Date: Fri, 08 Jan 2016 09:48:45 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-amd64@FreeBSD.org Subject: [Bug 205855] ICH7R identified as ICH9R, doesn't work in RAID mode Message-ID: <bug-205855-6-GgI1Em5zN6@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-205855-6@https.bugs.freebsd.org/bugzilla/> References: <bug-205855-6@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D205855 --- Comment #9 from arcadiy@ivanovy.net --- 10.2 dmesg.boot Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.2-STABLE #0 r293336: Thu Jan 7 12:45:10 EST 2016 admin@fw1.home.ivanovy.net:/usr/obj/usr/src/sys/FIREWALL amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz (2527.05-MHz K8-class = CPU) Origin=3D"GenuineIntel" Id=3D0x10676 Family=3D0x6 Model=3D0x17 Steppi= ng=3D6 =20 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,= MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x8e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,S= SE4.1> AMD Features=3D0x20100800<SYSCALL,NX,LM> AMD Features2=3D0x1<LAHF> TSC: P-state invariant, performance statistics real memory =3D 1073741824 (1024 MB) avail memory =3D 1020993536 (973 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <DELL FX09 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 random device not loaded; using insecure entropy ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20150515/tbfadt-644) ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 1= 6/8 (20150515/tbfadt-644) ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20150515/tbfadt-644) ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/8 (20150515/tbfadt-644) ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20150515/tbfadt-725) ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20150515/tbfadt-725) ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using def= ault 32 (20150515/tbfadt-725) ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd0 at kbdmux0 random: <Software, Yarrow> initialized smbios0: <System Management BIOS> at iomem 0xf0be0-0xf0bfe on motherboard smbios0: Version: 2.5, BCD Revision: 2.5 cryptosoft0: <software crypto> on motherboard acpi0: <DELL FX09 > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 device_attach: hpet0 attach returned 12 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xdf00-0xdf1f mem 0xfdae0000-0xfdafffff,0xfdac0000-0xfdadffff irq 16 at device 0.0 on pci1 em0: Using an MSI interrupt em0: Ethernet address: 00:15:17:85:7b:a2 em1: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xde00-0xde1f mem 0xfdaa0000-0xfdabffff,0xfda80000-0xfda9ffff irq 17 at device 0.1 on pci1 em1: Using an MSI interrupt em1: Ethernet address: 00:15:17:85:7b:a3 vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfdf00000-0xfdf7ffff,0xd0000000-0xdfffffff,0xfdc00000-0xfdcfffff irq 16 at device 2.0 on pci0 agp0: <Intel G33 SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 4194300k stolen memory vgapci0: Boot video device em2: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xfe00-0xfe1f mem 0xfdfc0000-0xfdfdffff,0xfdfff000-0xfdffffff irq 20 at device 25.0 on pci0 em2: Using an MSI interrupt em2: Ethernet address: 00:21:9b:0b:a0:8c uhci0: <Intel 82801I (ICH9) USB controller> port 0xfd00-0xfd1f irq 16 at de= vice 26.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0xfc00-0xfc1f irq 21 at de= vice 26.1 on pci0 usbus1 on uhci1 uhci2: <Intel 82801I (ICH9) USB controller> port 0xfb00-0xfb1f irq 19 at de= vice 26.2 on pci0 usbus2 on uhci2 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff i= rq 18 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 uhci3: <Intel 82801I (ICH9) USB controller> port 0xfa00-0xfa1f irq 23 at de= vice 29.0 on pci0 usbus4 on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0xf900-0xf91f irq 19 at de= vice 29.1 on pci0 usbus5 on uhci4 uhci5: <Intel 82801I (ICH9) USB controller> port 0xf800-0xf81f irq 18 at de= vice 29.2 on pci0 usbus6 on uhci5 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffd000-0xfdffd3ff i= rq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH8 AHCI SATA controller> port 0xf700-0xf707,0xf600-0xf603,0xf500-0xf507,0xf400-0xf403,0xf300-0xf31f mem 0xfdffc000-0xfdffc7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x500-0x51f mem 0xfdffb000-0xfdffb0ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 acpi_tz0: <Thermal Zone> on acpi0 ichwd0 on isa0 orm0: <ISA Option ROMs> at iomem 0xcc000-0xcefff,0xcf000-0xd2fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen5.1: <Intel> at usbus5 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen4.1: <Intel> at usbus4 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST380815AS 4.ADA> ATA-7 SATA 2.x device ada0: Serial Number 5RW48EHG ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 76293MB (156250000 512 byte sectors) ada0: Previously was known as ad0 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <ST380815AS 4.ADA> ATA-7 SATA 2.x device ada1: Serial Number 5RW475QJ ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 76293MB (156250000 512 byte sectors) ada1: Previously was known as ad1 pass2 at ahcich4 bus 0 scbus4 target 0 lun 0 pass2: <TSSTcorp DVD+-RW TS-H653F D200> Removable CD-ROM SCSI device pass2: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) pass3 at ahciem0 bus 0 scbus6 target 0 lun 0 pass3: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device GEOM_RAID: Intel-29b44d78: Array Intel-29b44d78 created. GEOM_RAID: Intel-29b44d78: Disk ada0 state changed from NONE to ACTIVE. GEOM_RAID: Intel-29b44d78: Subdisk Volume0:0-ada0 state changed from NONE to ACTIVE. GEOM_RAID: Intel-29b44d78: Disk ada1 state changed from NONE to ACTIVE. GEOM_RAID: Intel-29b44d78: Subdisk Volume0:1-ada1 state changed from NONE to ACTIVE. GEOM_RAID: Intel-29b44d78: Array started. GEOM_RAID: Intel-29b44d78: Volume Volume0 state changed from STARTING to OPTIMAL. GEOM_RAID: Intel-29b44d78: Provider raid/r0 for volume Volume0 created. SMP: AP CPU #1 Launched! hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/40/0x67<INT,USR,SYS,REA,WRI> Timecounter "TSC-low" frequency 1263524823 Hz quality 1000 Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 us= bus0 uhub2: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered Root mount waiting for: usbus7 usbus3 Root mount waiting for: usbus7 usbus3 uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/raid/r0s1a [rw]... ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 2> on usbus5 kbd1 at ukbd0 . got link em1: link state changed to UP ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled DUMMYNET 0 with IPv6 initialized (100409) load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched PRIO loaded --=20 You are receiving this mail because: You are on the CC list for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-205855-6-GgI1Em5zN6>