Date: Fri, 23 Jan 2004 20:50:08 +0000 From: Michael McGoldrick <michael@mcgoldrick.org> To: current@freebsd.org Cc: sos@deepcore.dk Subject: Re: ATA question Message-ID: <20040123205008.GA1269@uriel.mcgoldrick.org> In-Reply-To: <400DA105.8000105@DeepCore.dk> References: <20040120192745.GA1209@uriel.mcgoldrick.org> <400DA105.8000105@DeepCore.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
--9jxsPFA5p3P2qPhR
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Tue, Jan 20, 2004 at 10:43:33PM +0100, S?ren Schmidt wrote:
> Michael McGoldrick wrote:
> >Hi,
> >I recently bought a Hitachi Deskstar drive (HDS722516VLAT80) onto which I
> >was
> >hoping to transfer my existing set up (since my current IBM drive has been
> >making some funny noises and 'lost' a partition table last year).
> >However, I am unable to partition this drive. I get a lot of errors like:
> >ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
> >ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
> >ad3: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
> >LBA=0
>
> Hmm ICRC errors mean that there are cable problems of some sort.
> I cannot tell what you have since you havn't provided me with any info
> on your configuration.
> Please mail me the output of "dmesg" so I can get an idea of what we
> have here...
>
> -S?ren
Another data point; Hitachi's drive fitness test thinks the disk is OK.
I have attached a verbose dmesg, in case that provides any more information,
although I am coming to the conclusion this motherboard is just dodgy.
--
Michael McGoldrick: michael@mcgoldrick.org
--9jxsPFA5p3P2qPhR
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesgv
ACPI debug layer 0x0 debug level 0x0
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #55: Wed Jan 21 19:39:48 GMT 2004
root@uriel.mcgoldrick.org:/usr/obj/usr/src/sys/URIEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ac1000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc0ac11d8.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0ac1228.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc0ac12d4.
Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc0ac1380.
Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc0ac142c.
Calibrating clock(s) ... i8254 clock: 1193084 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 546619549 Hz
CPU: Intel Pentium III (546.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (127 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x0000000007d7ffff, 118857728 bytes (29018 pages)
avail memory = 121405440 (115 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0280
bios32: Entry = 0xf0210 (c00f0210) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0200+0x0
pnpbios: Found PnP BIOS data at 0xc00f5f50
pnpbios: Entry = f9e00:0 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
acpi0: <Acer M1615> on motherboard
evgpeblk-0980: *** Error: GPE0 block (GPE 0 to 15) overlaps the GPE1 block (GPE 10 to 25) - Ignoring GPE1
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010064
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=162110b9)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f7900
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 3 4 5 6 7 9 10 11 12
embedded 0 1 B 0x02 3 4 5 6 7 9 10 11 12
embedded 0 1 C 0x03 3 4 5 6 7 9 10 11 12
embedded 0 1 D 0x04 3 4 5 6 7 9 10 11 12
embedded 0 11 A 0x04 3 4 5 6 7 9 10 11 12
embedded 0 2 A 0x59 3 4 5 6 7 9 10 11 12
slot 1 0 20 A 0x01 3 4 5 6 7 9 10 11 12
slot 1 0 20 B 0x02 3 4 5 6 7 9 10 11 12
slot 1 0 20 C 0x03 3 4 5 6 7 9 10 11 12
slot 1 0 20 D 0x04 3 4 5 6 7 9 10 11 12
slot 2 0 19 A 0x02 3 4 5 6 7 9 10 11 12
slot 2 0 19 B 0x03 3 4 5 6 7 9 10 11 12
slot 2 0 19 C 0x04 3 4 5 6 7 9 10 11 12
slot 2 0 19 D 0x01 3 4 5 6 7 9 10 11 12
slot 3 0 16 A 0x03 3 4 5 6 7 9 10 11 12
slot 3 0 16 B 0x04 3 4 5 6 7 9 10 11 12
slot 3 0 16 C 0x01 3 4 5 6 7 9 10 11 12
slot 3 0 16 D 0x02 3 4 5 6 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PILA irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PILD irq 11: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PILA irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.20.0
\\_SB_.PILB irq 10: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.20.1
\\_SB_.PILC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.20.2
\\_SB_.PILD irq 11: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.20.3
\\_SB_.PILB irq 10: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.0
\\_SB_.PILC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.1
\\_SB_.PILD irq 11: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.2
\\_SB_.PILA irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.3
\\_SB_.PILC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.0
\\_SB_.PILD irq 11: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.1
\\_SB_.PILA irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.2
