Date: Mon, 26 Jan 2026 17:20:41 +0000 From: nahn03 <nahn03@proton.me> To: Andrea Venturoli <ml@netfence.it> Cc: freebsd-questions@freebsd.org Subject: Re: umass not working and other USB troubles Message-ID: <G6rYlkEQajmxqlgeLH7aOKqVBHji9jYT12eOiSVjFv4Xng-mBQlvLGI4BDxZrjQrdNIw4DpWfdwPBsNEJRirbG8w7hxzCRl8wrNqh_hwsnU=@proton.me> In-Reply-To: <96eeda50-d7ac-4481-8e7b-a564805f5722@netfence.it>
index | next in thread | previous in thread | raw e-mail
Hello: One idea that may work is making sure the USB devices are unplugged, then issue the command: sudo tail -f /var/log/messages Then plug a single device back into a USB port and please report back what the log says. Sent with Proton Mail secure email. On Monday, January 26th, 2026 at 10:28 AM, Andrea Venturoli <ml@netfence.it> wrote: > > > Hello. > > On a new server I've recently installed, I'm unable to use external USB > HDs or keys. > When I connect any, I hear it spin up, but the OS won't show anything in > the logs or in "camcontrol devlist". > Of course I installed the system by booting an USB key, so it works when > booting from there. > > Bonus: if I try hard, [un]plugging it several times, I may lose the > (physical) keyboard or the connection to the UPS! > > > > > # freebsd-version -ku > > 14.3-RELEASE-p5 > > 14.3-RELEASE-p5 > > > # pciconf -lv > > hostb0@pci0:0:0:0: class=0x060000 rev=0x01 hdr=0x00 vendor=0x8086 device=0xa711 subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > class = bridge > > subclass = HOST-PCI > > xhci0@pci0:0:20:0: class=0x0c0330 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a60 subvendor=0x1043 subdevice=0x88a1 > > vendor = 'Intel Corporation' > > device = 'Raptor Lake USB 3.2 Gen 2x2 (20 Gb/s) XHCI Host Controller' > > class = serial bus > > subclass = USB > > none0@pci0:0:20:2: class=0x050000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a27 subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > device = 'Raptor Lake-S PCH Shared SRAM' > > class = memory > > subclass = RAM > > none1@pci0:0:21:0: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a4c subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > device = 'Raptor Lake Serial IO I2C Host Controller' > > class = serial bus > > none2@pci0:0:21:1: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a4d subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > device = 'Raptor Lake Serial IO I2C Host Controller' > > class = serial bus > > none3@pci0:0:21:3: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a4f subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > class = serial bus > > none4@pci0:0:22:0: class=0x078000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a68 subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > device = 'Raptor Lake CSME HECI' > > class = simple comms > > none5@pci0:0:22:1: class=0x078000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a69 subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > device = 'Raptor Lake CSME HECI' > > class = simple comms > > none6@pci0:0:22:4: class=0x078000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a6c subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > class = simple comms > > ahci0@pci0:0:23:0: class=0x010601 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a62 subvendor=0x1043 subdevice=0x889f > > vendor = 'Intel Corporation' > > device = 'Raptor Lake SATA AHCI Controller' > > class = mass storage > > subclass = SATA > > none7@pci0:0:25:0: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a7c subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > class = serial bus > > none8@pci0:0:25:1: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a7d subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > class = serial bus > > pcib1@pci0:0:28:0: class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a38 subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > device = 'Raptor Lake PCI Express Root Port' > > class = bridge > > subclass = PCI-PCI > > pcib3@pci0:0:28:2: class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a3a subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > device = 'Raptor Point-S PCH - PCI Express Root Port 3' > > class = bridge > > subclass = PCI-PCI > > pcib4@pci0:0:28:3: class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a3b subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > device = 'Raptor Lake PCI Express Root Port' > > class = bridge > > subclass = PCI-PCI > > pcib5@pci0:0:28:4: class=0x060400 rev=0x11 hdr=0x01 vendor=0x8086 device=0x7a3c subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > class = bridge > > subclass = PCI-PCI > > none9@pci0:0:31:0: class=0x060100 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a14 subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > class = bridge > > subclass = PCI-ISA > > none10@pci0:0:31:4: class=0x0c0500 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a23 subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > device = 'Raptor Lake-S PCH SMBus Controller' > > class = serial bus > > subclass = SMBus > > none11@pci0:0:31:5: class=0x0c8000 rev=0x11 hdr=0x00 vendor=0x8086 device=0x7a24 subvendor=0x8086 subdevice=0x7270 > > vendor = 'Intel Corporation' > > device = 'Raptor Lake SPI (flash) Controller' > > class = serial bus > > pcib2@pci0:1:0:0: class=0x060400 rev=0x06 hdr=0x01 vendor=0x1a03 device=0x1150 subvendor=0x1043 subdevice=0x87ed > > vendor = 'ASPEED Technology, Inc.' > > device = 'AST1150 PCI-to-PCI Bridge' > > class = bridge > > subclass = PCI-PCI > > vgapci0@pci0:2:0:0: class=0x030000 rev=0x52 hdr=0x00 vendor=0x1a03 device=0x2000 subvendor=0x1043 subdevice=0x87ed > > vendor = 'ASPEED Technology, Inc.' > > device = 'ASPEED Graphics Family' > > class = display > > subclass = VGA > > igb0@pci0:3:0:0: class=0x020000 rev=0x03 hdr=0x00 vendor=0x8086 device=0x1533 subvendor=0x1043 subdevice=0x8557 > > vendor = 'Intel Corporation' > > device = 'I210 Gigabit Network Connection' > > class = network > > subclass = ethernet > > igb1@pci0:4:0:0: class=0x020000 rev=0x03 hdr=0x00 vendor=0x8086 device=0x1533 subvendor=0x1043 subdevice=0x8557 > > vendor = 'Intel Corporation' > > device = 'I210 Gigabit Network Connection' > > class = network > > subclass = ethernet > > igb2@pci0:5:0:0: class=0x020000 rev=0x03 hdr=0x00 vendor=0x8086 device=0x1533 subvendor=0x8086 subdevice=0x0002 > > vendor = 'Intel Corporation' > > device = 'I210 Gigabit Network Connection' > > class = network > > subclass = ethernet > > > # usbconfig > > ugen0.1: <XHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) > > ugen0.3: <UPS American Power Conversion> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (10mA) > > ugen0.4: <CP2112 HID I2C Bridge Silicon Labs> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) > > ugen0.5: <Virtual Hub American Megatrends, Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) > > ugen0.6: <Virtual CDROM American Megatrends, Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) > > ugen0.7: <Virtual HDisk Device American Megatrends, Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) > > ugen0.8: <Virtual Ethernet. American Megatrends, Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) > > ugen0.9: <Virtual Keyboard and Mouse American Megatrends, Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) > > > # camcontrol devlist > > <KINGSTON SEDC600M1920G SCEKH5.3> at scbus0 target 0 lun 0 (pass0,ada0) > > <KINGSTON SEDC600M1920G SCEKH5.3> at scbus1 target 0 lun 0 (pass1,ada1) > > <KINGSTON SEDC600M1920G SCEKH5.3> at scbus2 target 0 lun 0 (pass2,ada2) > > <AHCI SGPIO Enclosure 2.00 0001> at scbus8 target 0 lun 0 (ses0,pass3) > > <AMI Virtual CDROM0 1.00> at scbus9 target 0 lun 0 (cd0,pass4) > > <AMI Virtual HDisk0 1.00> at scbus10 target 0 lun 0 (da0,pass5) > > > > > I have scbus, da, xhci (not uhci, ohci or ehci), usb, usbhid, hkbd, > ukbd, umass in the kernel. > > > > Any hint? > > I have XHCI handoff disabled in the BIOS (from physical console), but I > see it as enabled if I connect through BMC!!! > Can this matter? > > bye & Thanks > av.home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?G6rYlkEQajmxqlgeLH7aOKqVBHji9jYT12eOiSVjFv4Xng-mBQlvLGI4BDxZrjQrdNIw4DpWfdwPBsNEJRirbG8w7hxzCRl8wrNqh_hwsnU=>