Date: Tue, 3 Nov 2009 12:14:34 +0000 From: Rui Paulo <rpaulo@freebsd.org> To: Hans Petter Selasky <hselasky@freebsd.org> Cc: Rick van der Zwet <info@rickvanderzwet.nl>, Gavin Atkinson <gavin@freebsd.org>, freebsd-usb@freebsd.org, freebsd-current@freebsd.org Subject: Re: aue0 detected as ue0 on 8.0-RC2 Message-ID: <ADB61C07-6690-4DD3-BF2F-EA5B2C23C718@freebsd.org> In-Reply-To: <200911031203.22103.hselasky@freebsd.org> References: <5aaae08a0910311359v45cc9dc9h2826d8a29bfb5575@mail.gmail.com> <1257243047.98619.8.camel@buffy.york.ac.uk> <200911031203.22103.hselasky@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 3 Nov 2009, at 11:03, Hans Petter Selasky wrote: > On Tuesday 03 November 2009 11:10:47 Gavin Atkinson wrote: >> [freebsd-current cc'd, as that was where the thread started, but this >> probably belongs on -usb, replies should go there] >> >> On Sat, 2009-10-31 at 21:59 +0100, Rick van der Zwet wrote: >>> The first net interface of a aue(4) define used to be called aue0 >>> afaik. But is now called ue0 (declared in usb/net/usb_ethernet.c). >>> (no >>> sign of ue(4) btw). >>> >>> I was looking in the UPDATING, man, mailinglists freebsd-usb@ and >>> freebsd-current@. But I could not find the reason why the naming >>> convention on this aue differs from the regular stuff, anybody? >>> >>> /Rick >>> >>> quick# dmesg | tail -8 >>> ugen1.3: <ADMtek> at usbus1 >>> aue0: <ADMtek USB To LAN Converter, rev 2.00/1.01, addr 3> on usbus1 >>> miibus1: <MII bus> on aue0 >>> ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 >>> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>> ue0: <USB Ethernet> on aue0 >>> ue0: Ethernet address: 00:00:e8:00:11:36 >>> ue0: link state changed to DOWN >>> >>> quick# ifconfig -l >>> bfe0 lo0 ue0 >> >> Hmm, this looks like a serious bug, possibly in the new USB subsystem >> (HPS CC'd). >> >> I've got an axe(4) device, which also does the same: >> >> ugen7.3: <vendor 0x0b95> at usbus7 >> axe0: <vendor 0x0b95 product 0x7720, rev 2.00/0.01, addr 3> on usbus7 >> axe0: PHYADDR 0xe0:0x10 >> miibus1: <MII bus> on axe0 >> ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus1 >> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> ue0: <USB Ethernet> on axe0 >> ue0: Ethernet address: 00:50:b6:05:57:a7 >> ue0: link state changed to DOWN > > Hi, > > All USB ethernet adapters are now named ue0. You will get one axe0 > event and > one ue0 event. So there should be no problems regarding devd.conf . Fair enough, but this must be mentioned in src/UPDATING. -- Rui Paulo
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ADB61C07-6690-4DD3-BF2F-EA5B2C23C718>