\\_SB_.PILB irq 10: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.3
\\_SB_.PILE irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PILA irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PILD irq 11: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PILA irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.20.0
\\_SB_.PILB irq 10: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.20.1
\\_SB_.PILC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.20.2
\\_SB_.PILD irq 11: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.20.3
\\_SB_.PILB irq 10: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.0
\\_SB_.PILC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.1
\\_SB_.PILD irq 11: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.2
\\_SB_.PILA irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.3
\\_SB_.PILC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.0
\\_SB_.PILD irq 11: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.1
\\_SB_.PILA irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.2
\\_SB_.PILB irq 10: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.16.3
\\_SB_.PILE irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x10b9, dev=0x1621, revid=0x05
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2410, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10b9, dev=0x5247, revid=0x01
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 90800000, size 12, enabled
pcib0: matched entry for 0.2.INTA (source \\_SB_.PILE)
pcib0: slot 2 INTA is routed to irq 5
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=5
found-> vendor=0x10b9, dev=0x1533, revid=0xc3
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x000f, statreg=0x3200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 90400000, size 12, enabled
map[14]: type 1, range 32, base 90500000, size 20, enabled
pcib0: matched entry for 0.11.INTA (source \\_SB_.PILD)
pcib0: slot 11 INTA is routed to irq 11
found-> vendor=0x1013, dev=0x6003, revid=0x01
bus=0, slot=11, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00008400, size 4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc1
bus=0, slot=15, func=0
class=01-01-fa, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
map[10]: type 1, range 32, base 82101000, size 12, enabled
pcib0: matched entry for 0.16.INTB (source \\_SB_.PILD)
pcib0: slot 16 INTB is routed to irq 11
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=16, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base 82102000, size 12, enabled
pcib0: matched entry for 0.16.INTC (source \\_SB_.PILA)
pcib0: slot 16 INTC is routed to irq 9
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=16, func=1
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=c, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base 82103000, size 12, enabled
pcib0: matched entry for 0.16.INTD (source \\_SB_.PILB)
pcib0: slot 16 INTD is routed to irq 10
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=16, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base 82100400, size 8, enabled
pcib0: matched entry for 0.16.INTA (source \\_SB_.PILC)
pcib0: slot 16 INTA is routed to irq 5
found-> vendor=0x10b9, dev=0x5239, revid=0x01
bus=0, slot=16, func=3
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00008000, size 8, enabled
map[14]: type 1, range 32, base 82100000, size 8, enabled
pcib0: matched entry for 0.19.INTA (source \\_SB_.PILB)
pcib0: slot 19 INTA is routed to irq 10
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=19, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <Ali Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0x80100000-0x820fffff
pcib1: prefetched decode 0x82200000-0x900fffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base 81000000, size 24, enabled
map[14]: type 3, range 32, base 88000000, size 27, enabled
map[18]: type 3, range 32, base 82200000, size 19, enabled
pcib0: matched entry for 0.1.INTA (source \\_SB_.PILA)
pcib0: slot 1 INTA is routed to irq 9
pcib1: slot 0 INTA is routed to irq 9
found-> vendor=0x10de, dev=0x0171, revid=0xa3
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
nvidia0: <GeForce4 MX 440> mem 0x82200000-0x8227ffff,0x88000000-0x8fffffff,0x81000000-0x81ffffff irq 9 at device 0.0 on pci1
pcib1: device nvidia0 requested decoded memory range 0x81000000-0x81ffffff
pcib1: device nvidia0 requested decoded memory range 0x88000000-0x8fffffff
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x90800000-0x90800fff irq 5 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Atmel Standard USB Hub, class 9/0, rev 1.10/3.00, addr 2
uhub1: 4 ports with 4 removable, self powered
umass0: PQI Travel Flash, rev 1.10/2.05, addr 3
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 4, iclass 3/1
ums0: 3 buttons and Z dir.
