Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 08 Nov 2004 23:25:08 +0100
From:      Ronald Klop <ronald-freebsd8@klop.yi.org>
To:        freebsd-stable@freebsd.org
Subject:   pccard modem and ethernet don't work together
Message-ID:  <opsg5276wv8527sy@smtp.local>

next in thread | raw e-mail | index | archive | help
Hello,

I posted the same text as below to current@ on 20 Oct, but got no answer.
Is there somebody here who knows more about this or can tell me where to  
look further?
I got a 'me too' message from somebody who googled my previous question,  
so there are more people with this problem.

Ronald.

--- original mail below ---

My laptop will not recognize my pccard modem and pccard ethernet if I
insert them both.
When I only insert my modem it detects:
Oct 19 21:34:13 laptop kernel: pccard0: Allocation failed for cfe 15
Oct 19 21:34:13 laptop kernel: sio4: <PCMCIA MAKER 56K V.90 DataFax
Modem(LN)> at port 0x2f8-0x2ff irq 11 function 0 config 23 on pccard0
Oct 19 21:34:13 laptop kernel: sio4: type 16550A
Oct 19 21:34:13 laptop kernel: sio4: unable to activate interrupt in fast
mode - using normal mode

When I only insert my ethernet it detects:
Oct 19 20:48:44 laptop kernel: ep0: <3Com Megahertz 589E> at port
0x100-0x10f irq 11 function 0 config 1 on pccard0
Oct 19 20:48:44 laptop kernel: ep0: Ethernet address: 00:50:da:d1:01:25

When I insert both the ethernet and the modem it detects:
Oct 19 21:26:44 laptop kernel: ep0: <3Com Megahertz 589E> at port
0x100-0x10f irq 11 function 0 config 1 on pccard0
Oct 19 21:26:44 laptop kernel: ep0: Ethernet address: 00:50:da:d1:01:25
Oct 19 21:26:44 laptop kernel: pccard1: Allocation failed for cfe 15
Oct 19 21:26:44 laptop kernel: sio4: <PCMCIA MAKER 56K V.90 DataFax
Modem(LN)> at port 0x2f8-0x2ff irq 11 function 0 config 23 on pccard1
Oct 19 21:26:44 laptop kernel: device_attach: sio4 attach returned 6

What can I supply to help debugging this?
Should I toggle some sysctl switches?
My dmesg is added below.

Hope, somebody can help me with this.

Ronald.



> uname -a
FreeBSD laptop 5.3-BETA7 FreeBSD 5.3-BETA7 #55: Thu Oct 14 16:06:04 CEST
2004     root@guido.thuis.klop.ws:/usr/obj/usr/src/sys/LAPTOP  i386

> cat /var/run/dmesg.boot
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA7 #55: Thu Oct 14 16:06:04 CEST 2004
      root@guido.thuis.klop.ws:/usr/obj/usr/src/sys/LAPTOP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (266.68-MHz 686-class CPU)
    Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
    Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 100622336 (95 MB)
avail memory = 92979200 (88 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 0.1 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at
device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at
device 12.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
isab0: <PCI-ISA bridge> at device 14.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port
0x1000-0x100f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 14.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, USB> at device 14.2 (no driver attached)
cpu0 on motherboard
pmtimer0 on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
sbc0: <ESS ES1879> at port 0x330-0x331,0x388-0x38b,0x220-0x22f irq 5 drq
0,1 on isa0
sbc0: [GIANT-LOCKED]
pcm0: <ESS 18xx DSP> on sbc0
pcm0: [GIANT-LOCKED]
Timecounters tick every 4.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default
to deny, logging unlimited
ad0: 9590MB <FUJITSU MHN2100AT/7256> [19485/16/63] at ata0-master PIO4
pccard0: Allocation failed for cfe 15
sio4: <PCMCIA MAKER 56K V.90 DataFax Modem(LN)> at port 0x2f8-0x2ff irq 11
function 0 config 23 on pccard0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /mnt/oldtmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 32 files 1
/var: superblock summary recomputed

-- 
  Ronald Klop, Amsterdam, The Netherlands



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?opsg5276wv8527sy>