Date: Mon, 17 May 2004 13:05:12 -0500 From: Edwin Culp <eculp@encontacto.net> To: current@freebsd.org Subject: Re: ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=0 Message-ID: <20040517130512.ax8o8wkgk4804csc@mail.encontacto.net> In-Reply-To: <20040517174621.34F955D0A@ptavv.es.net> References: <20040517174621.34F955D0A@ptavv.es.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Quoting Kevin Oberman <oberman@es.net>: >> Date: Mon, 17 May 2004 12:38:55 -0500 >> From: Edwin Culp <eculp@encontacto.net> >> Sender: owner-freebsd-current@freebsd.org >> >> I'm running current as of yesterday. I connected an older >> current disk [probably 6 months] that has some important >> information. I thought that it would be trivial to mount it and >> copy the info to my current disk. I tried and am getting: >> >> ad2: 29311MB <Maxtor 53073U6> [59554/16/63] at ata1-master UDMA66 >> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 >> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 >> ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR> >> error=84<ICRC,ABORTED> LBA=0 >> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 >> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 >> ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR> >> error=84<ICRC,ABORTED> LBA=0 >> >> Could this be caused by changes in current, a configuration issue >> that I'm missing or is it a probable hardware failure? > > Probably not a useful suggestion, but is the disk jumpered as MASTER? 'ad2' > is normally the master of the second IDE bus. Thanks, Kevin. Yes it is jumpered as master. I'm assuming that it should be done that way. Maybe I should take the jumper off and see what happens. I assume it would come up as ad3. Thanks, again. ed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040517130512.ax8o8wkgk4804csc>