Date: Sun, 01 Feb 2009 23:57:48 +0300 From: Alexey Ivanov <need4spam@bk.ru> To: freebsd-current@freebsd.org Subject: powernow0: set freq failed, err 6 Message-ID: <E1LTjO0-000OdA-00.need4spam-bk-ru@f59.mail.ru>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I have repeating errors in /var/log/messages [PH34R] ~> tail -f /var/log/messages Feb 1 23:34:34 PH34R kernel: powernow0: set freq failed, err 6 Feb 1 23:34:34 PH34R kernel: powernow1: set freq failed, err 6 Feb 1 23:34:34 PH34R kernel: powernow0: set freq failed, err 6 Feb 1 23:34:34 PH34R kernel: powernow1: set freq failed, err 6 Feb 1 23:34:34 PH34R kernel: powernow0: set freq failed, err 6 Feb 1 23:34:41 PH34R last message repeated 17 times Now freq on my notebook is cut by about a half dev.cpu.0.freq: 1194 I don't know is it connected, but it first strted when i installed linux 2.6.28 and rebooted from it. Similiar problem here http://lists.freebsd.org/pipermail/freebsd-current/2008-December/001401.html as i know Keda is using same hardware: notebook HP 6715s dmesg attached [-- Attachment #2 --] Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #20: Wed Jan 28 06:09:17 MSK 2009 savetherbtz@PH34R:/usr/obj/usr/src/sys/PH34R.8 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1994.94-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> Cores per package: 2 real memory = 1476067328 (1407 MB) avail memory = 1423880192 (1357 MB) ACPI APIC Table: <HP 0944 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Error (tbfadt-0516): 32/64X address mismatch in "Pm2ControlBlock": [ 8800] [ 0 8100], using 64X [20070320] ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard acpi0: <HPQOEM SLIC-MPC> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) unknown: I/O range not supported acpi0: reservation of 0, 8000000 (3) failed acpi0: reservation of 100000, fff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0000000-0xc7ffffff,0xd0200000-0xd020ffff,0xd0300000-0xd03fffff irq 19 at device 5.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci16: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16 miibus0: <MII bus> on bge0 brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bge0: Ethernet address: 00:1a:4b:6b:88:cc bge0: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci32: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci48: <ACPI PCI bus> on pcib4 ndis0: <Broadcom 802.11a/b/g WLAN> mem 0xc8000000-0xc8003fff irq 18 at device 0.0 on pci48 ndis0: [ITHREAD] ndis0: NDIS API version: 5.1 atapci0: <ATI IXP600 SATA300 controller> port 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 4 ports PM not supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: port not implemented ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: port not implemented ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: port not implemented ata5: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xd0401000-0xd0401fff irq 23 at device 19.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xd0402000-0xd0402fff irq 17 at device 19.1 on pci0 ohci1: [ITHREAD] usbus1: <OHCI (generic) USB controller> on ohci1 ohci2: <OHCI (generic) USB controller> mem 0xd0403000-0xd0403fff irq 17 at device 19.2 on pci0 ohci2: [ITHREAD] usbus2: <OHCI (generic) USB controller> on ohci2 ohci3: <OHCI (generic) USB controller> mem 0xd0404000-0xd0404fff irq 17 at device 19.3 on pci0 ohci3: [ITHREAD] usbus3: <OHCI (generic) USB controller> on ohci3 ohci4: <OHCI (generic) USB controller> mem 0xd0405000-0xd0405fff irq 17 at device 19.4 on pci0 ohci4: [ITHREAD] usbus4: <OHCI (generic) USB controller> on ohci4 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0406000-0xd04060ff irq 23 at device 19.5 on pci0 ehci0: [ITHREAD] usbus5: EHCI version 1.0 usbus5: <EHCI (generic) USB 2.0 controller> on ehci0 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5040-0x504f irq 16 at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] hdac0: <ATI SB600 High Definition Audio Controller> irq 16 at device 20.2 on pci0 hdac0: HDA Driver Revision: 20090126_0126 hdac0: [ITHREAD] isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib5 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd0100000-0xd0100fff irq 20 at device 4.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [FILTER] battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Synaptics Touchpad, device ID 3 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 powernow1: <PowerNow! K8> on cpu1 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. Timecounters tick every 10.000 msec IPsec: Initialized Security Association Processing. ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding enabled, default to accept, logging limited to 10 packets/entry by default usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 acd0: DVDR <MATSHITADVD-RAM UJ-861H/1.50> at ata0-master PIO4 ugen0.1: <ATI> at usbus0 ushub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 ushub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 ushub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 ushub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 ushub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 ushub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ad4: 152627MB <Seagate ST9160827AS 3.AAA> at ata2-master SATA300 hdac0: HDA Codec #0: Analog Devices AD1981HD hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown) pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0 GEOM: ad4s2: geometry does not match label (255h,63s != 16h,63s). ushub0: 2 ports with 2 removable, self powered ushub1: 2 ports with 2 removable, self powered ushub2: 2 ports with 2 removable, self powered ushub3: 2 ports with 2 removable, self powered ushub4: 2 ports with 2 removable, self powered acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata0:0:0:0): CAM Status: SCSI Status Error (probe0:ata0:0:0:0): SCSI Status: Check Condition (probe0:ata0:0:0:0): NOT READY asc:3a,1 (probe0:ata0:0:0:0): Medium not present - tray closed (probe0:ata0:0:0:0): Unretryable error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata0:0:0:0): CAM Status: SCSI Status Error (probe0:ata0:0:0:0): SCSI Status: Check Condition (probe0:ata0:0:0:0): NOT READY asc:3a,1 (probe0:ata0:0:0:0): Medium not present - tray closed (probe0:ata0:0:0:0): Unretryable error ushub5: 10 ports with 10 removable, self powered cd0 at ata0 bus 0 target 0 lun 0 cd0: <MATSHITA DVD-RAM UJ-861H 1.50> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s2a ugen0.2: <Broadcom Corp> at usbus0 ubt0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/1.00, addr 2> on usbus0 GEOM_ELI: Device ad4s2f.eli created. GEOM_ELI: Encryption: Blowfish-CBC 448 GEOM_ELI: Crypto: software GEOM_ELI: Device ad4s2h.eli created. GEOM_ELI: Encryption: CAMELLIA-CBC 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ad4s2b.eli created. GEOM_ELI: Encryption: AES-CBC 256 GEOM_ELI: Crypto: software wlan0: Ethernet address: 00:1a:73:8c:08:32 WARNING: attempt to net_add_domain(bluetooth) after domainfinalize()
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1LTjO0-000OdA-00.need4spam-bk-ru>