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0x90500000-0x905fffff,0x90400000-0x90400fff irq 11 at device 11.0 on pci0
csa: card is Unknown/invalid SSID (CS4614)
pcm0: <CS461x PCM Audio> on csa0
pcm0: <Cirrus Logic CS4297 AC97 Codec (id = 0x43525903)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 6 bit master volume, no 3D Stereo Enhancement
pcm0: sndbuf_setmap 203000, 1000; 0xc2a2f000 -> 203000
pcm0: sndbuf_setmap 205000, 1000; 0xc2a31000 -> 205000
atapci0: <AcerLabs Aladdin UDMA33 controller> port 0x8400-0x840f at device 15.0 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x82101000-0x82101fff irq 11 at device 16.0 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb1: USB revision 1.0
uhub2: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x82102000-0x82102fff irq 9 at device 16.1 on pci0
usb2: OHCI version 1.0, legacy support
usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2
usb2: USB revision 1.0
uhub3: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ohci3: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x82103000-0x82103fff irq 10 at device 16.2 on pci0
usb3: OHCI version 1.0, legacy support
usb3: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci3
usb3: USB revision 1.0
uhub4: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x82100400-0x821004ff irq 5 at device 16.3 on pci0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub5: AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem 0x82100000-0x821000ff irq 10 at device 19.0 on pci0
rl0: Ethernet address: 00:60:67:76:6e:bf
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 3 func 0
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
pcm: pcm0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 failed to probe on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
18 18 18 18 1f 00 00 00 18 18 18 18 ff 00 00 00
00 00 00 00 ff 18 18 18 18 18 18 18 1f 18 18 18
00 00 00 00 ff 00 00 00 18 18 18 18 ff 18 18 18
18 18 1f 18 1f 18 18 18 36 36 36 36 37 36 36 36
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 546619549 Hz quality 800
Timecounters tick every 10.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata0-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=40pin
ata0-master: setting PIO4 on AcerLabs Aladdin chip
ata0-master: setting UDMA33 on AcerLabs Aladdin chip
ata0-slave: setting PIO4 on AcerLabs Aladdin chip
GEOM: create disk ad0 dp=0xc2a78e60
ad0: <ST310212A/3.02> ATA-5 disk at ata0-master
ad0: 9768MB (20005650 sectors), 19846 C, 16 H, 63 S, 512 B
ad0: 1 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
[0] f:80 typ:11 s(CHS):0/1/1 e(CHS):517/254/63 s:63 l:8321607
[1] f:00 typ:165 s(CHS):518/0/1 e(CHS):580/254/63 s:8321670 l:1012095
[2] f:00 typ:15 s(CHS):581/0/1 e(CHS):1023/254/63 s:9333765 l:10651095
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 4260662784 end 4260695039
GEOM: Configure ad0s2, start 4260695040 length 518192640 end 4778887679
GEOM: Configure ad0s3, start 4778887680 length 5453360640 end 10232248319
GEOM: Configure ad0s2b, start 0 length 518192640 end 518192639
GEOM: Configure ad0s2c, start 0 length 518192640 end 518192639
acd0: <SAMSUNG COMBO SM-304B/BS03> CDRW drive at ata0 as slave
acd0: 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata1-master: setting PIO4 on AcerLabs Aladdin chip
ata1-master: setting UDMA33 on AcerLabs Aladdin chip
ata1-slave: setting PIO4 on AcerLabs Aladdin chip
ata1-slave: setting UDMA33 on AcerLabs Aladdin chip
GEOM: create disk ad2 dp=0xc2a78660
ad2: <IBM-DTLA-305040/TW4OA60A> ATA-5 disk at ata1-master
ad2: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
ad2: 1 secs/int, 1 depth queue, UDMA33
