for rid 0x14 type 4 at 0x1c80
pcm0: [GIANT-LOCKED]
pcm0: <Unknown AC97 Codec (id = 0x414c4770)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, AMAP, reserved 5
pcm0: sndbuf_setmap d96b000, 4000; 0xcd88c000 -> d96b000
pcm0: sndbuf_setmap d966000, 4000; 0xcd890000 -> d966000
ohci0: <SiS 5571 USB controller> mem 0xe2002000-0xe2002fff irq 20 at device 3.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe2002000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe2003000-0xe2003fff irq 21 at device 3.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe2003000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe2004000-0xe2004fff irq 23 at device 3.2 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe2004000
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
sis0: <SiS 900 10/100BaseTX> port 0x1800-0x18ff mem 0xe2005000-0xe2005fff irq 19 at device 4.0 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1800
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
sis0: Ethernet address: 00:c0:9f:ae:45:16
sis0: [MPSAFE]
cbb0: <TI1410 PCI-CardBus Bridge> at device 6.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 19
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac50104c 0x02100007 0x06070002 0x00024000
0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400113
0x40: 0x00831025 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0844d060 0x00000000 0x00000000 0x00521d22
0x90: 0x616402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00100 0x0000001e 0x0000001f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci0: <network> at device 11.0 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xd5fff,0xdc000-0xe3fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: No FDOUT register!
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 100003790 hz
Timecounter "TSC" frequency 1600064868 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on SiS 5513 chip
ad0: setting UDMA100 on SiS 5513 chip
ad0: 38154MB <WDC WD400UE-00HCT0 09.07D09> at ata0-master UDMA100
ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
battery0: battery initialization done, tried 1 times
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on SiS 5513 chip
acd0: setting UDMA33 on SiS 5513 chip
acd0: <Slimtype COMBO SOSC-2483K/KCK2> CDRW drive at ata1 as master
acd0: 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 47999 Hz, will use 48000 Hz
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <Slimtype COMBO SOSC-2483K KCK2> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: new disk cd0
ATA PseudoRAID loaded
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 11 (ISA IRQ 11) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <Slimtype COMBO SOSC-2483K KCK2> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
linprocfs registered
acpi_ec0: info: new max delay is 760 us
--Boundary-00=_zNYOD7dlv+/0YYC--
A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura.
Service fornecido pelo Datacenter Matik https://datacenter.matik.com.br
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200509271437.55361.asstec>