Date: Thu, 26 Dec 1996 15:15:54 +0100 (MET) From: J Wunsch <j@uriah.heep.sax.de> To: freebsd-scsi@FreeBSD.org (FreeBSD SCSI list) Cc: jonny@mailhost.coppe.ufrj.br (Joao Carlos Mendes Luis), subsolar@flamingo1.fcom.com Subject: Re: Iomega SCSI Zip Drive Message-ID: <199612261415.PAA05373@uriah.heep.sax.de> In-Reply-To: <199612251934.RAA29325@gaia.coppe.ufrj.br> from Joao Carlos Mendes Luis at "Dec 25, 96 05:34:46 pm"
index | next in thread | previous in thread | raw e-mail
As Joao Carlos Mendes Luis wrote:
(driver for the SCSI Iomega Zip drive)
> // Doesn't it work for you?
>
> Aside from the drop to debugger when I change disks, its perfect.
Huh, that's not supposed to happen. Can you quote a little more from
your error messages?
You might also try experimenting with the `od' driver. It is better
targeted for the requirements of a changeable media device. In order
to register your Zip drive with the `od' driver, you gotta add a quirk
record to sys/scsi/scsconf.c. Something like:
Index: scsiconf.c
===================================================================
RCS file: /home/ncvs/src/sys/scsi/scsiconf.c,v
retrieving revision 1.73
diff -u -u -r1.73 scsiconf.c
--- scsiconf.c 1996/12/20 20:43:45 1.73
+++ scsiconf.c 1996/12/26 14:12:52
@@ -265,6 +265,10 @@
T_DIRECT, T_OPTICAL, T_REMOV, "RICOH", "RO-*", "*",
"od", SC_ONE_LU
},
+ {
+ T_DIRECT, T_OPTICAL, T_REMOV, "IOMEGA", "ZIP*", "*",
+ "od", SC_ONE_LU
+ },
#endif /* NOD */
#if NSD > 0
{
Of course, you need to replace the "ZIP*" by whatever you drive sends
as inquiry data (see the boot message logs). It's possible that the
above patch doesn't apply to non-current systems, i had to reorder
some of the entries in that table recently. But you should get the
picture.
--
cheers, J"org
joerg_wunsch@uriah.heep.sax.de -- http://www.sax.de/~joerg/ -- NIC: JW11-RIPE
Never trust an operating system you don't have sources for. ;-)
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199612261415.PAA05373>