MBREXT Slice 5 on ad0s3:
[0] f:00 typ:7 s(CHS):581/1/1 e(CHS):1023/254/63 s:63 l:10651032
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s5, start 32256 length 5453328384 end 5453360639
GEOM: create disk ad3 dp=0xc2a78a60
ad3: <HDS722516VLAT80/V34OA60A> ATA-6 disk at ata1-slave
ad3: 157066MB (321672960 sectors), 319120 C, 16 H, 63 S, 512 B
ad3: 1 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad2
GEOM: new disk ad3
[0] f:00 typ:5 s(CHS):1/0/1 e(CHS):637/254/63 s:16065 l:10233405
[1] f:80 typ:165 s(CHS):638/0/1 e(CHS):1023/254/63 s:10249470 l:31150035
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:12 s(CHS):1023/1/1 e(CHS):1023/254/63 s:41399568 l:39005757
GEOM: Configure ad2s1, start 8225280 length 5239503360 end 5247728639
GEOM: Configure ad2s2, start 5247728640 length 15948817920 end 21196546559
GEOM: Configure ad2s4, start 21196578816 length 19970947584 end 41167526399
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):925/15/63 s:63 l:125828577
[1] f:00 typ:12 s(CHS):926/0/1 e(CHS):957/15/63 s:125828640 l:2096640
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):958/8/9 e(CHS):958/8/8 s:127925792 l:0
GEOM: Configure ad3s1, start 32256 length 64424231424 end 64424263679
GEOM: Configure ad3s2, start 64424263680 length 1073479680 end 65497743359
MBREXT Slice 5 on ad2s1:
[0] f:00 typ:11 s(CHS):1/1/1 e(CHS):637/254/63 s:63 l:10233342
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s5, start 32256 length 5239471104 end 5239503359
GEOM: Configure ad2s2a, start 0 length 125829120 end 125829119
GEOM: Configure ad2s2b, start 125829120 length 524288000 end 650117119
GEOM: Configure ad2s2c, start 0 length 15948817920 end 15948817919
GEOM: Configure ad2s2e, start 650117120 length 15298700800 end 15948817919
GEOM: Configure ad3s1a, start 0 length 524288000 end 524287999
GEOM: Configure ad3s1b, start 524288000 length 1048576000 end 1572863999
GEOM: Configure ad3s1c, start 0 length 64424231424 end 64424231423
GEOM: Configure ad3s1e, start 1572864000 length 62851367424 end 64424231423
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=64
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3072064
ad3: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3072064
GEOM: create disk da0 dp=0xc2adbc50
GEOM: create disk da1 dp=0xc2a75050
GEOM: create disk da2 dp=0xc2a73c50
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <General Flash Disk Drive 2.05> Removable Direct Access SCSI-2 device
pass0: Serial Number ST92163-2000
pass0: 1.000MB/s transfers
pass1 at umass-sim0 bus 0 target 0 lun 1
pass1: <General Flash Disk Drive 2.05> Removable Direct Access SCSI-2 device
pass1: Serial Number ST92163-2000
pass1: 1.000MB/s transfers
pass2 at umass-sim0 bus 0 target 0 lun 2
pass2: <General Flash Disk Drive 2.05> Removable Direct Access SCSI-2 device
pass2: Serial Number ST92163-2000
pass2: 1.000MB/s transfers
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <General Flash Disk Drive 2.05> Removable Direct Access SCSI-2 device
da0: Serial Number ST92163-2000
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <General Flash Disk Drive 2.05> Removable Direct Access SCSI-2 device
da1: Serial Number ST92163-2000
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <General Flash Disk Drive 2.05> Removable Direct Access SCSI-2 device
da2: Serial Number ST92163-2000
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
Mounting root from ufs:/dev/ad2s2a
start_init: trying /sbin/init
linprocfs registered
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
--9jxsPFA5p3P2qPhR--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040123205008.GA1269>