Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 28 Apr 2025 15:32:48 +0100 (BST)
From:      Mark Phillips <mark@freebsdfoundation.org>
To:        "Bjoern A. Zeeb" <bz@freebsd.org>
Cc:        FreeBSD wireless mailing list <wireless@freebsd.org>
Subject:   Re: 2 patches to test/review
Message-ID:  <53f5b5c5-931c-a8ab-64d9-7e1cfa4a6a09@freebsdfoundation.org>
In-Reply-To: <09posn58-3588-s2ns-3q40-13s490s22632@SerrOFQ.bet>

index | next in thread | previous in thread | raw e-mail

On Sun, 27 Apr 2025, Bjoern A. Zeeb wrote:

> Hi,
>
> I have two patches pending in review:
>
> (1) add better VHT160 support to net80211 (and LinuxKPI 802.11):
>    https://reviews.freebsd.org/D49773

I've applied this and am currently testing it Bjoern. It's working fine, 
but I'm not seeing any difference I must confess :(

Incidentally, I created a guest network on my Deco wireless, and only 
enabled 5ghz. That's at least forcing my laptop to choose it over 2.4.

ifconfig -v wlan0 is below. If there's any further information I can 
gather, please just ask :)

Many thanks!

--Mark


wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
 	options=0
 	ether 08:b4:d2:fe:d1:a7
 	inet 192.168.NNNNNN netmask 0xffffff00 broadcast 192.168.98.255
 	inet6 fe80::ab4:d2ff:fefe:d1a7%wlan0 prefixlen 64 scopeid 0x2
 	groups: wlan
 	ssid BBBBBBB_Guest channel 36 (5180 MHz 11a vht/80+) bssid ce:c9:e3:99:b6:5d
 	regdomain ETSI country GB anywhere -ecm authmode WPA2/802.11i -wps
 	-tsn privacy ON deftxkey UNDEF
 	AES-CCM 2:128-bit
 	powersavemode OFF powersavesleep 100 txpower 23 txpowmax 50.0 -dotd
 	rtsthreshold 2346 fragthreshold 2346 bmiss 7
 	11a     ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
 	11b     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
 	11g     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
 	11na    ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
 	11ng    ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
 	11ac    ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
 	scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250
 	roam:11a     rssi    7dBm rate 12 Mb/s
 	roam:11b     rssi    7dBm rate  1 Mb/s
 	roam:11g     rssi    7dBm rate  5 Mb/s
 	roam:11na    rssi    7dBm  MCS  1
 	roam:11ng    rssi    7dBm  MCS  1
 	roam:11ac    rssi    7dBm  MCS  1
 	-pureg protmode CTS ht htcompat -ampdutx ampdurx ampdulimit 64k
 	ampdudensity NA -amsdutx amsdurx shortgi htprotmode RTSCTS -puren
 	-smps -rifs stbc -ldpctx ldpcrx -uapsd vht vht40 vht80 -vht160
 	vht80p80 wme -burst -dwds roaming MANUAL bintval 100
 	AC_BE cwmin  4 cwmax 10 aifs  3 txopLimit   0 -acm ack
 	      cwmin  0 cwmax  0 aifs  0 txopLimit   0 -acm
 	AC_BK cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm ack
 	      cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm
 	AC_VI cwmin  3 cwmax  4 aifs  2 txopLimit  94 -acm ack
 	      cwmin  0 cwmax  0 aifs  0 txopLimit   0 -acm
 	AC_VO cwmin  2 cwmax  3 aifs  2 txopLimit  47 -acm ack
 	      cwmin  0 cwmax  0 aifs  0 txopLimit   0 -acm
 	parent interface: iwlwifi0
 	media: IEEE 802.11 Wireless Ethernet autoselect mode 11ac
 	status: associated
 	nd6 options=1<PERFORMNUD>
 	drivername: wlan0


home | help

Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53f5b5c5-931c-a8ab-64d9-7e1cfa4a6a09>