Date: Mon, 23 May 2011 16:17:08 +0100 From: "N.J. Mann" <njm@njm.me.uk> To: John Baldwin <jhb@freebsd.org> Cc: freebsd-hardware@freebsd.org Subject: Re: Sunix 4056A PCI 4 port RS-232 card - only 2 ports configured Message-ID: <20110523151708.GA671@titania.njm.me.uk> In-Reply-To: <201105231026.54178.jhb@freebsd.org> References: <20110522110002.GB91694@titania.njm.me.uk> <201105231026.54178.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
In message <201105231026.54178.jhb@freebsd.org>,
John Baldwin (jhb@freebsd.org) wrote:
> On Sunday, May 22, 2011 7:00:02 am N.J. Mann wrote:
> > Hi,
> >
> >
> > I am trying to setup a console server, but I am having a problem with
> > the hardware. The RS-232 card I am using is a Sunix 4056A Universal PCI
> > 4 port RS-232 card. However, only two ports are being configured, uart2
> > and uart3 - uart0 and uart1 are on the motherboard. I had assumed that
> > all I had to do was install the card, add puc(4) to my kernel and it
> > would just work.
> >
> > uname:
> > ------
> > FreeBSD 9.0-CURRENT #0: Thu May 19 15:01:10 UTC 2011 i386
> >
> > I CVSup'ed about fours before then.
> >
> >
> > relevant parts of verbose dmesg:
> > --------------------------------
> > found-> vendor=0x1409, dev=0x7168, revid=0x01
> > domain=0, bus=0, slot=10, func=0
> > class=07-00-02, hdrtype=0x00, mfdev=0
> > cmdreg=0x0081, statreg=0x0280, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=3
> > map[10]: type I/O Port, range 32, base 0xe000, size 5, enabled
> > map[14]: type I/O Port, range 32, base 0xe400, size 4, enabled
> > pcib0: matched entry for 0.10.INTA
> > pcib0: slot 10 INTA hardwired to IRQ 18
> > [...]
> > puc0: <Timedia technology 4 Port Serial> port 0xe000-0xe01f,0xe400-0xe40f
> > irq 18 at device 10.0 on pci0
> > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 52
> > uart2: <16550 or compatible> on puc0
> > uart2: fast interrupt
> > uart3: <16550 or compatible> on puc0
> > uart3: fast interrupt
> >
> >
> > I can provide a full verbose dmesg if required, together with any other
> > information which may be relevant.
> >
> > Any and all help gratefully received.
>
> Hmm, for Timedia it looks like the puc(4) driver uses the subvendor device ID
> to figure out how many ports your card has, but it does see 4 ports (the
> device descrption is correct). Does 'devinfo -v' show any other child
> devices of 'puc0' besides the two uart devices?
No.
puc0 pnpinfo vendor=0x1409 device=0x7168 subvendor=0x1409 subdevice=0x4056 class=0x070002 at slot=10 function=0
uart2
uart3
(If you want the complete output of devinfo just ask - I assumed from
your question you only wanted the puc-releated section.)
BTW I saw the patch for puc(4) you just posted to current@. Is it worth
me trying that?
Many thanks.
Cheers,
Nick.
--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110523151708.GA671>